Recommended Posts

Hi Guys,

I had virginmedia 50mb service since few months now and I had nothing but problems with it. Slow speed is one of them, High power levels on the modem and god knows what else.

So far around ten technicians has looked at it and they just can't resolve the slow speed issue. on average I get around 30mb and low as it can get to is 12mb.

I am going back to 20mb as I fed up with it.

Any similar experiences with them

Link to comment
https://www.neowin.net/forum/topic/847894-virgin-media-50mb/
Share on other sites

Eek! An engineer's coming to install this at mine on 12th December.

I had 10mb and always got nearly 10mb, and I have 20mb now and always get nearly 20mb.. so I'm hoping I'll have good luck with the 50mb too!

What sort of speeds did you get before on your old plan, were they slow as well?

I have 50mb and I max it out most of the time no problem, I get the odd lul of 30mb but they are rare, normally I can download from a strong server such as nvidia's download server, or a good torrent, and get the full speed.

Similar situation here I had 20Mb and never dropped below max (around 2.5MB/sec) had 50mb installed and nothing but problems. The modem craps out all the time due to power levels, speeds are terrible, most of the time it is 1MB (10mb), half what I had on 20mb and even on usenet barely get over 3MB (30mb).

Its a joke and I cannot get out of it to go back to 20mb as they say I signed a new contract for 18mths, when I havent signed a damn thing, I just called them.

^ Have looked at it but no luck I guess their network is running over dose with lot of people on 50mb. They introduced 50mb but their network cards, UBRs and other equipment is not up to scratch. What really ****es me of more is their technicians who come round are ****ing stupid at times and can't wait to finish and go on to their next job. Their secondline says something else and the technicians say something else. At times it really amazes me how inefficent they are and how can a company like virginmedia can operate.

Similar situation here I had 20Mb and never dropped below max (around 2.5MB/sec) had 50mb installed and nothing but problems. The modem craps out all the time due to power levels, speeds are terrible, most of the time it is 1MB (10mb), half what I had on 20mb and even on usenet barely get over 3MB (30mb).

Its a joke and I cannot get out of it to go back to 20mb as they say I signed a new contract for 18mths, when I havent signed a damn thing, I just called them.

I could be wrong but I'm pretty sure you can get out of the contract if the service you receive is that awful and VM don't do enough to assist you.

Similar situation here I had 20Mb and never dropped below max (around 2.5MB/sec) had 50mb installed and nothing but problems. The modem craps out all the time due to power levels, speeds are terrible, most of the time it is 1MB (10mb), half what I had on 20mb and even on usenet barely get over 3MB (30mb).

Its a joke and I cannot get out of it to go back to 20mb as they say I signed a new contract for 18mths, when I havent signed a damn thing, I just called them.

Two words (at least as far as VM are concerned) - Verbal Agreement.

I had 50Mb installed last February - the engineer came out, installed everything, did a speed test (from a '"dedicated 50Mb server") and it topped out at....... 24Mb. A couple of days worth of tests, checking the CABS, checking the line, etc, etc, and they still couldn't get it above 24Mb. So, I complained, complained, and then complained some more, and had it taken out, and the 10Mb connection put in - worked (almost) perfectly, then about 4 - 5 months ago, upped it to 20Mb, and although I don't hit the full 20Mb (see speedtest results in siggy), it's fast enough for my needs.

^ fair point about your needs, but the speed drop on 50mb is A LOT COMPARE TO 20MB. and is something they need to look in to asap.

Oh absolutely - just telling ya my experiences :) - During the installation, did they do the speed check? That's how I realised that mine wasn't running anywhere near the speed it should have been - They'll try and fob you off about server loads, and what not, but just head over to Microsoft, NVIDIA, etc, and download 3 - 4 big files, and add up the total running speed.

I was lucky, because I complained like a true Brit, and got the installation switched over to a 10Mb line (then upped a few months ago to 20) - In fact, I'm sure there's something about a "Minimum speed" that 50MB is supposed to run at - I might be completely wrong about that, but I'm sure I've read it somewhere.

With regards the power levels - have they tried putting a filter onto the line? In some case that can help. Also, and I'm guessing you've already tried this - if you're connecting over wi-fi, try plugging directly into the modem, to see if that makes any difference.

