Installing XP via Network Boot?


Recommended Posts

I've got an old Dell Latitude L400 (lol) that I use frequently while I'm in bed and don't feel like getting on the desktop. Everything was working fine, then yesterday windows decided it would freeze during boot. Got into safemode and did a scan with malwarebytes and found nothing. Scheduled a boot disk check and restarted, but windows froze again. Tried to get back into safemode, but now that's corrupt too and it won't boot.

The bios it has does not support USB boot. The newer version does, but you can't update the bios without a bunch of floppies. Well, the L400 doesn't have a floppy drive.

I noticed a network boot, though. Can I access my Winxp CD through my desktop's CD drive? or ISO? I guess I'd have to set up a server or something? Not really sure how that would work.

I'm not spending money on a 2.5 IDE to normal IDE so I can hook up the HDD to desktop. That's probably more expensive than what the laptop's worth, lol.

I don't really have many options, do I?

Hmm...

Summary:

  • Dumb Laptop
  • Does not boot from USB
  • Has no CD Drive
  • Has no Floppy Drive
  • Can't Update Bios without floppy drive
  • Too cheap to buy parts needed to fix it

Link to comment
https://www.neowin.net/forum/topic/868520-installing-xp-via-network-boot/
Share on other sites

New IPB3 won't let me edit my post...

Anyway, somehow I kept on trying "last known good configuration" and I'm finally IN! I'm in XP right now. Not sure what to do. Reinstall XP through XP? Install Ubuntu?

Afraid to turn it off now, lol.

Edited by Kondrath

Well a 2.5 ide to 3.5 ide cable is only a couple of bucks and is handy item to have in your tool belt anyway.

http://www.amazon.com/gp/product/B001RW8002/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00006B8C2&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1G9XY6RD2C4E5YY5ECKH

$5 - plus shipping, sure you can find it cheaper as well.

41IpvsB2NlL._SL500_AA280_.jpg

As to setting being able to install from a network boot, sure can be done -- but going to involve some setup. Be it a MS RIS server, or using something like the ultimate deployment appliance (virtual machine)

http://www.ultimatedeployment.org/

I haved used the UDA quite a bit to be honest, it can be very handy to have running on a laptop when you need to install an OS to lots of machines at a location ;) But like I said there is some initial setup that can be a bit involved.

Here is info on how you would do it the MS way.

http://technet.microsoft.com/en-us/library/cc786442%28WS.10%29.aspx

Remote Installation Services

Wow, sounds like that IDE converter will save me a bunch of trouble... Thanks for the links.

The laptop can boot into windows now, but now it has trouble shutting down. Just hangs at the shutting down screen. Ran a check disk, nothing wrong. I tried clean installing from within the OS using my XP CD and the laptop's serial, but apparently it's invalid. I was under the impression that it was a genuine copy of XP, but I guess it isn't... So now I can not clean install. (Laptop was given to me by a friend who could not get it to turn on. Turns out the ac adaoter was just not put together all the way :rofl: )

Would it be possible to hook up a normal computer's floppy to the laptop, if only temporary? Not sure how the connections are inside of laptop - I've never had to open one up really. But if I could update the BIOS all of my problems would be solved. I could boot from USB and install a new OS...

I doubt you could install a standard floppy to a laptop, everyone I have seen had a proprietary connection. But you should be able to get a simple PXE (network boot) going of say a dos disk image with the bios update on it to allow you to flash the bios.

There are lots of guides out there on how to setup PXE boot system - pretty easy to do on any linux system. There might even be some virtual appliances out there you could use that have everything setup for you.. The UDA for example is virtual machine you run -- just have to config it, you should be able to boot a floppy image this way to get your bios updated.

  On 25/01/2010 at 19:42, BudMan said:

I doubt you could install a standard floppy to a laptop, everyone I have seen had a proprietary connection. But you should be able to get a simple PXE (network boot) going of say a dos disk image with the bios update on it to allow you to flash the bios.

