Windows 7 support by the end of the year?


Recommended Posts

I have been waiting for this before i wanted to setup mine to work on it. I have a Early 2009 MacBook (Aluminum Unibody) however I was waiting for the bootcamp support before i Attempted it.

Everything works fine in Bootcamp for me under Windows 7.

******! You're using old outdate Windows Vista drivers. There are no officially supported Windows 7 bootcamp drivers yet.

On new 13 inch Macbook pro, sleep is sometimes messed up when the lid is closed, the audio drivers don't function correctly (there's more sound output from the left audio channel than the right, no stereo and the sound is very poor quality), the SPDIF output light is also also always on, and additionally the trackpad is also often horribly over sensitive.

All is not quite as sweet as you assume it to be. These are among a few of a great many very well documented faults.

Edited by bmaher
Swear filter evasion
******! You're using old outdate Windows Vista drivers. There are no officially supported Windows 7 bootcamp drivers yet.

On new 13 inch Macbook pro, sleep is sometimes messed up when the lid is closed, the audio drivers don't function correctly (there's more sound output from the left audio channel than the right, no stereo and the sound is very poor quality), the SPDIF output light is also also always on, and additionally the trackpad is also often horribly over sensitive.

All is not quite as sweet as you assume it to be. These are among a few of a great many very well documented faults.

10.6 has Windows 7 drivers. P.S you can use Vista drivers for 7. Quit spreading the FUD.

Edited by bmaher
fixed quote
Apple engineers are on holiday at the moment (probably) so it'll have to wait til the new year.

Seriously, can they say that? I mean can they say something as definite as that and then just not bother? Is that how Apple works?

Anyway I am using 10.6x. My MBP came with it installed - and the lasted boot camp drivers. No official Windows 7 drivers there. I have no clue why you're talking about 'fud'. These are real faults, why would anyone even go to the trouble of making them up?

Edited by jebus197
******! You're using old outdate Windows Vista drivers. There are no officially supported Windows 7 bootcamp drivers yet.

On new 13 inch Macbook pro, sleep is sometimes messed up when the lid is closed, the audio drivers don't function correctly (there's more sound output from the left audio channel than the right, no stereo and the sound is very poor quality), the SPDIF output light is also also always on, and additionally the trackpad is also often horribly over sensitive.

All is not quite as sweet as you assume it to be. These are among a few of a great many very well documented faults.

Whether they be Windows 7 drivers or Windows Vista drivers - it works - flawlessly. 99% of Vista drivers work fine with Windows 7 anyway.

Everything works, I have no errors, and the only really important driver (performance wise), the graphics driver, is automatically updated via Windows Update anyway.

Also...

Thread Cleaned.

Please keep it civilised and please don't evade the swear filter.

Whether they be Windows 7 drivers or Windows Vista drivers - it works - flawlessly. 99% of Vista drivers work fine with Windows 7 anyway.

Everything works, I have no errors, and the only really important driver (performance wise), the graphics driver, is automatically updated via Windows Update anyway.

I am very glad everything works for you. But the point I was trying to make is that this isn't the case for everyone - and in this case they clearly don't work completely effectively for me.

Also Windows Vista drivers are still Windows Vista drivers. Just because they work (although again, they don't work all that well for me) doesn't mean by any measure that they have been optimised for Windows 7. There are still likely to be several improvements to be gained from using fully dedicated drivers.

Whether they be Windows 7 drivers or Windows Vista drivers - it works - flawlessly. 99% of Vista drivers work fine with Windows 7 anyway.

Everything works, I have no errors, and the only really important driver (performance wise), the graphics driver, is automatically updated via Windows Update anyway.

Also...

Thread Cleaned.

Please keep it civilised and please don't evade the swear filter.

I didn't evade it. I edited it myself. Lol. Since when is **** swearing anyway?

Anyway sorry for being frustrated, I just don't get it when people idiotically deny any possibility of a fault with a sytem purely on the basis of what seems like some kind of obsessive brand loyalty. What makes it especially dumb and frustrating is that these faults are real and are not made up, or 'fud' at all.

Edited by jebus197

The Vista boot camp drivers may "work" with Windows 7, but there's obviously room for improvement, as my 2 year old lower-spec'd HP boots and runs 7 faster than my brand new MBP. There's also the hyper-sensitive touchpad driver. Many times I'll accidently click something when I'm meaning to scroll. And they need to update the drivers to allow Windows 7's power management to do its job better - as it is it can't even control screen brightness...

Everything seems to work fine here. Windows 7 Ultimate 32Bit. I got the latest drivers from the NVIDIA site. However I had a nightmare installing it because when it rebooted it didnt turn the screen back on. It just sat there black screen. I eventually got it sorted just guessed when to press next on the windows install lol. It rebooted fine though.

