Installing XP via Network Boot?


Recommended Posts

I've got an old Dell Latitude L400 (lol) that I use frequently while I'm in bed and don't feel like getting on the desktop. Everything was working fine, then yesterday windows decided it would freeze during boot. Got into safemode and did a scan with malwarebytes and found nothing. Scheduled a boot disk check and restarted, but windows froze again. Tried to get back into safemode, but now that's corrupt too and it won't boot.

The bios it has does not support USB boot. The newer version does, but you can't update the bios without a bunch of floppies. Well, the L400 doesn't have a floppy drive.

I noticed a network boot, though. Can I access my Winxp CD through my desktop's CD drive? or ISO? I guess I'd have to set up a server or something? Not really sure how that would work.

I'm not spending money on a 2.5 IDE to normal IDE so I can hook up the HDD to desktop. That's probably more expensive than what the laptop's worth, lol.

I don't really have many options, do I?

Hmm...

Summary:

  • Dumb Laptop
  • Does not boot from USB
  • Has no CD Drive
  • Has no Floppy Drive
  • Can't Update Bios without floppy drive
  • Too cheap to buy parts needed to fix it

Link to comment
https://www.neowin.net/forum/topic/868520-installing-xp-via-network-boot/
Share on other sites

New IPB3 won't let me edit my post...

Anyway, somehow I kept on trying "last known good configuration" and I'm finally IN! I'm in XP right now. Not sure what to do. Reinstall XP through XP? Install Ubuntu?

Afraid to turn it off now, lol.

Edited by Kondrath

Well a 2.5 ide to 3.5 ide cable is only a couple of bucks and is handy item to have in your tool belt anyway.

http://www.amazon.com/gp/product/B001RW8002/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00006B8C2&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1G9XY6RD2C4E5YY5ECKH

$5 - plus shipping, sure you can find it cheaper as well.

41IpvsB2NlL._SL500_AA280_.jpg

As to setting being able to install from a network boot, sure can be done -- but going to involve some setup. Be it a MS RIS server, or using something like the ultimate deployment appliance (virtual machine)

http://www.ultimatedeployment.org/

I haved used the UDA quite a bit to be honest, it can be very handy to have running on a laptop when you need to install an OS to lots of machines at a location ;) But like I said there is some initial setup that can be a bit involved.

Here is info on how you would do it the MS way.

http://technet.microsoft.com/en-us/library/cc786442%28WS.10%29.aspx

Remote Installation Services

Wow, sounds like that IDE converter will save me a bunch of trouble... Thanks for the links.

The laptop can boot into windows now, but now it has trouble shutting down. Just hangs at the shutting down screen. Ran a check disk, nothing wrong. I tried clean installing from within the OS using my XP CD and the laptop's serial, but apparently it's invalid. I was under the impression that it was a genuine copy of XP, but I guess it isn't... So now I can not clean install. (Laptop was given to me by a friend who could not get it to turn on. Turns out the ac adaoter was just not put together all the way :rofl: )

Would it be possible to hook up a normal computer's floppy to the laptop, if only temporary? Not sure how the connections are inside of laptop - I've never had to open one up really. But if I could update the BIOS all of my problems would be solved. I could boot from USB and install a new OS...

I doubt you could install a standard floppy to a laptop, everyone I have seen had a proprietary connection. But you should be able to get a simple PXE (network boot) going of say a dos disk image with the bios update on it to allow you to flash the bios.

There are lots of guides out there on how to setup PXE boot system - pretty easy to do on any linux system. There might even be some virtual appliances out there you could use that have everything setup for you.. The UDA for example is virtual machine you run -- just have to config it, you should be able to boot a floppy image this way to get your bios updated.

  On 25/01/2010 at 19:42, BudMan said:

I doubt you could install a standard floppy to a laptop, everyone I have seen had a proprietary connection. But you should be able to get a simple PXE (network boot) going of say a dos disk image with the bios update on it to allow you to flash the bios.

There are lots of guides out there on how to setup PXE boot system - pretty easy to do on any linux system. There might even be some virtual appliances out there you could use that have everything setup for you.. The UDA for example is virtual machine you run -- just have to config it, you should be able to boot a floppy image this way to get your bios updated.

