Whats the status of your SSD?


Recommended Posts

An honest question is why does this thread exists? Is they any proof that the numbers reported by SMART and this tool are reliable?

I certainly hope not!

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011 (when I originally posted the following results in this topic)

SSD was 4 months old

Health was 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

mine been 70% out of box with 0 hours

and it's still 70% (obviously this app do not support this samsung ssd)

http://online.hddlif...fa150a940922a98

but those unknown samsung smart parameters

EB

March 2011 (194 hours) : 7

September 2011 (5254 hours): 9

EC

March 2011 (194 hours) : 2

September 2011 (5254 hours): 55

ED

March 2011 (194 hours) : 15

September 2011 (5254 hours): 207

EE

March 2011 (194 hours) : 1196

September 2011 (5254 hours): 1196

I am sure the attraction to SSDs isn't their reliability, but their speed. I am not questioning the attraction to SSDs, but merely this topic. The point of posting reliability estimates would be to challenge those who see SSDs as less reliable than HDDs, otherwise why do it?

I have had more flash media die on me than anything other than Floppy Disks in my 13 years using PCs. This makes me wonder about the reliability of SSDs. As a result, looking at this thread aims to counter that, but offers nothing in the way of proof. I can find many people who are still running HDDs from over 5 years ago. A matter of fact, I have ones nearing 10 years old in use right now and they are still spinning fine. That doesn't mean HDDs never die. But if I told you my HDDs was going to last me another "3 years, 2 months, and 9 days" I should be showing why that number is so accurate and isn't just pulled out of someone backside.

Again, this isn't an attack on SSDs, but an inquiring as to what the point of posting the "status" of your SSD if the status is hogwash.

You make it sound like this program is randomly generating a date. You do realize that all drives (HHD or SSD) have a read/write rating of some sort, right? The manufacturers do actually test their product before they throw it out on the market, so they know exactly the amount of usage that an average user should get. So would you like to take a guess at how this program calculates that date?

Like I said before, both sides will obviously have failures. Shock, static charge, voltage spikes, temperature, etc. would all play a factor in the life of a drive. I don't have any proof to back this, but maybe SSD's are more commonly used in laptops since the majority of them come in the 2.5" form factor. If there's any truth to that, then obviously it would be prone to more outside forces. But if you put a SSD and HDD next to each other, in the same environment, and read/write the hell out of it, I'm willing to bet the SSD wins.

You make it sound like this program is randomly generating a date. You do realize that all drives (HHD or SSD) have a read/write rating of some sort, right? The manufacturers do actually test their product before they throw it out on the market, so they know exactly the amount of usage that an average user should get. So would you like to take a guess at how this program calculates that date?

Like I said before, both sides will obviously have failures. Shock, static charge, voltage spikes, temperature, etc. would all play a factor in the life of a drive. I don't have any proof to back this, but maybe SSD's are more commonly used in laptops since the majority of them come in the 2.5" form factor. If there's any truth to that, then obviously it would be prone to more outside forces. But if you put a SSD and HDD next to each other, in the same environment, and read/write the hell out of it, I'm willing to bet the SSD wins.

It seems the program does pull its number out of thin air, so to speak.

Thanks to the link in Coth's post I was able to get a little insight into how the program generates its life date:

It's a simple mathematical problem: in order to calculate it at once, we need to know at least the date when you wrote data to the drive the first time, but unfortunately, drives do not provide this information. That is why we need some time after the first launch of SSDLife to monitor how intensively you use your SSD in order to determine its average load. And as soon as we can calculate the approximate average amount of data written to the drive per day, we will be able to determine the time it will take you to use the entire lifetime capacity of the drive, which means we will be able to calculate the date when the lifetime of the SSD will be over. Of course, this date will keep changing depending on how the intensity of the drive usage changes.

Source: http://ssd-life.com/eng/how.html

So the program seems to be of dubious value. It is only able to guess that your drive will last x days based on how many writes it is supposed to handle and how often it thinks you write to the drive. It can't read real wear on the drive or report any underlying problems with the drive that aren't detected by SMART. And we all know how useful SMART is...

It seems the program does pull its number out of thin air, so to speak.

