TCP Optimizer v3.0.3


Recommended Posts

I'm curious too is this even useful on Windows 7, I kinda doubted it.

But, looking at that page, the Vista/7 patch below it says it "sets both netsh auto tunning levels", I'm assuming the optimizer does the same now, so, maybe there can be some improvement done by it? .... Waits for others to test it first.

I'm curious too is this even useful on Windows 7, I kinda doubted it.

But, looking at that page, the Vista/7 patch below it says it "sets both netsh auto tunning levels", I'm assuming the optimizer does the same now, so, maybe there can be some improvement done by it? .... Waits for others to test it first.

I'm using it.

So far so good, at least it didn't slow my speed.

Feels snappier a more consistent speed maybe on my PC only or perhaps placebo :p

Anyway I don't think its harmful.

It generates a backup of your previous setting so you can roll-back.

If you want you can even set a System Restore checkpoint before trying it out.

Most of the stuff it tweaks for 7 is described here:

http://www.speedguide.net/read_articles.php?id=2574

So far used it on my desktop and laptop.

There really isn't any need for this anymore with Vista and 7. Both those OSes automatically change TCP settings based on your usage.

For some games that use TCP, both Vista and Windows 7 still send TCP ack's every 2 packages so several games can drastically reduce ping times by changing that to every package. It can lower ping (or what's show as server ms reply times) times by half or even more.

But you don't need an application to do that, it's easy to change with a registry modification. Or a small script that is dedicated for only that and nothing else.

For some games that use TCP, both Vista and Windows 7 still send TCP ack's every 2 packages so several games can drastically reduce ping times by changing that to every package. It can lower ping (or what's show as server ms reply times) times by half or even more.

But you don't need an application to do that, it's easy to change with a registry modification. Or a small script that is dedicated for only that and nothing else.

Sure if you're on like 56k then you might notice a difference. But I'm still going to stick with the difference will be so marginal that you wouldn't even know its there, or there will be no difference whatsoever. Drastic reduction? Highly doubt it.

The entire CTCP stack on Vista / 7 is self-tuning, ie it configures itself automatically when its needed, and as a result pretty much any registry edits is in 99.9999% of the time, detrimental.

I installed this for testing purposes and my speed went up almost 2MB.

I have a 19MBPS connection but due to the quality of the line in my street, I could only get around 14, now its over 16, so I guess it works for me in my circumstance!

Edit: I moved the slider to 19 btw.

For some games that use TCP, both Vista and Windows 7 still send TCP ack's every 2 packages so several games can drastically reduce ping times by changing that to every package. It can lower ping (or what's show as server ms reply times) times by half or even more.

But you don't need an application to do that, it's easy to change with a registry modification. Or a small script that is dedicated for only that and nothing else.

But changing the setting so that Windows sends an ACK response for every packet would actually leave less "room" for the game data, slowing it down.

It's set to 2 by default for better bandwidth allocation, lowering it increases the amount of packets sent.

I installed this for testing purposes and my speed went up almost 2MB.

I have a 19MBPS connection but due to the quality of the line in my street, I could only get around 14, now its over 16, so I guess it works for me in my circumstance!

Edit: I moved the slider to 19 btw.

I take it you tested before, then made the changes and tested after. Your not just compairing to an old test?

Sure if you're on like 56k then you might notice a difference. But I'm still going to stick with the difference will be so marginal that you wouldn't even know its there, or there will be no difference whatsoever. Drastic reduction? Highly doubt it.

It does work, and it does it on ADSL and better connections even. You can check the feedback on a script that is made as a WoW mod, but works for other games that use TCP.

http://www.wowinterface.com/downloads/info13581-LeatrixLatencyFix.html#changelog

But changing the setting so that Windows sends an ACK response for every packet would actually leave less "room" for the game data, slowing it down. It's set to 2 by default for better bandwidth allocation, lowering it increases the amount of packets sent.

That would be a problem if it wasn't a game, which I was talking about, where you want faster response time not better bandwidth.

And as I said, to change this, you don't need the application, it's just one parameter. The script above does it a bit easier for the user.

