• 0

Javascript - Determine length of text in pixels


Question

Hi all,

A while ago I had someone create a sliding bar effect for a website I was working on. If you check out the site linked below, you will see the sliding bar thingy that I am talking about where it says "Tona Boards" on a sort of green arrow, then it slides back and forth to reveal different text.

http://www.tonaboards.com/

Now there is just one small problem with it. There is always this unnecessary amount of extra space after the text if the line of text is quite long. This is a result of a poor calculation for the width of the arrow. Currently this is how the width of the arrow is calculated:

var width = titles[title_id][0].length * 15;

Basically, he is just multiplying the number of characters by 15 to get a close (but not accurate) pixel width that will fit the text.

Is there a better way to work out the exact amount of pixels a line of text takes up? I did some googling and it seems possible but I am a javascript noob and can't figure out how to incorporate any of the examples in to my particular code.

Here is the full javascript for the sliding arrow.

http://www.tonaboards.com/wp-content/themes/TonaLife/arrow.js

Cheers for any help.

Jordan

8 answers to this question

Recommended Posts

  • 0

You could try setting the tag holding the text as inline-block and check the width. Display block, float left is the other setting you could use to determine its width. I had to do this once to set the width on the fly for a menu that had to be centered at all times.

  • 0

Would I use something like this for determining the width?

var arrowlink = document.getElementByClass("arrow_link");

var width = arrowlink.style.width;

Like I said, I am a js noob. I tried this and it didn't work.

  • 0

Its easier to do it with jQuery. You could collect all the elements with a certain class loop through them, detect and store the width as below.

var $links = $('.arrow_links');

for(i=0; i<$links.length; i++){
       var $obj = $links.eq(i);
       var len = $obj.width();
       $obj.data('wden);
}

Now that the widths have been stored you can access at the time of animation. Like I mentioned earlier you will need to either set the display type to inline-block or a combo of display block and float left, whichever suits your circumstances.

  • 0

You could just wrap the text with a <span> and use jQuery's .width() method to get the width of that element.

JS:

$('h2 span').width());

HTML:

&lt;h2&gt;&lt;span&gt;Pellentesque habitant morbi tristique&lt;/span&gt;&lt;/h2&gt;

It should work :)

  • 0

The only problem I see with your implementation is that you need the width before adding the text in the DOM. Something like jQuery.width() will only work with elements inside the DOM, they need to be added on the page. Now, a solution to work around this would be to calculate all text widths beforehand, store the results and use those later. During the calculation, the texts can be appended to an element which is absolutely positioned outside the visible screen area. After all texts are measured, this element can be removed and the results can be used for the animations afterwards.

I see you're using MooTools for this script. I don't want to force you to convert to jQuery, but since you're working in a WordPress environment I believe you should choose jQuery for this. WordPress already loads jQuery for its own scripts (e.g. threaded comment reply form) and most WordPress plug-in developers tend to use jQuery as well. Also, it's best practice to stick with one JavaScript library and not mix them. (Although you could say WordPress is to blame here... perhaps this could be a valid exception.) If you're only going to use MooTools for its DOM capabilities and not use its OOP functionality, jQuery is the preferred library anyway.

Anyway, here's how you could implement text width calculation in jQuery:

jQuery(document).ready(function($) {
	// Title element structure: [ titleText, linkUrl, titleWidth ]
	var titles = [
		['Tona Boards', '', 0],
		['Check Out The New Driftwood Wakeskate', 'http://www.tonaboards.com/driftwood', 0],
		['Read The Driftwood Blog', 'http://www.tonaboards.com/blog', 0],
		['Learn More About TONA', 'http://www.tonaboards.com/130/wake-skate-project', 0]
	];

	// Create temporary element to test widths in
	var textdiv = $('&lt;div /&gt;').css({
		// position it off the page (in a land far, far away)
		position: absolute,
		left: -9999,
		top: -9999,
		// reset styles so that we only measure the text
                // if you need these to be added in your calculation, just remove these four lines and the comma on the previous line
		border: 0,
		margin: 0,
		padding: 0,
		outline: 0
	}).appendTo('#arrow_content'); // by appending to #arrow_content, we can inherit its font styling as well (yay!)
	// Loop through the titles array
	for(var i=0, len=titles.length; i &lt; len; ++i) {
		// Set text, retrieve width and store it (all on one line, thanks to chaining!)
		titles[i][2] = textdiv.html(titles[i][0]).width();
	}
	textdiv.remove(); // remove temporary element
	textdiv = null; // garbage collection for IE (don't know whether it really helps though...)

