Marvell Yukon 88E8056 issue


Recommended Posts

recently rebuilt my desktop using my ASUS P5B Deluxe, put Windows 7 on it

now initially the ethernet controller was working fine

however, every time i restart, my system tray icon has the yellow triangle saying "no internet connection"

going into Device Manager, it actually shows 2 ethernet controllers, both Marvell Yukon, one is 88E8056 PCI-E Gigabit Ethernet Controller and one is 88E8001/8003/8010 PCI Gigabit Ethernet Controller

th_44678_device_manager_122_468lo.jpg

basically, i have to have only the 88E8056 one running to have any internet connection

when the computer starts, i get this yellow triangle of no internet connectivity; i go into device manager and have to disable the 88E8001/8003/8010 controller every time, then i have internet connectivity

but every time i restart, it automatically finds the 88E8001/8003/8010, installs driver software, then gives me the yellow triangle saying "no internet connection", so i have to do it all over again

i hate doing this every single time i restart and it's frustrating

any help would be appreciated

-Leon

Link to comment
https://www.neowin.net/forum/topic/890294-marvell-yukon-88e8056-issue/
Share on other sites

The Marvell ethernet controllers that Asus uses in their boards do not work reliably with Windows 7. I have two different Asus boards (P6T Deluxe V2 and P5E3 WS PRO) each having dual gigabit Marvell controllers. I have also encountered another person here on Neowin with similar problems.

My situation was a bit different in that when under load, my network connection would go down and I would then have to disable and re-enable the NIC. This happened with all four NICs. Looking in my event log, I found the driver throwing constant "Driver Status Error" events several times a second. Believe it or not, updating to the latest Marvell drivers from their site made it worse; the best I ever got it was using the built-in Windows 7 driver.

Truth be told, I eventually got 3 Intel PCI Express 1x cards for all my PCs/Server.

Does any of this information resemble your situation? Have you looked in the event log? BTW, I am using Windows 64-bit but I don't think that make a difference.

thanks to both of you for your quick responses

i updated the drivers, but the same issue is happening

i'm not getting Driver Status Error events at all

however, what you Xenosion said (having to disable then re-enable the NIC) is exactly what i have to do; after startup, i go into Device Manager, disable both controllers, then enable the 88E8056 controller, and after about 3 seconds i have connectivity

i considered purchasing a separate card for my desktop, but the reason i rebuilt this setup is because my previous motherboard was having damn near the same issue, and i thought it was a hardware issue, not a software issue

I'm on 32bit but I also have IPV6 disabled since I can't use that for some time yet. I've never had it bomb out on me even with the stock drivers. Just the initial getting it up and running from way back.

You have an Asus board with Marvell NICs?

I also disabled IPv6 for troubleshooting although it shouldn't matter and turns out it didn't either.

thanks to both of you for your quick responses

i updated the drivers, but the same issue is happening

i'm not getting Driver Status Error events at all

however, what you Xenosion said (having to disable then re-enable the NIC) is exactly what i have to do; after startup, i go into Device Manager, disable both controllers, then enable the 88E8056 controller, and after about 3 seconds i have connectivity

i considered purchasing a separate card for my desktop, but the reason i rebuilt this setup is because my previous motherboard was having damn near the same issue, and i thought it was a hardware issue, not a software issue

You have changed the ethernet cable? How is your network setup? (Switch, Router?)

Also, go to the properties of you NIC and disable IPv4 Checksum Offload.

Could it be the classic "checksum offloading" issue? (Look in the Device Manager under the settings for the NIC and see if there's an option for TCP Checksum offloading. It causes dropouts on some NICs if it's on.)

Grr beat me to it.

You have changed the ethernet cable? How is your network setup? (Switch, Router?)

Also, go to the properties of you NIC and disable Checksum Offloading.

It's connected to a Linksys wireless router, but I'm fairly sure it's not the router or the cable, since I've tested it on two laptops (connected to the ethernet cable) I have here and both work with no issues.

well this time i tried disabling IPv6, then disabled TCP Checksum Offload on the 88E8056 controller

then when i restarted, still had no connectivity, so i went into Device Manager

it showed some "Teredo Tunneling Pseudo-Interface", which i've never seen before

th_47890_device_manager2_122_245lo.jpg

i uninstalled that Teredo thing, but that didn't change anything

the yellow "no connectvity" triangle went away, but i didn't actually have any connectivity (couldn't load any web page)

i then disabled TCP Checksum Offload on the 88E8001/8003/8010 controller, and i had connectivity

restarted, but the same crap is happening, i get no connectivity upon startup

are there any settings similar to TCP Checksum Offload which i should disable?

