Apple uses bad suppliers


Recommended Posts

Apple has released a report in which it reveals that in the last year it used three suppliers that had hired underage workers, while others are underpaying staff on a regular basis.

The Apple Supplier Responsibility Report makes for slightly uncomfortable reading. Not only have Apple's suppliers had eleven underage workers on their books, but others were improperly disposing of waste and chucking workers' rights in the bin.

"Apple is committed to ensuring the highest standards of social responsibility wherever our products are made. We insist that our suppliers provide safe working conditions, treat workers with dignity and respect, and use environmentally responsible manufacturing processes," begins the report before detailing a catalogue of horrors.

Read full article on TheInquirer.

Link to comment
https://www.neowin.net/forum/topic/878786-apple-uses-bad-suppliers/
Share on other sites

To be honest its not like they can use other supplies. Foxconn has done a lot of bad stuff and everyone uses them. EVGA, NVIDIA, Microsoft etc

Some of these production companies are just to big and there does not exist a company that can fill the high volumes of these companies on this list.

The document outlines Apples approach to auditing and it looks good to me. Audit every factory & dormitory regardless of past performance or location, interview employees and management.

Most companies use these same suppliers without thinking twice about what goes on in those shops.

The title of this thread was very misleading. Apple was the only one who spoke out about it while PC companies who use the same suppliers didn't say a word. Well, another not very surprising revelation from China I guess.

The title of this thread was very misleading. Apple was the only one who spoke out about it while PC companies who use the same suppliers didn't say a word. Well, another not very surprising revelation from China I guess.

yet they still use the same suppliers..that is what we call hypocrisy!

But, I do still think the title is wrong. It is not just apple using these supplier. The title wrongfully implies Apple is the only company working with these suppliers.

I can pretty much guarantee Foxconn is the worst of the companies involved. Even having to deal with them as a business is excrutiating. They must be by far the cheapest manufacturer around in order to get all the contracts they do because there is no other reason to use them. It sickens me that Apple charges so much for their computers using Foxconn boards.

The title of this thread was very misleading. Apple was the only one who spoke out about it while PC companies who use the same suppliers didn't say a word. Well, another not very surprising revelation from China I guess.

Good point. Placing Apple in the title pulls in more viewers. All the trolls need come throw their 2 cents of hate in about Apple.

I can pretty much guarantee Foxconn is the worst of the companies involved. Even having to deal with them as a business is excrutiating. They must be by far the cheapest manufacturer around in order to get all the contracts they do because there is no other reason to use them. It sickens me that Apple charges so much for their computers using Foxconn boards.

I had always thought they used ASUStek.

It's good on Apple to be looking to take a stand on this. Most companies use these same suppliers without thinking twice about what goes on in those shops.

I imagine if the truth was known almost every company that buys from China would find this going on.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I sort of agree with you on that. I had a telescope - a real hefty thing, although only around 500CHF - that got me so fascinated about the stars and planets. I would stare for hours, amazed that I could see the craters of the moon or the rings of Saturn in "realtime" (quotations because, y'know, speed of light and whatnot). A friend of mine has a telescope like the one mentioned in the review, and the pictures are amazing to look at. But there is something missing for me. I may as well just go to NASA's website and look through their gallery.
    • As opposed to catching bad press because it's the engine's fault? You didn't really think this through did you? lol. The engine has all the tools a dev needs to optimize their game, Epic isn't gonna hold their hand to make sure they use them. Also, Epic isn't forcing anyone to use Lumen, Nanite or super high resolution meshes and textures. Just because Nanite can render meshes with millions of polygons doesn't mean you should use it like that, in fact, Epic recommends you avoid doing that. Most of the stuttering can easily be fixed by cutting down on unique shaders by using master materials and generating a PSO cache and compiling every shader before loading the game and managing what must be loaded and unloaded at runtime, it's up to the developer to set all that up properly.
    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!