There are lots of guides out there on how to setup PXE boot system - pretty easy to do on any linux system. There might even be some virtual appliances out there you could use that have everything setup for you.. The UDA for example is virtual machine you run -- just have to config it, you should be able to boot a floppy image this way to get your bios updated.

Interesting. So UDA is like a VM of linux that I can use to make a PXE boot system... And mount a floppy image so my laptop can see it via network boot. Sounds easy, but it's probably a little complicated. I'm going to have to research this a lot. Although I've built my own computers and am the local "repair" guy, I have no idea what I am doing when it comes to this type of thing....

Thanks for your information, Budman.

Yup UDA is virtual machine, you run it on a vmware server (free).. I have had better luck with the 1.4 version vs the 2.0 beta.. Once its running you config it using web interface -- so its not all that difficult to get running.. But like I said it does take some setup and is more involved than just clicking go ;) So yeah going to have to do a bit of research if you want to use that.

But I do believe there are some easier methods.. Im fairly sure you could use a simple tool like tftpd32 which has a dhcp server and tftp server features (both needed for pxe booting)

Here is a simple writeup I found using tftpd32 to boot floppy images -- you could create one that has your bios update on it for example.

http://home.allegiance.tv/~joem298/

This should only take a few minutes to setup actually -- when I get home I might fire it up just to know how long it should take.. If you want I could setup a image for you with your bios update for the L400 on it, etc. I could prob just zip it up for you to run, etc. I will take a look when I get a chance.

  On 25/01/2010 at 21:43, BudMan said:

Yup UDA is virtual machine, you run it on a vmware server (free).. I have had better luck with the 1.4 version vs the 2.0 beta.. Once its running you config it using web interface -- so its not all that difficult to get running.. But like I said it does take some setup and is more involved than just clicking go ;) So yeah going to have to do a bit of research if you want to use that.

But I do believe there are some easier methods.. Im fairly sure you could use a simple tool like tftpd32 which has a dhcp server and tftp server features (both needed for pxe booting)

Here is a simple writeup I found using tftpd32 to boot floppy images -- you could create one that has your bios update on it for example.

http://home.allegiance.tv/~joem298/

This should only take a few minutes to setup actually -- when I get home I might fire it up just to know how long it should take.. If you want I could setup a image for you with your bios update for the L400 on it, etc. I could prob just zip it up for you to run, etc. I will take a look when I get a chance.

That would be a great, great help.

I tried following the directions myself and got stuck at

"#5

The last file that you will need for your PXE server is a boot disk image. If you have a bootable floppy disk that you want to use for booting your M200, you can skip this step. Otherwise, find a blank floppy disk and insert it into your PXE server. Unzip the contents of 'BFD full package v1.0.7.zip' into a temporary directory. Open a command prompt and browse to that temporary folder. Run the command 'bfd msnet' in order to create the bootable floppy. "

It seems as if my host computer still needs a floppy disk in order to complete this step.

Unless I find a floppy emulator...maybe...?

EDIT: Man, this is ridiculous. I can't find a x64 compatible virtual floppy drive anywhere.....

Edited by Kondrath

here you go dude -- I did a test run.. I could not get the latest version of tftp32 to work (will look into that later I think), backed off to version 3.03 or something.

Anyway.. I even made a floppy image for you ;)

Everything you need is in the Zip file.. Just unzip it to say c:\tftpd, run the tftp32 exe and make sure you setup the dchp server stuff. here is screen shot of mine. You might need to change the network to match up to your machines IP etc.

post-14624-12644615811108_thumb.jpg

Make sure you turn off any other dhcp servers on your network (your router for example when doing this) Then boot your machine with pxe.. You will end up at a A:\ prompt -- and then just run the bios boot file for the L400A9.exe I put into the image.

post-14624-12644616684629_thumb.jpg

See here is the virtual machine booting from the pxe server.

post-14624-12644618229376_thumb.jpg

You will then see it load the image file and boot caldera dos, etc..

