Recommended Posts

Microsoft claims

Windows users running 64-bit versions of the operating system are less likely to get infected by attack code. According to Microsoft's security team said that 64-bit Windows has some of the lowest reported malware infection rates in the first half of 2009.

According to the Microsoft Malware Protection Center 64-bit malware is still exceedingly rare in the wild. Based on data gleened from Microsoft's Malicious Software Removal Tool (MSRC) the 64-bit version of Windows XP was 48 per cent less likely to be infected than the 32-bit edition during the first half of 2009; PCs running Vista 64-bit, meanwhile, were 35 per cent less likely to be infected than Vista 32-bit.

The blog said that that Windows 7 64-bit is the dominant flavor of that new OS as he touted its security. The blog claims that 64-bit Windows was safer by design than the less-powerful 32-bit version, ticking off such measures as PatchGuard, which makes it more difficult for malware to tamper with the operating system's kernel.

source

Link to comment
https://www.neowin.net/forum/topic/846834-windows-64-bit-is-safer/
Share on other sites

Heh. How many people here have EVER encountered PatchGuard? None, I bet.

It's just what redfox says, 64-bit is too fringe for anyone to bother making malware for it. The malware it does have will be of the 32-bit variety that still works because it doesn't mess with any parts of the system that are 64-bit only.

Overall, 64-bit is safer for the same reason Macs and Linux are: number of users.

If I'm going to spend an hour writing code to disable systems, would I rather spend

that hour and effect 1 million systems, or 20 million?

Look at the number of "dangerous" websites. You know what MOST of them have in common? Porn. They either have porn, or just advertise it to get you to the site. Why? Because there's more people searching for porn that anything else. It's all in the numbers of potential victims.

64 bit users arent safer than 32bit users. 32 bit malware still works on 64 bit hardware.

if anything 64 bit users are more at risk as they could be infected with 64bit malware as well as 32bit malware, 32bit users dont have this problem.

Nothing to do with patchguard and the other x64 security features in your highly qualified opinion then... :rolleyes:

64 bit users arent safer than 32bit users. 32 bit malware still works on 64 bit hardware.

if anything 64 bit users are more at risk as they could be infected with 64bit malware as well as 32bit malware, 32bit users dont have this problem.

How much x64-specific malware have you seen?

Overall, 64-bit is safer for the same reason Macs and Linux are: number of users.

Probably not. Most of the APIs, unless you are in kernel mode, is same. So, most malicious applications could still work in Windows x64. IMO, the higer security is probably the handiwork of on-for-all-programs-by-default hardware No Execute, PatchGuard and more randomization for ASLR

Nothing to do with patchguard and the other x64 security features in your highly qualified opinion then... :rolleyes:

I didnt say that & I didnt say my opinion was highly qualified, but thanks.

How much x64-specific malware have you seen?

none. but if there was none at all then the report would be pointless.

Ever had a patchguard crash? I've never heard of anyone who has as a result of malware.

Most malware doesn't try and patch the kernel. Anything that tries to patch system dlls would fail though because they'd be 64 bit as apposed to x86 which is what it would most likely target.

Most malware doesn't try and patch the kernel. Anything that tries to patch system dlls would fail though because they'd be 64 bit as apposed to x86 which is what it would most likely target.

Exactly. PatchGuard isn't very relevant in this context. Not just that, but if some malware for whatever reason wanted to patch the kernel, they could just disable PG first. A piece of malware that just sent the machine into a continuous crash loop would after all not be very useful.

PG primarily stops legitimate software from doing things it shouldn't, and that is its main purpose.

See http://en.wikipedia.org/wiki/Security_and_...ecific_features. The first 2 apply to XP 64 as well. Alas, if only Microsoft had supported XP x64 really well when it came out in April 2005.

It's like this:

- Windows users running the 64bit versions are immune against every kernel mode malware that was designed for 32bit versions of Windows. Why ?

Simply because every kernel level malware that was designed for 32bit versions of Windows rely heavily on modifying the Service Descriptor Table. Modifying the Service Descriptor Table on x64 is no longer possible, not without circumventing the Patch Guard Technology. So, all that malware that was designed for x86 is obsolete on x64.

- Windows users running either 64bit or 32bit versions of Windows are absolutely NOT immune against malware that is designed for x64. Circumventing Patch Guard is very well documented now (the very first public paper on this subject was published on Uninformed by Skape who works for MS now and Skywing, back in 2005), and more malware is being developed for x64 systems, especially that more and more users/enterprises are moving to this architecture.

To sum it up, in a couple years, there will be more malware targeting x64 systems and so this equation will shift.

Overall, 64-bit is safer for the same reason Macs and Linux are: number of users.

If I'm going to spend an hour writing code to disable systems, would I rather spend

that hour and effect 1 million systems, or 20 million?

Look at the number of "dangerous" websites. You know what MOST of them have in common? Porn. They either have porn, or just advertise it to get you to the site. Why? Because there's more people searching for porn that anything else. It's all in the numbers of potential victims.

It doesn't matter if you wrote just for 32-bit, the 32-bit virus code CAN STILL run on a 64-bit system with WOW...in simple terms, you can run a 32-bit app/virus/etc. on 64-bit windows...it doesn't matter. Now, if it's a 64-bit ONLY virus, that's a different story...as for Linux/Mac, I have no experience to comment in that area.

So your argument is null and void for Windows 64-bit systems using AMD64 (not Itanium64 versions).

Nothing to do with patchguard and the other x64 security features in your highly qualified opinion then... :rolleyes:

Haha...eye roll is right.

The comments are almost Picard face-palm worthy.

x64 was designed to be more secure. Why the **** is anyone surprised that MS says it's safer.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
    • Or every other browser, because they all behave the same, at least the mainstream ones. Firefox does exactly the same: background updates, restart to install them. Haters gotta hate, I guess.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      85
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!