MSI April Fools joke launches early and angers users.

By Boeing 787
in Back Page News

 Share

Recommended Posts

Veteran

Boeing 787

Posted
Posted
The MSI-forum and MSI-support team are fed-up with explaining you what can be found in the manual.

I mean, come on, how hard is it to read a manual?

They are printed on paper so you see them.

We have been talking to MSI for a couple of years and came up with a solution.

It has been implemented on a few boards for some time and with big success.

It had various names, like CoreCenter (1st gathering tool) upto DrMOS (fully automatic)

Some of you noticed because Windows wanted you to install a driver, but you couldn't find the manufacturer.

On AMD systems this was called the Away-driver.

What you didn't know is this, this driver activates the RTFM-chip. (Re-Turn inFormation to Manufacturer chip)

It means it can detect if you read a manual as well stores the parameters you have set in the BIOS.

As soon as you start Windows we are informed about your settings and manual readings.

As we have been monitoring peoples behavior for some time and combined those with the RMA information from returned boards.

At the same time monitoring questions on the forum and matched the IP's.

We have made a discovery.

A lot of RMA is unneeded and unwanted, many happens due to user mistakes, numbers show that 90% of the RMA is OC people killing boards and

newbies connecting the wrong connectors or insert parts that should not be inserted.

Or simply forget to remove standoffs or CPU-power.

MSI plans on tackles those numbers, and the RTFM-chip will give a readout of what you have done when it did post or attempted to post!

Checking on you isn't new, Homeland-security done this ever you installed XP-SP3 or above, but their info in encrypted so useless to MSI.

So MSI decided to ban people from support, RMA and the forum who has done the damage themselves or didn't read the manual the first of next month.

We know who you are, and we have gathered enough information via our RTFM-chip.

The only question is, should MSI continue to do this? As some information is real bad.

Will this hurt your relation towards MSI products?

Please let us know, as we have to talk to MSI management the first of next month and make them decide what to do with the information.

Second email:

Hi there,

We are sorry people took this for prank for serious.

Nobody seem to have wondered what RTFM really means.

If you put the term in Google, you will find it is telling you to read the manual.

Just think, how would a chip check if you read manuals?

We thought of this prank after answering the many posts where people ask the obvious that is already in the manual.

But we learned a valuable lesson, no more April-fools jokes from the forum, a 10 year old thing just died.

Sorry that you took it for real and got mad.

PS: RTFM = Read The F***ing Manual

Grand Master

techbeck

Posted
Posted
Late last week, global hardware manufacturer MSI informed the 97,000+ people registered with its support forums that its reps were "fed up" with repeating information easily found in user manuals. The company even went so far as to say that it had installed an "RTFM" chip on its hardware boards to determine whether users had read their manuals and that anyone who hadn't read them would be banned from support.

For the uninitiated, RTFM is a widely recognized acronym for "Read The ****ing Manual".

"The MSI-forum and MSI-support team are fed-up with explaining you what can be found in the manual," read an email message from the support team, which apparently went to every person registered for the company's support forums, including customers, vendors, and press. "I mean, come on, how hard is it to read a manual? They are printed on paper so you see them."

The so-called RTFM chip, the email went on to say, had been monitoring the behavior of users for "some time".

"So MSI decided to ban people from support, RMA, and the forum who has done the damage themselves or didn't read the manual the first of next month," it said. "We know who you are, and we have gathered enough information via our RTFM-chip."

The email went out on March 25, and the company's support team now says it was an April Fools' joke. "We are sorry people took this for prank for serious [sic]," reads a forum post and email message from the company's support team head. "We thought of this prank after answering the many posts where people ask the obvious that is already in the manual.

"But we learned a valuable lesson, no more April-fools jokes from the forum...Sorry that you took it for real and got mad."

What's more, some people didn't take it for real and got mad. "The 'joke' might have been funny if you'd maybe not been quite so abrasive about it," says one poster. "And as pointed out by others, you're WELL off the mark for an April Fools joke. There's a pretty limited window for April Fools gags and you lot now just look like idiots."

For the uninitiated, April Fools' jokes typically occur on April 1 - not March 25.

You can argue whether the email was a joke or a rogue message from some embittered support rep who finally went over the edge or somewhere in between. But one thing's for certain: Idiot is not too strong a word. ®

http://www.theregister.co.uk/2010/03/28/msi_support_forum_email/

Guh, I really hate not being able to edit the title.

Grand Master

Sulphy

Posted
Posted

super LOL!!!! laugh.gif

too true..... people should read manuals...!!! if they dont have the manual..... then there is an amazing tool - GOOGLE...

thats what i tell users in my domain that come up with stupid things!!!! :)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft Edge gets tons of security features, including AI model that can see your screen

      By WaltC · Posted

      Just another reason (aside from many others) not to use Edge. Firefox 153.0b5 DEx64 has a similar feature added recently in prior builds that I will turn off at some point when I get around to it. It's the new "Something looks suspicious" page that pops up here and there. It cleverly hides itself between web pages that I've actually visited; as a result, you know, of selecting a web page and telling the browser where to go. The interesting thing is that it does not produce these warnings from pages that I, as the only intelligent user of the browser in my system, have ever directed the browser to open! What seems to be happening is that the browser looks at all the goofy ad links on a web page I do actually open and selects one that "looks suspicious" and then creates the "something looks suspicious" web page, which is neatly inserted, as mentioned, between web pages my RB ("real brain") has directed the browser to load in a session. The thing is, I usually look at links I am considering to follow before I ask the browser to load them, and in cases I have noticed where the link does indeed look suspicious, most of the time I will choose to not follow the link at all. Doesn't everyone do this or something similar? I am picky about what I voluntarily load... (I don't like links that start off fine, with a site designaiton that seems normal enough but then is followed by indecipherable alphanumeric strings many, many lines long, etc. I tend to reject those because they look suspicious. They may not be, but I don't care... I'll stay with Firefox, of course, if for no other reason than they usually let you turn off the junk you don't like. And because it isn't Edge... But at some point Microsoft will come to realize that putting your bookmarks on the left side is a Good Thing for a lot of people, just as Microsoft discovered when it had the bright idea of nailing the Windows taskbar to the bottom of the screen, when for decades Microsoft browsers had left that placement up to the user. They have finally reversed the obscenity of that decision. Finally.
    • Google's new hand-wave reCAPTCHA can be bypassed with a stock photo

      By Ccl Ncc · Posted

      Google was using the old CATPCHAs data to train their LLMs. What is the say they won't use this camera data of users to train their LLM? these companies need some strict regulations!
    • How do you future-proof a home or small office network?

      By Mindovermaster · Posted

      Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200

      By Copernic · Posted

      NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Politically funny images of the World

      By PsYcHoKiLLa · Posted

      Ah. La Fontana De Incontinentia ! Bella ! Bella !

  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!