Interesting. So UDA is like a VM of linux that I can use to make a PXE boot system... And mount a floppy image so my laptop can see it via network boot. Sounds easy, but it's probably a little complicated. I'm going to have to research this a lot. Although I've built my own computers and am the local "repair" guy, I have no idea what I am doing when it comes to this type of thing....

Thanks for your information, Budman.

Yup UDA is virtual machine, you run it on a vmware server (free).. I have had better luck with the 1.4 version vs the 2.0 beta.. Once its running you config it using web interface -- so its not all that difficult to get running.. But like I said it does take some setup and is more involved than just clicking go ;) So yeah going to have to do a bit of research if you want to use that.

But I do believe there are some easier methods.. Im fairly sure you could use a simple tool like tftpd32 which has a dhcp server and tftp server features (both needed for pxe booting)

Here is a simple writeup I found using tftpd32 to boot floppy images -- you could create one that has your bios update on it for example.

http://home.allegiance.tv/~joem298/

This should only take a few minutes to setup actually -- when I get home I might fire it up just to know how long it should take.. If you want I could setup a image for you with your bios update for the L400 on it, etc. I could prob just zip it up for you to run, etc. I will take a look when I get a chance.

  On 25/01/2010 at 21:43, BudMan said:

Yup UDA is virtual machine, you run it on a vmware server (free).. I have had better luck with the 1.4 version vs the 2.0 beta.. Once its running you config it using web interface -- so its not all that difficult to get running.. But like I said it does take some setup and is more involved than just clicking go ;) So yeah going to have to do a bit of research if you want to use that.

But I do believe there are some easier methods.. Im fairly sure you could use a simple tool like tftpd32 which has a dhcp server and tftp server features (both needed for pxe booting)

Here is a simple writeup I found using tftpd32 to boot floppy images -- you could create one that has your bios update on it for example.

http://home.allegiance.tv/~joem298/

This should only take a few minutes to setup actually -- when I get home I might fire it up just to know how long it should take.. If you want I could setup a image for you with your bios update for the L400 on it, etc. I could prob just zip it up for you to run, etc. I will take a look when I get a chance.

That would be a great, great help.

I tried following the directions myself and got stuck at

"#5

The last file that you will need for your PXE server is a boot disk image. If you have a bootable floppy disk that you want to use for booting your M200, you can skip this step. Otherwise, find a blank floppy disk and insert it into your PXE server. Unzip the contents of 'BFD full package v1.0.7.zip' into a temporary directory. Open a command prompt and browse to that temporary folder. Run the command 'bfd msnet' in order to create the bootable floppy. "

It seems as if my host computer still needs a floppy disk in order to complete this step.

Unless I find a floppy emulator...maybe...?

EDIT: Man, this is ridiculous. I can't find a x64 compatible virtual floppy drive anywhere.....

Edited by Kondrath

here you go dude -- I did a test run.. I could not get the latest version of tftp32 to work (will look into that later I think), backed off to version 3.03 or something.

Anyway.. I even made a floppy image for you ;)

Everything you need is in the Zip file.. Just unzip it to say c:\tftpd, run the tftp32 exe and make sure you setup the dchp server stuff. here is screen shot of mine. You might need to change the network to match up to your machines IP etc.

post-14624-12644615811108_thumb.jpg

Make sure you turn off any other dhcp servers on your network (your router for example when doing this) Then boot your machine with pxe.. You will end up at a A:\ prompt -- and then just run the bios boot file for the L400A9.exe I put into the image.

post-14624-12644616684629_thumb.jpg

See here is the virtual machine booting from the pxe server.

post-14624-12644618229376_thumb.jpg

You will then see it load the image file and boot caldera dos, etc..

Now If this F's up your machine -- thats on you dude.. Just trying to help.. Don't use my bios update file if your worried, etc. I grabbed the one for the L400 so if that is what your machine is - it should work.

tftpd.zipFetching info...

  • Like 2
  On 25/01/2010 at 22:15, Kondrath said:

..