Thanks to the link in Coth's post I was able to get a little insight into how the program generates its life date:

Source: http://ssd-life.com/eng/how.html

So the program seems to be of dubious value. It is only able to guess that your drive will last x days based on how many writes it is supposed to handle and how often it thinks you write to the drive. It can't read real wear on the drive or report any underlying problems with the drive that aren't detected by SMART. And we all know how useful SMART is...

Did you not read my post?... Thanks for basically re-emphasizing what I said...

And no, it does not pull the date out of thin air. It's an educated prediction just like any other prediction/forecast in the world. Did you honestly think that this program could magically predict the exact day your drive will die?

A drive is rated for a certain amount of read/writes. It will keep record of your usage over time and then that program will build a prediction using it's algorithm. It's common sense that it will change over time since sometimes it will be running for a month straight and sometimes it will be off for a week. The program is still correct for the usage you've put on thus far. It's not like a prediction is a bad thing...

In the end, there have been plenty of people on here that have used their SSD's for a long time and the program still says they have years and years of life left. If somebody only has a few hours put on it, then yeah it's not exactly valid, but that's definitely not the case here. The proof is all contained in this thread. You can believe what you want, but saying it's wrong is just non-sense.

Did you not read my post?... Thanks for basically re-emphasizing what I said...

And no, it does not pull the date out of thin air. It's an educated prediction just like any other prediction/forecast in the world. Did you honestly think that this program could magically predict the exact day your drive will die?

A drive is rated for a certain amount of read/writes. It will keep record of your usage over time and then that program will build a prediction using it's algorithm. It's common sense that it will change over time since sometimes it will be running for a month straight and sometimes it will be off for a week. The program is still correct for the usage you've put on thus far. It's not like a prediction is a bad thing...

In the end, there have been plenty of people on here that have used their SSD's for a long time and the program still says they have years and years of life left. If somebody only has a few hours put on it, then yeah it's not exactly valid, but that's definitely not the case here. The proof is all contained in this thread. You can believe what you want, but saying it's wrong is just non-sense.

It is a very poor guess* as the program needs to run from Day 1 until the end to give a decent estimate, but even then it isn't guessing on anything more than estimated write capability from the drive maker. So it is really guessing how many estimated writes your drive has left not its "health".

That was my issue. If you look at the screenshots it implies that this product is able to read deeply into the SSD health and give an accurate estimate of how long it would last. That isn't the case. For even the one area it does monitor, wear level, there is no proof that their algorithm is even close to accurate.

* Poor guess as there is a lot of write activity it could miss due to formats, dual booting, virtual machines using hardware I/O virtualization, or any other scenario where this program can't record even write.

It is a very poor guess* as the program needs to run from Day 1 until the end to give a decent estimate, but even then it isn't guessing on anything more than estimated write capability from the drive maker. So it is really guessing how many estimated writes your drive has left not its "health".

That was my issue. If you look at the screenshots it implies that this product is able to read deeply into the SSD health and give an accurate estimate of how long it would last. That isn't the case. For even the one area it does monitor, wear level, there is no proof that their algorithm is even close to accurate.

* Poor guess as there is a lot of write activity it could miss due to formats, dual booting, virtual machines using hardware I/O virtualization, or any other scenario where this program can't record even write.

Why would the program need to run from day 1? I think you are really mistaken on how this program (and an SSD) works. The SSD itself is recording everything it does. All this program does is interpret that back-log and calculate a date for you.

There is no such thing as "wear" on an SSD. There are no mechanical parts, so the only thing that resembles "wear" is the completed read/write cycles.

That program truly is spot on since the SSD will die as soon as you use up those read/write cycles. That's just the physical nature of NAND memory. On the contrary, a mechanical HDD dies when the headers break or some other component fails. It's hard to predict the death of an HDD because it can still function as it goes "down hill". Whereas an SSD doesn't show symptoms; it just dies.

You should probably read their website to clear up your thoughts:

http://ssd-life.com/eng/how.html

Why would the program need to run from day 1? I think you are really mistaken on how this program (and an SSD) works. The SSD itself is recording everything it does. All this program does is interpret that back-log and calculate a date for you.