Been off again for the last few hours :( Its a daily occurrence now, around 7pm all goes screwy then the connection (tick) light just keeps cycling. After spending an hour on the phone eventually spoke to someone, they said there was no problems as the engineers over the last two days had said they had fixed the signal levels and checked the cab and moved me onto a higher connection. So the only other thing to do was replace the modem, which will take at least 5 working days, then I have to call them (They said I would get a replacement in the post, swap it over and call them to connect it)

We 've had the 50Mb since the start of September and it's god-awful.

Highest speed I've seen in a test is about 32Mb, but the problem is usually ping. Our ping time just goes crazy for no reason - upwards of 4000ms at times.

It's got better recently, a bit, but we still get an hour or two every few days were we just can't do anything.

Like everyone else here, we've had engineers out and they've done nothing.

This is why I've been so apprehensive to join VM. I can only get 3.5Mb on LLU, but at least it's always 3.5Mb and truly uncapped. I don't want to switch and be stuck with bad service for 12 months (even though it may be faster than 3.5Mb most of the time).

Edited by Bhav

Get 20Mb then, it doesnt have a monthly cap but it does have traffic shaping. If you download more than 3.5Gb between 9 and 3 and 3 and 9 your connection gets capped down to 5Mb which is still faster than what you get now even capped, it then resets at either 9pm or after 4-5 hours of going over the limit whichevers soonest. 50Mb is brand new, required all brand new equiptment as it runs on DOCSIS 3.0 not DOCSIS 1.1/2.0 like 20Mb and under.

Yeah I did exactly the same calculations and almost went for it...but as I'm sure you're aware VM is notorious for crappy customer service, and I really don't have the time/patience to keep calling them etc if something goes wrong.

Anyway it's a non-issue for 9 months, as that's when my current contract runs out lol.

Yeah I did exactly the same calculations and almost went for it...but as I'm sure you're aware VM is notorious for crappy customer service, and I really don't have the time/patience to keep calling them etc if something goes wrong.

Anyway it's a non-issue for 9 months, as that's when my current contract runs out lol.

If I ever have a query with VM, I tend to ring twice.. and if both members of staff say the same thing, it's more likely to be right.

I find half of them will say anything just to get you off the phone. One staff member told me I qualified for the ?18/month 50mb cost which is only for new customers taking out a phone line. Next person told me I could only get it for ?38 as I'm not a new customer and already have a phone line. Talk about different answers!

I did have the same problem! I was really fed up wtih it and change my broadband provider.I always see that virgin says they give the full capacity band to its clients but it never happens.Ok maybe you could say there are conditions where the band could break up.But not all the time going to 20mb when you have a contract for 50mb! :(

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft now allows you to tweak Visual Studio to new extremes by Usama Jawad Visual Studio 2026 recently netted a powerful feature that finally allows developers to review Git Pull Requests (PRs) directly in the integrated development environment (IDE), without needing to switch to the browser. However, that's not all that Microsoft introduced in the latest version, as it also offered a useful way to customize the IDE to their heart's content. Although Visual Studio 2026 already provides lots of stock themes based on Fluent Design principles, Microsoft understands that people still want to customize them further according to their preferences. The IDE now offers a new configuration page for themes under Tools > Options > Environment > Visual Experience > Theme colors. This allows you to set hex color codes for accent colors, hover states, and more, and apply them without requiring a restart. The Redmond tech giant further says that: Microsoft is also offering granular color tokens that allow you to customize various UX elements like the tab header without impacting the rest of the shell chrome. Your themes are also stored in JSON format in %LOCALAPPDATA%\Microsoft\VisualStudio\18.0_xxxxxxxx\ColorThemes, which basically enables you to share it with others or override existing themes. This is a major improvement in terms of the user experience powering these customization capabilities. This is because extensions were required to replace the theme, and it was not very easy to make minor adjustments. This theme configuration UX solves this problem and is available in Visual Studio 2026 version 18.7, available here.
    • AnyDesk 9.7.6 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.6 changelog: Fixed Bugs Added validation feedback for passwords shorter than five characters Fixed an issue in AnyDesk One Meeting where the account name was used instead of the entered username after logging out Fixed crashes related to message editing and context menu interactions Fixed issues affecting message scrolling, text formatting, typing indicators, quoted messages, and community privacy settings Prevented users from editing automated system messages Corrected download status reporting, temporary file naming, and menu overlap issues affecting the Download History and Reactions pop-ups Other Changes Added chat list grouping settings Added keyboard navigation support (Page Up, Page Down, Home, and End) for the message feed Removed Chat language options Updated translations Download: AnyDesk 9.7.6 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      +Edouard
      202
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      76
  • Tell a friend

    Love Neowin? Tell a friend!