EDIT: Man, this is ridiculous. I can't find a x64 compatible virtual floppy drive anywhere.....

x64? as in 64bit? i dont think the laptop supports that. look for 32bit or x86.

btw if this is a dell, cant you install the bios from windows?

if not another possibility is creating a boot cd with the bios files.

do you have access to a cdrom somewhere temporarily? you could burn a bootable dos disk from your desktop and then add in the bios file.

http://www.bay-wolf.com/bootcd-bios.htm

Im not sure why he think he needs some 64bit virtual floppy drive? Unless he was looking to create the floppy image.. I just grabbed freedos.exe and extract the files using winimage, then added his bios file to create the imz file.

I agree with you more modern stuff allow for updating the bios by running a file inside windows - but for that old L400 the only bios files I saw were one to create a floppy image, and the exe you put on your own floppy.

Sorry for that last PM, the boards were messing up and I couldn't update you on the progress. I figured out how to do everything, and the bios is successfully flashed!

Thank you very much for all of your help!

Though, I don't see a boot from USB in the BIOS... :rofl: ... Hopefully I'll figure the rest out!

Edit: Nevermind, it added support for an F12 boot menu.

Thanks again!

Edit again: Still not booting into the USB. I really hope it's just my USB stick or something. But it seems that the USB is not getting any power until windows starts. Sigh.

Edited by Kondrath

If you having problems booting from a usb.. You can do the same pxe thing -- just need a boot image that has network support.. Boot a WinPE disk, Bart disk for example that has network drivers and then you can run the setup over the network.

I know what laptop you have -- let me see if I can see what nic it has to be able to have the driver for network booting, etc.

edit: hey ran across this site -- they even mention your laptop L400, and its using the tftpd setup, etc.. so with some very minor modifications to what you already have running you should be able to get xp installed

http://blog.webpirates.co.uk/?p=56=1

Windows XP PXE installation

Edited by BudMan
  On 26/01/2010 at 02:31, BudMan said:

If you having problems booting from a usb.. You can do the same pxe thing -- just need a boot image that has network support.. Boot a WinPE disk, Bart disk for example that has network drivers and then you can run the setup over the network.

I know what laptop you have -- let me see if I can see what nic it has to be able to have the driver for network booting, etc.

edit: hey ran across this site -- they even mention your laptop L400, and its using the tftpd setup, etc.. so with some very minor modifications to what you already have running you should be able to get xp installed

http://blog.webpirates.co.uk/?p=56=1

Windows XP PXE installation

Awesome. Looks like I'm saved! I was just about to try something crazy (I think I might still try it), but I was going to use my PSP and see if it would act as a USB device since it is powered. And if that failed, I was gonna try some SD card readers. :laugh:

After the PSP, I'll give that guide a go and report back.

EDIT: or my Nikon D40 :D

It has been done.

dsc1317i.jpg

I don't think I've ever been so happy to see that screen.

The tutorial's steps (specifically the structure of folders and dos commands) did not work for me, so I had to figure it out myself and make a functioning directory. It was worth it, though!

Worst XP install EVER. :laugh:

I would have to run through the tut myself to see know -- but looks like you got what you need done done.. And learned quite a bit in the process to boot! Which is always a plus.. Now you know and have a method of booting pxe on your network.. there are lots and lots of things you can do with that!! Its a nice tool to have in your tool belt.

You might want to still look into UDA if you want a slick way to install multiple OSes -- pick from a menu, etc.

  • Like 1
  • 10 months later...
  On 19/12/2010 at 17:07, delukard said:

HI! thanks for all this info and the files, But i get stuck at A: in dos, what file should i run? i dont see the bios file

thanks!!

Sorry i couldn't edit post.

I runs the name of the dell bios file and it updated the bios , TY very much for this image!.

all i need to see if i can boot fom usb now.

Sorry for posting again, after flashing bios to A9, it doesn't boot from usb (so sad) so i was wondering, how hard would it be to install XP from PXE? hope someone helps.

I was reading a tutorial, but for some reason, i cant seem to find Bart Network Boot Disk. i finde the files, but they are incomplete.

This whole thread is about doing install from PXE!!

And bios image was run from booting PXE ;)

Who every mentioned Barts network boot?? Grab the UDA I mentioned

http://www.ultimatedeployment.org/

  On 20/12/2010 at 01:05, BudMan said:

This whole thread is about doing install from PXE!!