Now If this F's up your machine -- thats on you dude.. Just trying to help.. Don't use my bios update file if your worried, etc. I grabbed the one for the L400 so if that is what your machine is - it should work.

tftpd.zipFetching info...

  • Like 2
  On 25/01/2010 at 22:15, Kondrath said:

..

EDIT: Man, this is ridiculous. I can't find a x64 compatible virtual floppy drive anywhere.....

x64? as in 64bit? i dont think the laptop supports that. look for 32bit or x86.

btw if this is a dell, cant you install the bios from windows?

if not another possibility is creating a boot cd with the bios files.

do you have access to a cdrom somewhere temporarily? you could burn a bootable dos disk from your desktop and then add in the bios file.

http://www.bay-wolf.com/bootcd-bios.htm

Im not sure why he think he needs some 64bit virtual floppy drive? Unless he was looking to create the floppy image.. I just grabbed freedos.exe and extract the files using winimage, then added his bios file to create the imz file.

I agree with you more modern stuff allow for updating the bios by running a file inside windows - but for that old L400 the only bios files I saw were one to create a floppy image, and the exe you put on your own floppy.

Sorry for that last PM, the boards were messing up and I couldn't update you on the progress. I figured out how to do everything, and the bios is successfully flashed!

Thank you very much for all of your help!

Though, I don't see a boot from USB in the BIOS... :rofl: ... Hopefully I'll figure the rest out!

Edit: Nevermind, it added support for an F12 boot menu.

Thanks again!

Edit again: Still not booting into the USB. I really hope it's just my USB stick or something. But it seems that the USB is not getting any power until windows starts. Sigh.

Edited by Kondrath

If you having problems booting from a usb.. You can do the same pxe thing -- just need a boot image that has network support.. Boot a WinPE disk, Bart disk for example that has network drivers and then you can run the setup over the network.

I know what laptop you have -- let me see if I can see what nic it has to be able to have the driver for network booting, etc.

edit: hey ran across this site -- they even mention your laptop L400, and its using the tftpd setup, etc.. so with some very minor modifications to what you already have running you should be able to get xp installed

http://blog.webpirates.co.uk/?p=56=1

Windows XP PXE installation

Edited by BudMan
  On 26/01/2010 at 02:31, BudMan said:

If you having problems booting from a usb.. You can do the same pxe thing -- just need a boot image that has network support.. Boot a WinPE disk, Bart disk for example that has network drivers and then you can run the setup over the network.

I know what laptop you have -- let me see if I can see what nic it has to be able to have the driver for network booting, etc.

edit: hey ran across this site -- they even mention your laptop L400, and its using the tftpd setup, etc.. so with some very minor modifications to what you already have running you should be able to get xp installed

http://blog.webpirates.co.uk/?p=56=1

Windows XP PXE installation

Awesome. Looks like I'm saved! I was just about to try something crazy (I think I might still try it), but I was going to use my PSP and see if it would act as a USB device since it is powered. And if that failed, I was gonna try some SD card readers. :laugh:

After the PSP, I'll give that guide a go and report back.

EDIT: or my Nikon D40 :D

It has been done.

dsc1317i.jpg

I don't think I've ever been so happy to see that screen.

The tutorial's steps (specifically the structure of folders and dos commands) did not work for me, so I had to figure it out myself and make a functioning directory. It was worth it, though!

Worst XP install EVER. :laugh:

I would have to run through the tut myself to see know -- but looks like you got what you need done done.. And learned quite a bit in the process to boot! Which is always a plus.. Now you know and have a method of booting pxe on your network.. there are lots and lots of things you can do with that!! Its a nice tool to have in your tool belt.

You might want to still look into UDA if you want a slick way to install multiple OSes -- pick from a menu, etc.

