Whats the status of your SSD?


Recommended Posts

Nope, the most stable one would be Samsung, I had 1 X25-M G2, 1 Kingston-branded X25-M G1 and 1 X25-E failing on me. Intel doesn't hold the record for having the most reliable SSD, Samsung does...

You had 3 SSDs failing on you? Now, that's what I call bad luck.

Nope, the most stable one would be Samsung, I had 1 X25-M G2, 1 Kingston-branded X25-M G1 and 1 X25-E failing on me. Intel doesn't hold the record for having the most reliable SSD, Samsung does...

Be interesting to see how a Samsung SSD does on this test, nobody has posted one yet...anyone got a Samsung?....

Be interesting to see how a Samsung SSD does on this test, nobody has posted one yet...anyone got a Samsung?....

Here you go:

Samsung 64GB SLC SATA II (MCCO*) installed on my X61 tablet. I bought it in 2007 and it is still running strong.

Next one is Samsung 256GB PB22J installed in my desktop (bought it in 2009).

The next one is Intel G1 80GB installed in my X200 tablet (bought it in 2009).

The last one is the most recent Kingston-branded G2 80GB installed in my X201 (I sent in my G1 to Kingston for repair and they sent me back this one in 2010).

post-120462-0-11707400-1296222088.png

post-120462-0-49471700-1296222104.png

post-120462-0-74047900-1296222191.png

post-120462-0-88966000-1296222226.png

Here you go:

Samsung 64GB SLC SATA II (MCCO*) installed on my X61 tablet. I bought it in 2007 and it is still running strong.

Next one is Samsung 256GB PB22J installed in my desktop (bought it in 2009).

The next one is Intel G1 80GB installed in my X200 tablet (bought it in 2009).

The last one is the most recent Kingston-branded G2 80GB installed in my X201 (I sent in my G1 to Kingston for repair and they sent me back this one in 2010).

Shame you Haven't run the 3rd (Intel G1) one as long as the Samsungs, would have made for a good comparison, the Intel G1 has had as many power ons but not as much run time, tho I'd say it probably still looks best out of the 4.

I don't know if power ons or run time do more damage...

I don't know if power ons or run time do more damage...

Neither should do much in terms of the SSD lifetime unless the PSU is surging during power up.

It's usually the number of write cycles that can do it, each flash cell has a finite number of write cycles it can sustain.

I think it's that drives that use SLC flash rather than MLC can sustain a higher number of write cycles but I might be wrong.

Shame you Haven't run the 3rd (Intel G1) one as long as the Samsungs, would have made for a good comparison, the Intel G1 has had as many power ons but not as much run time, tho I'd say it probably still looks best out of the 4.

I don't know if power ons or run time do more damage...

I bought the 2 x Intel G1 later than the Samsung 64GB and one of them craps out first. What does it tell you ? Intel SSD is not reliable...

Neither should do much in terms of the SSD lifetime unless the PSU is surging during power up.

It's usually the number of write cycles that can do it, each flash cell has a finite number of write cycles it can sustain.

I think it's that drives that use SLC flash rather than MLC can sustain a higher number of write cycles but I might be wrong.

But the SLC has a very early-stage controller so the write-leveling is not as good. Also the Intel one craps out because of the controller ... You can do all these flashy MTBF calculation but it is usually the controller that fails before the flash ...

I bought the 2 x Intel G1 later than the Samsung 64GB and one of them craps out first. What does it tell you ? Intel SSD is not reliable...

It tells me that you were very unlucky with drives.

apart from your I havn't heard of many problems with intel drives, and most of the posts in the thread have been for Intels, all so far good.

Not saying Samsung is bad, we use them at work for some very high end kit.

but I think you've just had bad luck with the Intels.

But the SLC has a very early-stage controller so the write-leveling is not as good. Also the Intel one craps out because of the controller ... You can do all these flashy MTBF calculation but it is usually the controller that fails before the flash ...

Yeah that doesn't surprise me, what controllers do the Samsungs have? indilinx or sandforce?

It tells me that you were very unlucky with drives.

apart from your I havn't heard of many problems with intel drives, and most of the posts in the thread have been for Intels, all so far good.

Not saying Samsung is bad, we use them at work for some very high end kit.

but I think you've just had bad luck with the Intels.

Yeah that doesn't surprise me, what controllers do the Samsungs have? indilinx or sandforce?

No, Samsung develops its own controllers. It is actually quite good, even for the 1st generation...

Whoa... after browsing this thread, it makes me think twice before buying an SSD :/ seriously

ive been using my 30GB OCZ Vertex for nearly 2 years and it's fine. However, i just had TWO Hitachi 1TB hd's die on me in a single month. both were <1.5yrs old.

This one has only been in the computer I did the reading on for just over four months. It started out back in Nov 2009 in my laptop (laptop went away), however, the SSD got transferred into my HP. So the use time is probably closer to eight months (actual use).

No, Samsung develops its own controllers. It is actually quite good, even for the 1st generation...

Ah ok, I'll look into them, should be getting a bonus in Feb pay packet so I think it'll go on the SSD and a new graphics card. :D
  • 2 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • So the card is targeted at headphone users - so the review should be from someone that uses this - maybe I can review a card next time.
    • I have a older F4-210 NAS, it is pretty basic, the CPU is not the fastest by a long way and only 1GB of ram, but it works fine. I don't understand the need for A.I in a NAS. It seems like A.i is being shoved into everything, if we like it or not. i will stick to my old Terramsater NAS, thankfully the OS is not being updated. Also, got myself a small NAs built using a Raspberry Pi 5. iy usesd less energy, so stays on all the time. As for the unit above, if it is as reliable as my old Terramaster Nas, then it will be a good unit.
    • Gemini in Google Sheets can now help you debug and fix formula errors by David Uzondu Google has started rolling out an update to Gemini in Google Sheets that allows the AI to diagnose and fix formula errors in one click, as long as your Workspace admin has Gemini for Workspace in Sheets turned on. According to Google, the new feature can handle pretty much everything from basic arithmetic to very complex calculations. This ability to debug formula errors comes about two years after Google introduced basic formula generation with Gemini in Sheets. To create a formula with Gemini in Sheets, you open a spreadsheet on your computer and click Ask Gemini in the top right corner. You can also enter an equals sign in any cell and use a shortcut like Ctrl + Alt + G on Windows and Chrome OS, or Command + Ctrl + G on macOS. Once you open the side panel, you write a natural language prompt using your sheet references. For example, you can ask Gemini to divide goals by games, or to find cell C1 in range D:G. If for some reason, the formula Gemini generated doesn't work, or maybe you wrote the formula yourself, you can troubleshoot the issue directly inside the grid. When a cell shows an error message, you hover over it and click "Fix". This action opens the side panel where Gemini analyzes the data structure and automatically applies the fixes when they are ready. You can cancel the process at any time by clicking stop in the side panel. Image via Google Google has been pushing its Gemini integration in Google Sheets for a while now, steadily moving AI features from side panels directly into user spreadsheets. Last year, the Mountain View giant shipped an =AI() Function in Sheets that allowed users to run translation and text generation directly inside cells instead of using the side panel interface. Earlier this year, the company announced that Gemini in Sheets had reached near-human expert performance, achieving a 70.48% success rate on the SpreadsheetBench dataset.
    • I get what you are saying, If i go onto the Instagram site, it says log in with Facebook, but they are not allowed to link my account with Instagram until I do that. Maybe in the U.S, they can link them, but Privacy is not a thing in the U.S. the way things are going,l won;t be any better in the U.K.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!