And bios image was run from booting PXE ;)

Who every mentioned Barts network boot?? Grab the UDA I mentioned

http://www.ultimatedeployment.org/

yes budman i grabbed today the files you posted and then i flashed the bios by using PXE. Now i want to install xp trough PXE and was following a tutorial and the only file i can't get is the Barts network boot.

I'll download the file you mentioned (ultimate deployment) and try using that . I'm not that amateur, but i have never used that tool. i'll google some tutorials, hoping it let me install XP to the l400

BTW i read about a guy that installed xp on another laptop, and then removed the intel ide drivers (safe mode )and put the HDD again in the l400 and booted fine.

I did that but i got a cannot read disk error.

you guys seem very knowledgeable hope someone helps me.

I already installed lubuntu on the laptop. but the thing is that i got this laptop for my 9 yr daughter, and i don't think i can teach her to use lubuntu.

I was thinking of installing Windows ME on anotehr laptop and just move the drive.

All this trouble is because i want to teach her to transfer music to her mp3 and to use encarta (her mom doesn't have internet) and for this i need Windows.

I was following this guide but some of the files i cant get them pxelinux.0 memdisk menu.c32 bartdisk.IMA

I can follow instructions very well, and i feel confident that i i had teh files i can install xp to the laptop.

I'll apreciate it if someone has this files or point me to a valid link.

