Recommended Posts

Hello, I'm looking for a home theater package that is good, at least for the price. I know for $300-400 I'm not going to get something as nice as I'd like but I wanted to see what you guys thought.

I found this one earlier: http://www.amazon.com/gp/product/B003BEDQR6/ref=s9_simh_gw_p23_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0MHRFVKNDX30EGAJHDKF&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846

Or maybe I could find a receiver somewhere on eBay and find a nice speaker package to go with it?

Link to comment
https://www.neowin.net/forum/topic/915158-looking-for-htib/
Share on other sites

I think the one you linked to is a great value. I dont think you are going to get much better for that price range. That receiver has a good amount of HDMI inputs and features that should hold you over until you are ready to upgrade. The speakers are going to be your weakest link but for movie watching and video games... it is a good 5.1 setup for under $300.

Be sure to get your own speaker wire (12 guage). Onkyo provides speaker wire in box but it is almost like using a piece of string.

definatly don't need 12 guage speaker wire 14 or even 18 would be enough. it is a 600 watt unit divided by 5 possibly 6 channels and that is at max power. The sub is a passive subwoofer meaning that it gets its power from the reciever. The wire that it comes with will probably be adequate and will handle the little bit of power that gets to each speaker (around 100W to each speaker). There isn't going to be enough loss to warrant 12 guage wire.

here you go, a good site for a read up on selecting the correct guage of wire

http://www.roger-russell.com/wire/wire.htm

I'll def be getting better speaker wire. Is it bad that the sub is passive? Should I spend a little more and get a better system? Also, if I do move up to better speakers is that one going to be good enough for good speakers? I have a good set of Acoustic Research speakers but are way too big for my apartment right now. AR-303s I think.

never said to not get better speaker wire, just saying that the included would be adequate; besides sometimes the speakers and/or reciever has special plugs or are hard wired into the speakers themselves. spending more on a different unit is up to you. I think you will be fine with the system you have priced. Just was saying, more or less, that your reciever is rated at 600W max output and that your sub will take up to 100W max by itself.

I would say that you are better off going to a store and listening to systems yourself then shopping online to get the best price, that way you pick the one that you like in your price range that you are looking for. I am a little biased towards sony's high end es series but they are a bit out of your price range, getting into the es is a $600 investment just for the reciever, when you add speakers you could be in the 1500 - 2000 range and that is if you go on the cheap (spend money once every 10-20 years or so, not everytime they change something to sell their products. go big or don't go at all).

I too am a HUGE fan of Sony's ES line. I have a Sony CX90ES 200-disc CD changed and it's amazing. Best sounding cd player I've ever heard and it has a keyboard input and output for a monitor. I loved that thing and I was lucky enough to get it at a Sony outlet new for $300 when it was retailing for $1200. It's too bad I don't really use cd's anymore. I should take a good hard look at my living room to see if I can fit my AR-303's mains in there and then buy a receiver for now, a nice one. Then I can use NHT Zero's as the rears and center speakers. I'm just very, very impatient and I want a system NOW. I'm playing MSG4 right now and I want surround sound so bad, I have a 60" 1080p tv and am using an old stereo with speakers with a 5" and a dome tweeter and that's not too bad. I'm getting a pair of z-5500's soon and selling my z-5300's, I could always use those until I decide.

I have an old str-da333es (80w per channel) bought new in 2000. It is still going strong and sounding great. other than wanting hdmi inputs, I see no reason to replace it. 10 years old and still supports HTX, 5.1, and just about any of the current standards. Sux with no HDMI though, has s video and fiber audio inputs. Again, still not sure if I want to replace it. Stupid blueray.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
    • It's funny when thieves accuse other thieves of stealing. Ai companies just blatantly siphoned all the knowledge of the internet without consent and are now selling it with their service... so excuse me if I find this a bit ironic.
    • TeraCopy 4.0 Build 27 is out.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!