There is no such thing as "wear" on an SSD. There are no mechanical parts, so the only thing that resembles "wear" is the completed read/write cycles.

That program truly is spot on since the SSD will die as soon as you use up those read/write cycles. That's just the physical nature of NAND memory. On the contrary, a mechanical HDD dies when the headers break or some other component fails. It's hard to predict the death of an HDD because it can still function as it goes "down hill". Whereas an SSD doesn't show symptoms; it just dies.

You should probably read their website to clear up your thoughts:

http://ssd-life.com/eng/how.html

I'm not sure I understand what you're saying...

Using the SSD (write cycles) causes wear on the drive. Every time you write to the drive you wear it out just a little more... They don't wear the same way mechanical HDDs do, but they wear nonetheless.

No, the program is not "spot on". I quoted their site earlier where they stated the drive only shows how many writes it has had at the moment they request it. The drive doesn't tell them when the first write occurred or how long it has been in use (so they have no way of knowing if the 45% "wear" on the drive occurred in 1 day or 10 years). They also admit that without this data their result is nothing more than an educated guess and can fluctuate as a result.

And as I said earlier, it only shows the drive's wear level really. It isn't representative of the drive's overall health as the screenshots imply.

I'm not sure I understand what you're saying...

Using the SSD (write cycles) causes wear on the drive. Every time you write to the drive you wear it out just a little more... They don't wear the same way mechanical HDDs do, but they wear nonetheless.

No, the program is not "spot on". I quoted their site earlier where they stated the drive only shows how many writes it has had at the moment they request it. The drive doesn't tell them when the first write occurred or how long it has been in use (so they have no way of knowing if the 45% "wear" on the drive occurred in 1 day or 10 years). They also admit that without this data their result is nothing more than an educated guess and can fluctuate as a result.

And as I said earlier, it only shows the drive's wear level really. It isn't representative of the drive's overall health as the screenshots imply.

Then how does the program display "Work Time"? I highly doubt that all these people have run this program before this thread was created. By your logic, everybody's work time would be 0 days in their screenshots. An SSD stores a log of what it does along with a time stamp. The program is only doing a simple calculation based on what it reads from the SSD. Nothing more, nothing less.

You still don't understand that with an SSD, health and wear level are the same thing. That is dictated by the read/write cycles, and that's it. It's very very simple.

You just need to look past your knowledge of how a mechanical HDD works, because the two are very different.

I just recently put an order in for an OCZ 120GB Vertex 3. Should be $180 after rebate.

Hope I don't regret it :/

I have that same one and it's blazing fast. I believe it's still the best rated SSD by a pretty large margin.

Be sure to update it to the latest firmware if possible. Sometimes it helps with stability and such.

  • 5 weeks later...

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011

SSD is 4 months old

Health is 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

November 2011

SSD is 14 months old

Health is 56%

Work time: 6 months, 28 days

Powered on: 709 times

"Your drive health is in good condition and according to current use, estimated lifetime is June 2020."

Just noticed that the new Intel SSD toolbox has its own drive life estimate.

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011

SSD is 4 months old

Health is 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

November 2011

SSD is 14 months old

Health is 56%

Work time: 6 months, 28 days

Powered on: 709 times

"Your drive health is in good condition and according to current use, estimated lifetime is June 2020."

that seems like awfully quick wear =S

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011

SSD is 4 months old

Health is 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

November 2011

SSD is 14 months old

Health is 56%

Work time: 6 months, 28 days

Powered on: 709 times

"Your drive health is in good condition and according to current use, estimated lifetime is June 2020."

Theres something wrong with that drive..

Heres mine.....

Intel SSDSA2M080G2GC (Fw: 2CV102M3)

Total/free size: 80.0GB / 8.3GB

Work time: 8591 hours (11 months, 27 days, 23 hours)

Powered on: 124 times

Trime: supported, enabled

Health: 99%

Estimated lifetime: 8 Years, 8 months, 9 days

(T.E.C. date - July 24, 2020)

Data writen, GB: 3254.4

http://online.hddlif...21d01151899001a

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How can it beat a Steam machine without a serious GPU? The two CU iGPU only provides about 5fps in gaming. That's not going to make any gamer happy.
    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!