Thansk for your help!!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux Mint is finally getting native fingerprint login support by David Uzondu In the latest monthly news roundup from the Linux Mint team, the developers announced a feature that users have wanted for a long, long time. The famously user-friendly distribution is finally getting proper, integrated support for fingerprint login. For a distro that has built its reputation on providing a comfortable, "it just works" experience for people new to Linux, the absence of this convenient security feature has been a noticeable gap, especially on modern laptops. The new feature will arrive in Linux Mint 22.2, powered by Fingwit, a brand new XApp built by the Mint developers. It handles detecting your fingerprint reader and recording your prints. Once configured, you can use your fingerprint for the login screen, the screensaver, authenticating sudo commands, and any other administrative actions that pop up a password dialog (pkexec). What makes this particularly interesting is how it deals with situations where a fingerprint just will not work. Fingwit uses fprintd for the backend work, but the Mint devs say its custom authentication module is clever enough to detect tricky cases. For instance, if your home directory is encrypted, you absolutely need your password to decrypt it at login. Just using a fingerprint would lead to a crashed session. Fingwit sees this coming and dynamically prompts for your password instead. The Mint team says Fingwit will be able to run "in any desktop environment and on any Linux distribution." A significant driver for this development has been the team's ongoing work with Framework. Testing the company's hardware has pushed the Mint team to better support the features packed into modern laptops. This partnership is also the reason Mint 22.1 got power profiles and why Mint 22.2 will ship with a newer HWE (hardware enablement) kernel. The team also announced a slew of other changes for the upcoming release. As part of this work, core applications like gnome-calendar, simple-scan (the document scanner), and baobab (the disk usage analyzer) will be upgraded to their newer libAdwaita versions. To solve the long-standing frustration of libAdwaita apps ignoring system themes, the developers have patched the library. Taking it a step further, they have forked it entirely into a new project called libAdapta. On a final, critical note, the team also had a serious warning for users of older versions. The Linux Mint 20.x series, which includes versions 20, 20.1, 20.2, and 20.3, officially reached its End of Life in April 2024. Your system will continue to function, but it will no longer receive any security updates from the official repositories, leaving it vulnerable. The team laid out two options. The recommended path is a fresh installation of a newer release (22.1), which provides support until 2029 and is the cleanest way forward. Alternatively, you can attempt a long and complicated in-place upgrade, which is a multi-step process from 20.x to 21.3.
    • hey all. i recently upgraded my pc: i rma my old motherboard and got a B550 board so i had to get a new cpu.   this is what i have right now. Ryzen 7 5800x( seperate cheap cooler) B550M PRO-VDH MSI 2x16gb DDR4 3600mhz 256GB SSD nvme 1.81TB Games drive 465GB backup Drive 1.36TB Games Drive 2x 2TB MyBook USB Drives RTX 3050 8gb OC Aura case with glass 1000 watt MSI Mag PSU 1650x1050 22" Dell monitor( got it for free off of facebook) everything is canadian prices i might get a 4k monitor next year SO i was planning to get a new gpu then some  items were on sale on amazon canada. Canadian Prices total budget is 864.05   i can either get upgrade too: i would return the cpu, ram(have to anyway) and gpu 5900x( without cooler, will use my cooler that i have here from my old 2700x)- 314.10 ddr4 3600mhz( i have to return them and get another one because there is something wrong with the ram- getting blue screens)-68.33 ASUS Dual Radeon™ RX 7600 EVO OC Edition 8GB GDDR6 -370.79 total 845.26 with 5.00 off amazon coupon   or keep my 5800x with the fan return my gpu and get a better gpu. the rtx 3050 8gb is my current one i have until june 16 to return it.   these are the gpus that i can afford with keeping the cpu with fan but getting new ram. MSI Gaming RTX 5060 8G Shadow 2X OC Graphics Card - 439.99 MSI Gaming GeForce RTX 3060 12GB 15 Gbps GDRR6 - 427.69 ZOTAC Gaming GeForce RTX 4060 8GB Solo DLSS 3 8GB GDDR6 -- 446.20 ASUS Dual Radeon™ RX 7600 EVO OC Edition 8GB GDDR6 - 370.39 Sapphire 11310-01-20G Pulse AMD Radeon RX 6600 Gaming Graphics Card with 8GB GDDR6, AMD RDNA 2- 382.18 Sparkle Intel Arc B570 Guardian OC Graphics Card, 10GB GDDR6- 437.39
    • Wi-Fi 6E in 2025? Why? Everything should have Wi-Fi 7 by now, IMO.
    • OK Microsoft, can you please fire the entire Windows team and hire those 20 Xbox developers instead to work on Windows? We'd all pretty much want to have a light and bloat free Windows!
    • Call of Duty: Black Ops 7 is out this year, landing with a "mind-bending" co-op campaign by Pulasthi Ariyasinghe A surprise Call of Duty announcement landed during the Xbox Game Showcase event today, with Treyarch and Raven Software unveiling Call of Duty: Black Ops 7 as the next entry in the massively popular FPS franchise. While many were expecting the 2025 entry to be a Modern Warfare game, this will be the first time in the history of the series that two Black Ops games will be releasing back to back. Watch the teaser trailer above. Black Ops 7 will be set 40 years after the events of Black Ops 6, taking players to 2035 for a more futuristic experience. "Wielding cutting-edge technology, David Mason and his team must fight back against a manipulative enemy who weaponizes fear above all else," says the company. "The Black Ops universe is amazing. The creativity and imagination that goes into the storytelling, the rich character depth, and the incredible moment-to-moment gameplay across all modes is really exceptional," says Matt Cox, General Manager of Call of Duty. "As a team, our vision from the start was to create a back-to-back series experience for our players that embraced the uniqueness of the Black Ops sub-franchise." In another twist, the complete campaign will be playable in co-op in addition to offering solo play like usual. The story will follow a world that's on the brink of chaos, according to Treyarch, where violent conflicts and psychological warfare are rampant. Of course, a complete multiplayer portion with new maps and weapons, as well as another dose of round-based Zombies in the Dark Aether will be included in the package too. The complete reveal for Call of Duty: Black Ops 7 will be releasing later this year before the full launch The title is coming to PC, Xbox Series X|S, Xbox One, PlayStation 5, and PlayStation 4. Game Pass subscribers are gaining access on day one too.
  • Recent Achievements

    • Dedicated
      Epaminombas earned a badge
      Dedicated
    • Veteran
      Yonah went up a rank
      Veteran
    • First Post
      viraltui earned a badge
      First Post
    • Reacting Well
      viraltui earned a badge
      Reacting Well
    • Week One Done
      LunaFerret earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      +FloatingFatMan
      265
    3. 3
      ATLien_0
      235
    4. 4
      snowy owl
      224
    5. 5
      Edouard
      174
  • Tell a friend

    Love Neowin? Tell a friend!