  • Like 1
  • 10 months later...
  On 19/12/2010 at 17:07, delukard said:

HI! thanks for all this info and the files, But i get stuck at A: in dos, what file should i run? i dont see the bios file

thanks!!

Sorry i couldn't edit post.

I runs the name of the dell bios file and it updated the bios , TY very much for this image!.

all i need to see if i can boot fom usb now.

Sorry for posting again, after flashing bios to A9, it doesn't boot from usb (so sad) so i was wondering, how hard would it be to install XP from PXE? hope someone helps.

I was reading a tutorial, but for some reason, i cant seem to find Bart Network Boot Disk. i finde the files, but they are incomplete.

This whole thread is about doing install from PXE!!

And bios image was run from booting PXE ;)

Who every mentioned Barts network boot?? Grab the UDA I mentioned

http://www.ultimatedeployment.org/

  On 20/12/2010 at 01:05, BudMan said:

This whole thread is about doing install from PXE!!

And bios image was run from booting PXE ;)

Who every mentioned Barts network boot?? Grab the UDA I mentioned

http://www.ultimatedeployment.org/

yes budman i grabbed today the files you posted and then i flashed the bios by using PXE. Now i want to install xp trough PXE and was following a tutorial and the only file i can't get is the Barts network boot.

I'll download the file you mentioned (ultimate deployment) and try using that . I'm not that amateur, but i have never used that tool. i'll google some tutorials, hoping it let me install XP to the l400

BTW i read about a guy that installed xp on another laptop, and then removed the intel ide drivers (safe mode )and put the HDD again in the l400 and booted fine.

I did that but i got a cannot read disk error.

you guys seem very knowledgeable hope someone helps me.

I already installed lubuntu on the laptop. but the thing is that i got this laptop for my 9 yr daughter, and i don't think i can teach her to use lubuntu.

I was thinking of installing Windows ME on anotehr laptop and just move the drive.

All this trouble is because i want to teach her to transfer music to her mp3 and to use encarta (her mom doesn't have internet) and for this i need Windows.

I was following this guide but some of the files i cant get them pxelinux.0 memdisk menu.c32 bartdisk.IMA

I can follow instructions very well, and i feel confident that i i had teh files i can install xp to the laptop.

I'll apreciate it if someone has this files or point me to a valid link.