i see a bunch of stuff like IPv4 Checksum Offload, UDP Checksum Offload (IPv4), etc.

if there are any of those which i should be disabling, let me know

thanks again for your help guys

are there any settings similar to TCP Checksum Offload which i should disable?

i see a bunch of stuff like IPv4 Checksum Offload, UDP Checksum Offload (IPv4), etc.

if there are any of those which i should be disabling, let me know

thanks again for your help guys

Do you have any add-on NIC that you could try for troubleshooting?

unfortunately no; i'd like to avoid spending more money on this desktop right now, but $10-20 for a cheap NIC card wouldn't be the end of the world, if no other solution works

Did your other computers you connected to your router have gigabit NICs? In the properties of the NIC find something like "Link Speed & Duplex". It is probably set to Auto Negotiate. Set it to 100Mbps Full Duplex, if that doesn't work try setting to 10Mbps Full Duplex.

In the properties of the NIC find something like "Link Speed & Duplex". It is probably set to Auto Negotiate. Set it to 100Mbps Full Duplex, if that doesn't work try setting to 10Mbps Full Duplex.

i can't believe it, but this actually seems to have solved it!

i initially just changed it from Auto-negotiate to 100Mbps Full Duplex on one of the controllers, then restarted, and had connectivity right away

changed it on the other controller, restarted, instant connectivity

unbelievable, i even looked at that earlier and ignored it

thanks Xenosion, much appreciated!

does all yukon have problem.. i have posted before that i am unable to disable my nic card coz i am using usb wireless. as soon as i disable it the computer hangs and even if i manage to disable in safe mode then the computer takes like forever to come up to the desktop and then when i click start then it hangs as usual. so suggestions??

does all yukon have problem.. i have posted before that i am unable to disable my nic card coz i am using usb wireless. as soon as i disable it the computer hangs and even if i manage to disable in safe mode then the computer takes like forever to come up to the desktop and then when i click start then it hangs as usual. so suggestions??

It doesn't sound like yours is the same problem. I would create another thread starting from the top or link to the previous one.

well great, it looks like it only temporarily fixed the problem

just started up again on a cold boot and the stupid connectivity notice happened again

had to disable and re-enable it

so i'm either stuck with a junk onboard controller, or i have to buy a new one

i'm definitely just going to buy a new one, i don't feel like dealing with this frustration all the time

It doesn't sound like yours is the same problem. I would create another thread starting from the top or link to the previous one.

I did start the tread long ago and no one responded to that either they couldnt or they wouldnt so i managed to slip here...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Who is paying for this 30x scale-up? Its sounds expensive.
    • Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop by Sayan Sen Despite the advent of AI-generated imagery, Adobe's Photoshop remains one of the most popular tools on this planet. Adobe does not have a publicly reported total user count but it's probably not wrong to assume there are millions. As of 2025, Adobe Creative Cloud has had approximately 41 million paid subscribers, many of whom likely use Photoshop. In addition, more than 166,000 companies worldwide are apparently also using the app. These figures are according to a very recent report by SQ Magazine. Out of them, it is fair to assume that many are probably running Windows. As such, there is good news for these users as Microsoft has announced Photoshop is getting a big 20% performance boost on x86-64 (AMD64) systems and a 13% bump-up on Arm devices. This is definitely great news for them as many have complained about the slow performance and general sluggishness of Photoshop on Windows 11 ever since the advent of the latter back in 2021. If you are wondering how Microsoft managed to do this, the answer lies in a combination of compiler-level optimizations and a technology called Sample Profile Guided Optimization (SPGO). According to Microsoft, Adobe worked closely with the company’s Visual C++ team and adopted the latest MSVC toolchain enhancements together with SPGO to squeeze more performance out of Photoshop’s CPU-bound workloads. Unlike traditional Profile Guided Optimization (PGO), which requires developers to create special instrumented builds and run lengthy training workloads, SPGO gathers performance data directly from optimized release binaries. This means Adobe could collect real-world usage information which gives a major advantage to this technique, as companies could leverage data collected from actual customer workloads rather than only relying on synthetic benchmark runs. In theory, this should allow optimizations to better reflect how users interact with software in the real world. Thanks to this, there are improvements to code layout, function inlining, hot-and-cold code separation, and other low-level tweaks that help processors execute instructions more efficiently. Essentially the compiler is better able to identify “hot” code paths, those which are most frequently executed, and optimize them accordingly.
    • "The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months¨ I'd prefer to see the lowest price in over a year
    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!