	/* ------------------------------ */

	// Now, whenever you need to animate your texts, use something like this:
	$('#arrow_content').width(0).animate({
		width: titles[i][2]	// make sure you got a valid i here!
	});
	// This would first set the width to 0px and then animate ('morph') to the calculated text width
});

Once again: if you prefer another library, feel free to replicate this in your desired library.

(On a side note, you're including MooTools twice in your <head> - better fix that :p)

  • 0

Thanks a lot Calculator. I would like to switch over to jQuery from MooTools (it was the guy who wrote the initial script that choose MooTools in the first place) so I will try out your code. Hopefully this works.

One question though, should your code work as is? I replaced my arrow.js with this and nothing is happening. Does the .animate part need to be expanded on before anything will happen?

  • 0

It looks like there's indeed a small error in my snippet above, the word absolute is meant to be a string value and should be wrapped in quotes, like so:

        // Create temporary element to test widths in
        var textdiv = $('&lt;div /&gt;').css({
                // position it off the page (in a land far, far away)
                position: 'absolute', // now with added quotes!
                left: -9999,
                top: -9999,

Basically, you want to start editing below the /* ----- */. Below that line, there's some example code of how you could start the animation, the reason why this doesn't work straight away is that the value of i is invalid there (after the loop, it will have exceeded the titles array index bounds). You can remove that and start recoding the rest of your script from there. First, you animate the arrow to the width of the first item in the titles array, then you set the link's text and href using the data from the title item and then you set a timeout to animate and set the next item after x seconds. This should be pretty straightforward in jQuery, have a look at the jQuery Docs and start experimenting! :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Similar to what started me on the path to switching to Linux... for the first 6mo of Win10 it was installing an AMD GPU driver that broke audio over HDMI which was essential to me. Driver from AMDs site was fine.
    • I have avoided many deer, a few moose, and other smaller animals during my years of driving and have managed just fine with only ABS and ESP, both of which can also be problematic depending on circumstance. I have never feared driving and I live in a rural area with a lot of deer and other animals. Winter or summer, heavy rain or sunshine, night or day, I always prefer and like to drive myself, and I drive constantly in my job. People die in accidents and they always will, that is a fact of life. Something like self-driving busses I can advocate for because they can be set to drive on static routes that always stay the same - i.e. those routes can be specially designed and maintained for them. I've already seen enough idiots doing random idiotic things with their Tesla autodrives that I would rather see them crash and burn because of their own stupidity instead of their "computer failing". I've also been a PC and tech enthusiast of over 25 years so I I'm fine with tech but I want to be the one who uses it, and decides how much of it I use. I also do not want it to make my hands, feet and brain obsolete. For me it's not really about if a computer can do it but about people not having to do things themselves (responsibly). I think that basic driving education should be done with a manual car and these "automatic only" cards should not exist (yes, I'm European and we drive a lot of manual cars, I even prefer them). If a person doesn't have enough coordination to manage a steering wheel, shitfer and pedals, how on Earth are they able to react to any unforseen situation on the road? And giving them autodrive doesn't make me feel any better if the person behind the wheel can't manage even basic driving themselves. One of the things I hate most in today's society (in general) is how pretty much everything that is considered even a bit dangerous is eliminated instead of educating people to assess risks and avoid problems themselves. Instead we make brains obsolete by building systems that do everything for us.
    • I know, I was just speaking about people in general.
    • I would say that's a purely subjective opinion, Phaseman.
  • Recent Achievements

    • One Month Later
      KynanSEIT earned a badge
      One Month Later
    • One Month Later
      gowtham07 earned a badge
      One Month Later
    • Collaborator
      lethalman went up a rank
      Collaborator
    • Week One Done
      Wayne Robinson earned a badge
      Week One Done
    • One Month Later
      Karan Khanna earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      681
    2. 2
      ATLien_0
      274
    3. 3
      Michael Scrip
      220
    4. 4
      +FloatingFatMan
      170
    5. 5
      Steven P.
      161
  • Tell a friend

    Love Neowin? Tell a friend!