As I said, I think you guys are possibly missing the point slighly. The point of the thread, and my question isn't that 'it works for you', it's that there are plenty of cases, especially with some of the newer MBP's where the old Windows Vista drivers don't work all that well at all.

Also the point is that they are mostly all still Windows Vista drivers, hence not optimised for the new Windows 7 kernel etc. Thus at some point or other, you will still be missing out on performance.

Moreover the starting premise of the thread was simply that Apple seemed to be taking their own dear sweet time in holding themselves to a promise they made shortly after Windows 7 was officially released.

There's still clearly some time for them to do this, but it does seem odd that they are cutting it so fine.

Edited by jebus197
Seriously, can they say that? I mean can they say something as definite as that and then just not bother? Is that how Apple works?

Anyway I am using 10.6x. My MBP came with it installed - and the lasted boot camp drivers. No official Windows 7 drivers there. I have no clue why you're talking about 'fud'. These are real faults, why would anyone even go to the trouble of making them up?

Well maybe they planed to release before Christmas but some major bug appeared they ran out of time and rather than release a pile of crap come back in the new year.

The Boot Camp drivers work in Windows 7. They work just fine, in fact, considering that it's not the OS the hardware was designed for. However, the drivers are designed for Vista, and my understanding is that 7 offers some new things, like better power management, multi touch support (via the trackpad), etc.

I'm hoping that the reason Apple is taking their time is because they're taking advantage of all Windows 7 has to offer. They showed some promise with the improved drivers included with Snow Leopard.

The Boot Camp drivers work in Windows 7. They work just fine...

But the point is they don't work well in all cases! Look up the issues I have described on any notable Apple forum and you will find more than plenty examples of these.

However you are correct that Windows Vista drivers have also not been optimised for Windows 7, so overall performance is unlikely to be on the same level as a sytem running fully dedicated drivers.

Vista drivers works fine on my MacBook Pro 13"... but the tap click is too sensitve, the optical light is always on and Im using a modified sound driver to get max. volume. Then the line-in doesn't work... I would be glad if they improved the trackpad driver alot, and released it soon...

I installed Windows 7 x64 without Bootcamp, erasing everything the disk had, natively alone, at an Aluminium iMac.

I also installed drivers natively from each hardware manufacturer missing ( one :p )

All that was missing, a stupid Bluetooh stack Apple uses and a Special Key, in iMac keyboard for eject.

Everything, even iSight Camera was instantly recognised by Windows 7 + Windows Update.

I just installed Bluetooth Stack from Vista, and the stupid button.

I updated even Drivers that Windows 7 recognised such as Realtek Audio, Marvel Yukon Gigabit and Broadcom Wireless.

PC..errrrm the Mac now runs superb/splendid Windows 7 x64 native, alone.

No need to wait for Apple SuperDuper Engineers...

P.S. to install I had to alter the original win7 iso, so Apple's stupid EFI co-operates with UEFI 2.x that Windows 7 x64 support, or else both Windows/EFI boot were halted.

Lol, I give up! It's completely irrelevant that "it works for you." Clearly if you read the links I supplied above you will find that this is not the case for everyone.

Many of the drivers for the newer Macbook Pros cannot be downloaded directly from the manufacturers site. This includes trackpad and audio drivers (and chipset drivers too - which will almost certainly have a direct impact on performance).

I also have to run hacked audio drivers to get 'full' volume, although the sound quality is still nothing short of terrible and there is higher volume coming from the left speaker than the right speaker.

Again I genuinely can't see the point of posting comments saying 'it works for me.' If it does, then great, what this means is that you're not affected. It probably also means you're running a slightly older version of a Macbook.

Moreover working drivers and 'optimised' drivers are not the same thing. Working Vista drivers may appear to work, but they are not optimised for Windows 7, hence performance overall is likely to suffer.

http://support.apple.com/kb/HT3920

Note: The following models will not be supported for use with Windows 7 using Boot Camp.

iMac (17-inch, Early 2006)

iMac (17-inch, Late 2006)

iMac (20-inch, Early 2006)

iMac (20-inch, Late 2006)

MacBook Pro (15-inch, Early 2006)

MacBook Pro (17-inch, Late 2006)

MacBook Pro (15-inch, Late 2006)

MacBook Pro (17-inch, Early 2006)

Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)

Does anyone know why this is the case that they are not supported? is it a technical reason or a matter of policy because these products are End of Life? And does anyone know if any technical restriction will be put in place to prevent attempted installation on this hardware in an unsupported manner?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!