I would like to add that in general, I would never fiddle with the default settings as the program above does. I just changed TCP Ack frequency, because it improved my MMO experience (in 2 games that I ran back then). Currently, I'm not playing any games that would improve due to this change, so at the moment I don't need to change anything from default.

...

That would be a problem if it wasn't a game, which I was talking about, where you want faster response time not better bandwidth.

And as I said, to change this, you don't need the application, it's just one parameter. The script above does it a bit easier for the user.

Except the actual response time is the same, it's just talking to the remote system more often.

It does, and it does it on ADSL and better connections even. You can check the feedback on a script that is made as a WoW mod, but works for other games that use TCP.

http://www.wowinterf....html#changelog

Ah. How about you actually research that script before talking about it huh? Well since you actually have no knowledge on how Windows network stack works, and what the ACK frequency actually does, and like talking about placebo effects, I'm going to simply quote a blues post on the very same "feature":

No he's right, you do not lower the amount of ACKs, you increase it.

Packets will still take exactly the same amount of time between you or your sever, the only real effect changing this registry entry is the latency calculations will think there's lower latency than there actually is.

Your computer only THINKS the response time is better since its talking to the WoW servers more often. HOWEVER the lag is still there, since you haven't magically increased your bandwidth / speed. Your actual response time / ping, as a result, is still EXACTLY the same.

Of a random sidenote, you'll notice that the recommended values for ACK INCREASE as your speed increases:

1 GigaBit: TcpAckFrequency = 13 (RWIN = 64 KByte)

100 MegaBit: TcpAckFrequency = 5 (RWIN = 17 KByte)

10 MegaBit: TcpAckFrequency = 2 (RWIN = 8 KByte)

Ah. How about you actually research that script before talking about it huh? Well since you actually have no knowledge on how Windows network stack works, and what the ACK frequency actually does, and like talking about placebo effects, I'm going to simply quote a blues post on the very same "feature":

Ah, a comeback, you must have been busy searching for info after your first post, as you didn't seem to know this info then even though it was clear what it was about. Yet you still only post a quote from a "blue" without any technical information. Who is this Blizzard support guy and what is his technical knowledge of TCP? You are just assuming a Blue post means it's good. For sure Blizzard don't want people to change this is because it does increase traffic to servers and possible congestion.

Granted I'm not an expert, but I've tested it and it seemed to work fine. If it was a placebo effect, I can accept that, if I get a real and detailed technical explanation from a person that is an expert on these matter on why it does not work. Your responses mean nothing, as you probably don't know anything about it.

Ah, a comeback, you must have been busy searching for info after your first post, as you didn't seem to know this info then even though it was clear what it was about. Yet you still only post a quote from a "blue" without any technical information. Who is this Blizzard support guy and what is his technical knowledge of TCP? You are just assuming a Blue post means it's good. For sure Blizzard don't want people to change this is because it does increase traffic to servers and possible congestion.

Actually I went and looked through the source code of your amazing "mod" (it's simply in VB and you can open it in Notepad) did a very quick google search to see what blizzard had to say on the matter and found that.

And sorry that I don't sit here waiting for you to reply.

Granted I'm not an expert, but I've tested it and it seemed to work fine. If it was a placebo effect, I can accept that, if I get a real and detailed technical explanation from a person that is an expert on these matter on why it does not work. Your responses mean nothing, as you probably don't know anything about it.

Go check MSDN then.

I mean just logically think about it for a second. If such a small registry edit can yield, as you claim, a massive performance gain. Why does blizzard spends hours and hours on enhancements to WoW's networking when they can just change a registry value? I mean considering their entire game requires a constant connection to the server, and that a lower response time means better gameplay. Wouldn't blizzard want that? Or are they just happy with people suffering with high pings, while their developers laugh all day.

Why do other game makers spend hours on it too? I mean sure it may affect stuff out of the game, but it isn't hard to remove a registry edit and that can simply be coded in to be done when the game exits.

