MineCraft?


MineCraft  

331 members have voted

  1. 1. Do you know what MineCraft is?

  2. 2. (If you did) How did you hear about it?

  3. 3. Did you buy it? And do you enjoy it?

    • Yes, I did buy the Alpha and I enjoy it
    • No, I only play online for free on the classic version and I enjoy it
    • Yes I did buy the Alpha and I DO NOT enjoy it
    • No, I only play online for free on the classic version and I DO NOT enjoy it


Recommended Posts

It is? I never noticed it before but that could possibly be why my laptop lags on it every now and then....

EDIT: My mine is 122 blocks long, dropping down by 1 every 2 blocks (except for the last two as the very bottom of the mine is 4 blocks long) making it 60 blocks deep. As every section of 2 blocks long is dug out at 7 blocks high (including the lava ceiling) and 7 blocks wide, thats 60 sections that were 2x7x7 of removed material (excluding some missing stone), which comes to a total of nearly 6000 removed blocks of mostly stone. I would say its probably closer to 5500 due to some areas naturally missing stone that I did not have to dig out, but I also had to place a lot of stone (maybe around 500 total) and ~700 glass after digging everything out to get the ceiling the way I wanted it. Took 4 days but I finally got it done, now to actually make it functional by adding a minecart system, even in a cart under its own momentum (with me in it) it takes ~15 seconds to travel to the bottom....

Here is how effective lava lighting is (taken after I finished it the other day)....

Midway through looking at the entrance:

post-168771-12842388132288.jpg

Midway through looking at the bottom:

post-168771-12842388262404.jpg

Not a single torch inside the mineshaft at all. The only torches I have are on the outside of the mine lighting up the entrance a bit.

I also am no longer using that texture pack because, despite loving all but 2 textures, the lava and water are not animated so its almost impossible to tell where a water current is without letting the water drag you around....and with that texture pack, half-blocks of water (such as when the water flows a long distance without dropping down any blocks) show up as full blocks, so it can be hard to tell where the source of a water spring is.

Yeah, any texture pack that isn't the native res breaks animation.

I saw this one linked via somebody talking to Notch on twitter, it looks like nice and it's the native res, so it still animates.

http://painterlypack.net/

Using that now. This is very, very nice.

Using that now. This is very, very nice.

Yes, yes it is.....everything seems slightly darker, but it all looks so much better than default IMO. And the animation works so you can see the direction of water flows and what not.

I just finished building a reciprocating boat entrance to my mine. I dug the very bottom out some more, nearly filled it with lava (dug into a lava pit, barely saved it by filling the overflow with lava quickly), but found a good source of lava (removed 3 buckets from 1 square and it seemed like I could still remove more). Anyway, my boat entrance, it takes about 6 seconds to get down (you freefall in the boat down to the bottom of the mine) and about 7 seconds to get back to the top from the bottom, beats 15 seconds that my minecart takes either direction. Only problem is its far away from the mine entrance and I have nothing built around it yet (though that could change quickly), but its a quick way to the bottom of my mine or out of my mine for later expansion. I also added a minecart booster to my minecart (so I can get out from the bottom by minecart) into the side of the mine wall. Still want to improve my minecart system but I need to build out the bottom of the mine a bit so I have room to work.

Restarted my router. Added port rules to windows firewall and restarted server.

Link is the same.

http://www.minecraft.net/play.jsp?server=de25876d147d8cd28e7e4f97f1c7ee76

Playing under 'purches' only just noticed this thread on here. I play on another server mainly. If it gets up enough of a crowd here but I will set up a dedicated :)

I went on the server and I don't know what to do. :p What should I be doing for you multi-player people?

Edit: We so should have a Spleef arena! :D

Spleef is a competitive sport within Minecraft in which the goal is to be the last player standing. The name is a pun of the word grief.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!