Whats the status of your SSD?


Recommended Posts

Well that sucks!

<snip>

Surely a drive shouldn't be this poorly after just 18 months? Oh and as a side note, it still works perfectly. If I hadn't run that program I'd have thought it was in perfect condition :/

Depending on your warranty if it does die when it's estimated to (which I doubt) you should be able to get an RMA and get a brand new one. :p

I have only personally seen 2 SSDs fail early. Both of which were connected through an internal case (those 5 1/2" cases that fit 2.5" drives to hold them in place in full-sized towers). Both times, the core issue came down to the connection between the SSD, hot-swappable 5 1/2" bay, and the motherboard. The first one killed 3 drives (the original and 2 replacement drives, and it flat out killed them, they wouldn't work after removing them from the case) before I figured out the issue, the 3rd replacement drive worked fine and is still working to this day without trouble. The 2nd SSD was also in a similar casing, and it also died. Upon getting a replacement that didn't seem to be working properly, we removed it out of the 5 1/2" case and it works fine now.

In short, I have been dealing with SSDs for close to 2.5 years, and the only failures I have seen involved something other than the SSD going out. And that's with all Series 1 SSDs......you have an Agility which should technically last longer due to improvements in the tech.

Well that sucks!

Untitled.png

Surely a drive shouldn't be this poorly after just 18 months? Oh and as a side note, it still works perfectly. If I hadn't run that program I'd have thought it was in perfect condition :/

Oh and here are CrystalMark scores:

Untitled.png

Doesn't seem too bad for a drive probably considered 'Old' in SSD terms, never mind the health :p

Hmm, I see lots of other posts with people who have had them a year+ and far more life left. Do you write a lot of files to the ssd? Do you have scheduled defrag disabled?

Your speeds still look pretty good so I wouldn't worry. The percentage reported by the SSD doesn't necessarily mean its going to die as soon as it hits zero.

Whoa... after browsing this thread, it makes me think twice before buying an SSD :/ seriously

I think it just highlights good and bad ones, all the OCZ vertex and Intel's have been great with lifetimes till 2020ish

its the other brands and models that are failing, OCZ agility, kingston.

I'm now very glad that I was looking at the Vertex and Intel for my 1st SSD.

Depending on your warranty if it does die when it's estimated to (which I doubt) you should be able to get an RMA and get a brand new one. :p

I have only personally seen 2 SSDs fail early. Both of which were connected through an internal case (those 5 1/2" cases that fit 2.5" drives to hold them in place in full-sized towers). Both times, the core issue came down to the connection between the SSD, hot-swappable 5 1/2" bay, and the motherboard. The first one killed 3 drives (the original and 2 replacement drives, and it flat out killed them, they wouldn't work after removing them from the case) before I figured out the issue, the 3rd replacement drive worked fine and is still working to this day without trouble. The 2nd SSD was also in a similar casing, and it also died. Upon getting a replacement that didn't seem to be working properly, we removed it out of the 5 1/2" case and it works fine now.

In short, I have been dealing with SSDs for close to 2.5 years, and the only failures I have seen involved something other than the SSD going out. And that's with all Series 1 SSDs......you have an Agility which should technically last longer due to improvements in the tech.

Yeah I've got a fair bit of warranty left so I'm not too worried. When the performance begins to suffer that's when I'll worry :p

Hmm, I see lots of other posts with people who have had them a year+ and far more life left. Do you write a lot of files to the ssd? Do you have scheduled defrag disabled?

Your speeds still look pretty good so I wouldn't worry. The percentage reported by the SSD doesn't necessarily mean its going to die as soon as it hits zero.