Thansk for your help!!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • PornHub commits to age checks for UK users by 25 July by Paul Hill Ofcom, the UK’s digital regulator, has announced that PornHub and several other porn sites have agreed to put robust age checks in place by the deadline next month on 25 July. The confirmations to Ofcom will likely be used by the regulator against the companies if they fail to comply by the deadline as justification for a fine. The companies that have publicly stated they’re going to have safeguards in place by the deadline are PornHub, BoyfriendTV, Cam4, FrolicMe, inxxx, Jerkmate, LiveHDCams, MyDirtyHobby, RedTube, Streamate, Stripchat, Tube8, and YouPorn. There may be other companies that are preparing, these are just the ones that were happy to be named. Ofcom has been given the task of making sure porn sites comply with age check rules. If companies don’t follow the rules, Ofcom has the power to impose fines and even apply for a court order to ban websites or apps from being available in the UK. These rules are part of the wider Online Safety Act, which aims, in part, to keep children safe online. So far, it has launched investigations into four porn providers for failing to comply with its requests. Oliver Griffiths, Ofcom Group Director of Online Safety said: “Society has long protected youngsters from products that aren’t suitable for them, from alcohol to smoking or gambling. But for too long children have been only a click away from harmful pornography online. “Now, change is happening. These age checks will bring pornography into line with how we treat adult services in the real world, without compromising access and privacy for over-18s.” The new age verification methods come in various shapes and sizes (pun intended) including credit card checks, open banking, and facial age estimation. While these may not keep all kids from accessing porn, they’ll act as a significant hurdle. For adults concerned about handing over information to access porn sites, Ofcom said that the measures do not harm your privacy. All of the age assurance methods are subject to the requirements of UK privacy laws, including on processing personal data. The Information Commissioner’s Office (ICO) is overseeing this area to ensure companies comply. Ofcom’s own studies have found that 3% of 8-9 year-olds have been exposed to online pornography at some point. This highlights how easy it is to find this content and clearly something has to be done. It’ll be interesting to see how these measures actually play out when they get rolled out.
    • Looks like MS is officially extending Windows 10 support while stopping just short of officially changing the end date. I teased in the last article that the process for gaining free support was a little invasive, but this is basically just giving it out for free, so I guess I'm taking back those words.
    • Microsoft shares Windows 10 ESU key guide for office PCs that don't support Windows 11 by Sayan Sen Recently, the Indian government issued a caution about the upcoming end of support for Windows 10 which is about four months away. Interestingly, on that very day, Microsoft made a major announcement regarding this as the tech giant debuted free enrollment options wherein support would be extended for another year at no extra cost. Microsoft is also trying to make it easy to set up Extended Security Updates (ESU) with a new tool. You can see in the image below: New ESU enroll wizard Following that, today, the company has shared a new guide on how to activate ESU via Intune in the case of Windows 10 office PCs that are not supported on Windows 11. First up, Microsoft has reminded users of the prerequisites of Windows 10 ESU: The system needs to be on Windows 10 22H2 with KB5046613 (November 2024 Patch Tuesday) or newer. The device needs access to the network endpoints required for client activation. The process that is used for activation needs administrative privileges on the device. The guide contains several PowerShell scripts and are meant for IT admins and system admins. One of those is a validation script "Check-Win10ESUPrereq.ps1" that Microsoft has published to help "verify a device has the required version and patch level for Windows and it can communicate to the required network endpoints." Essentially, it checks if the aforementioned requirements are satisfied and can be used for troubleshooting against those prerequisites. After the "validation," Microsoft says there are two ways to proceed with the ESU key activation. First. it can be done by either Remediation through: Detection Script (Win10ESUActivation-detect.ps1) and Remediation Script (Win10ESUActivation-remediate.ps1). And second, by Win32 Application with Win32 Install Script (Win10ESU-install.ps1) and Win32 Detection Script (Win10ESU-detection.ps1). In the case of Remediations, Microsoft mentions "some licensing considerations" due to which "some smaller companies may not have that option." Finally, Microsoft has also shared some Activation IDs for manual verification via Slmgr VB script for obtaining volume activation information: Win10 ESU Year1: f520e45e-7413-4a34-a497-d2765967d094 Win10 ESU Year2: 1043add5-23b1-4afb-9a0f-64343c8f3f8d Win10 ESU Year3: 83d49986-add3-41d7-ba33-87c7bfb5c0fb You can check the full guide and the details here on Microsoft's official Tech Community website.
    • It blows me away how overpriced Synology is. $600+ for a 3+ year old SATA NAS with only gigabit networking!! Even for 2022 that is pretty low-end hardware. Yes, the Synology software is fantastic, but if we say this hardware is worth $300 max (and that is even giving a generous premium to the fact that it is made by a respected OEM), their software is NOT worth an additional $300, especially considering it is locked to the hardware it shipped on and you have to pay that premium again for your next device. Important correction to the specs table above. Saying Disk Capacity is 72TB and even going further to detail that is 4x18, strongly implies it comes with those disks, which it does not. I would rather see it say "Max Capacity: 72TB (disks not included)."
    • well again if w11 adoption its so high there's no reason why they try to explain us why is "better" to move to w11. If they are so right about their downgraded UI, why they add some of their UI elements back things like never combine and now small icons. Last time i check majority is still on 10 over 11 so yeah millions of users that did not upgrade to w11
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      ATLien_0
      207
    3. 3
      +FloatingFatMan
      169
    4. 4
      Michael Scrip
      149
    5. 5
      Steven P.
      123
  • Tell a friend

    Love Neowin? Tell a friend!