Hell, why did Microsoft do major changes to Windows TCP stack from XP to Vista? I guess all their experience, knowledge and ability comes to nothing. Because they still haven't figured out that changing a value from 2 to 1 yields "massive benefits"

What are you going to tell me next? That increasing the number of half-opened connections in XP magically increases your internet speed as well? I mean I heard tons of people back in the XP days (and even some today) who seem to believe that...

Someone tell me how this will actually speed up things. A standard Windows install here seems perfectly capable of maxing out both my LAN and my 10Mbit internet connection. If it couldn't at least do the latter, then it would be ridiculous to the point where Windows is a product so defective that it should be banned from the market for being ****.

I doubt this does anything for ADSL, in the UK at least. BT only give out speed increases per 0.5mbit here for every sync range you're in. e.g. for a set range of 4544 - 5119 and I sync 4600 it would be 4.0mbps. If I sync 5100 it would still be 4.0mbps, it won't jump to the next increment unless I sync 5120. And seeing this is all done on the router, TCP Optimizer wouldn't do much on Windows as I already get the full 477-480kb/sec in my downloads

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The unified inbox, when it arrives, will be a powerful argument for those who have > 1.
    • Fan Control V269 by Razvan Serea Fan Control is a powerful and versatile portable utility that allows you to monitor, control and customize the fans of your GPU and CPU to keep your machine cool and running smoothly. Fan Control supports a wide range of devices and hardware configurations, giving you complete control over your computer's cooling system. Fan Control backend is mainly based on LibreHardwareMonitor, an open source fork of the original OpenHardwareMonitor. This means that hardware compatiblity is entirely open for anyone to contribute, and doesn't rely on a single developer who may stop caring at some point. Combined with the plugin system, Fan Control is unlocked for many generations of hardware to come. Main features Guided setup process on first launch Save, edit and load multiple profiles Change the theme and color of the application. Multiple temperature sources ( CPU, GPU, motherboard, hard drives... ) Multiple fan curve functions, including a custom graph Mix fan curves or sensor togethers (max, min, average) Low resource usage Advanced tuning with steps, start %, stop %, response time and hysteresis FanControl V269 changelog: Allow only 1 service client at a time App title no longer show the full path Add service retry policy by default Fix pre-pairing issue between control and speed cards Fix a bug with ADLX % (duty) reporting Download: FanControl V269 | Installer ~20.0 MB (Open Source) View: Fan Control Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I spent a good 15 min today trying to get new Outlook to use my default browser instead of forcing links into Edge. That kinda tactic is shady and it sucks.
    • Vivaldi 8.0.4033.42 by Razvan Serea Vivaldi is a cross-platform web browser built for – and with – the web. A browser based on the Blink engine (same in Chrome and Chromium) that is fast, but also a browser that is rich in functionality, highly flexible and puts the user first. A browser that is made for you. Vivaldi is produced with love by a founding team of browser pioneers, including former CEO Jon Stephenson von Tetzchner, who co-founded and led Opera Software. Vivaldi’s interface is very customizable. Vivaldi combines simplicity and fashion to create a basic, highly customizable interface that provides everything a internet user could need. The browser allows users to customize the appearance of UI elements such as background color, overall theme, address bar and tab positioning, and start pages. Vivaldi features the ability to "stack" and "tile" tabs, annotate web pages, add notes to bookmarks and much more. Changes in Vivaldi 8.0.4033.42: [Chromium] Update to 148.0.7778.256 ESR [User Agent] Set Chromium version spoof to 149.0.7827.53 [Crash][Extensions] Using chrome.tabs.discard(…) (VB-126984) [Periodic Reload] Settings are not saved anymore (VB-128316) [Tabs] Stack names are lost after browser restart (VB-128321) [Themes] Vivaldi menu button no longer touches the upper left corner (VB-128124) Download: Vivaldi 64-bit | 139.0 MB (Freeware) Download: Vivaldi 32-bit | ARM64 View: Vivaldi Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Collaborator
      Asgardi earned a badge
      Collaborator
    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      PsYcHoKiLLa
      245
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      73
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!