Yeah It's a laptop so read/write amounts are pretty high. I'll give it a few months and see if it's got any worse and maybe try to RMA it (If necessary). If it kept its current performance till the end of its warranty I'd be more than pleased :)

Actually after 9 months of heavy use I still get the same speeds as on the first day:

-----------------------------------------------------------------------

CrystalDiskMark 3.0.1 x64 © 2007-2010 hiyohiyo

Crystal Dew World : http://crystalmark.info/

-----------------------------------------------------------------------

* MB/s = 1,000,000 byte/s [sATA/300 = 300,000,000 byte/s]

Sequential Read : 256.000 MB/s

Sequential Write : 109.500 MB/s

Random Read 512KB : 193.664 MB/s

Random Write 512KB : 103.888 MB/s

Random Read 4KB (QD=1) : 19.108 MB/s [ 4665.1 IOPS]

Random Write 4KB (QD=1) : 26.821 MB/s [ 6548.0 IOPS]

Random Read 4KB (QD=32) : 160.212 MB/s [ 39114.2 IOPS]

Random Write 4KB (QD=32) : 61.556 MB/s [ 15028.3 IOPS]

Test : 1000 MB [C: 55.0% (81.9/148.9 GB)] (x5)

Date : 2011/01/27 23:37:37

OS : Windows 7 Ultimate Edition [6.1 Build 7600] (x64)

Actually after 9 months of heavy use I still get the same speeds as on the first day:

-----------------------------------------------------------------------

CrystalDiskMark 3.0.1 x64 © 2007-2010 hiyohiyo

Crystal Dew World : http://crystalmark.info/

-----------------------------------------------------------------------

* MB/s = 1,000,000 byte/s [sATA/300 = 300,000,000 byte/s]

Sequential Read : 256.000 MB/s

Sequential Write : 109.500 MB/s

Random Read 512KB : 193.664 MB/s

Random Write 512KB : 103.888 MB/s

Random Read 4KB (QD=1) : 19.108 MB/s [ 4665.1 IOPS]

Random Write 4KB (QD=1) : 26.821 MB/s [ 6548.0 IOPS]

Random Read 4KB (QD=32) : 160.212 MB/s [ 39114.2 IOPS]

Random Write 4KB (QD=32) : 61.556 MB/s [ 15028.3 IOPS]

Test : 1000 MB [C: 55.0% (81.9/148.9 GB)] (x5)

Date : 2011/01/27 23:37:37

OS : Windows 7 Ultimate Edition [6.1 Build 7600] (x64)

nice what ssd do you have?

Aren't you suppose to leave 20% free space for your SSD?

Why buy a 64 GB drive if you can't use all of it? :p I mean yeh, maybe 3-4 GB is nice for temp. files, but 20% is a bit extensive.

Intel all the way. In the long-run, they seem to be the most reliable. G3 coming out soon.

Nope, the most stable one would be Samsung, I had 1 X25-M G2, 1 Kingston-branded X25-M G1 and 1 X25-E failing on me. Intel doesn't hold the record for having the most reliable SSD, Samsung does...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI will never be the jobs panacea some companies fantasize about today. Oracle is likely using it as an excuse, which we will see a lot of companies doing, I'm certain. They love their "plausible" excuses for their downturns. A couple of weeks ago my wife asked me to call Krogers about some discrepancy in a online grocery order, and it will be the last time either of us does that. I'll just do emails with humans from now on... The AI experience was horrible--the obviously recorded voice started asking a bunch of questions about our orders six months prior(!) and saying, "Is this in reference to your order on January 6, for $****?" You say "No!" and immediately the next question is "Is this in reference to your order on January 29th, for $****?" again, I answered "No!"--and it was incredible--on and on it went like that for fully 20 minutes until we finally got to the present, and only then was I put through to a human with authentic intelligence... I wondered why on Earth the idiot AI didn't start with the most recent orders and work back from there, as it was something anyone with a functioning brain would have done. And why didn't the AI have enough sense to ask me what the problem was in the first place? It didn't take too much deduction to understand that the goal of this "AI" was to cause the person on the phone to hang up in disgust, with no resolution of the problem. That begs another question: why pay for a tool-free problem line if the goal is to avoid solving your customer's problems?... Fortunately, Krogers does have real humans capable of reading an email and understanding it, and if she sees another situation in the future that's route she or I will take. The online grocery delivery service from Krogers has been great, over all, but their AI truly sucks.
    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      481
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      102
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!