Whats the status of your SSD?


Recommended Posts

An honest question is why does this thread exists? Is they any proof that the numbers reported by SMART and this tool are reliable?

I certainly hope not!

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011 (when I originally posted the following results in this topic)

SSD was 4 months old

Health was 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

mine been 70% out of box with 0 hours

and it's still 70% (obviously this app do not support this samsung ssd)

http://online.hddlif...fa150a940922a98

but those unknown samsung smart parameters

EB

March 2011 (194 hours) : 7

September 2011 (5254 hours): 9

EC

March 2011 (194 hours) : 2

September 2011 (5254 hours): 55

ED

March 2011 (194 hours) : 15

September 2011 (5254 hours): 207

EE

March 2011 (194 hours) : 1196

September 2011 (5254 hours): 1196

I am sure the attraction to SSDs isn't their reliability, but their speed. I am not questioning the attraction to SSDs, but merely this topic. The point of posting reliability estimates would be to challenge those who see SSDs as less reliable than HDDs, otherwise why do it?

I have had more flash media die on me than anything other than Floppy Disks in my 13 years using PCs. This makes me wonder about the reliability of SSDs. As a result, looking at this thread aims to counter that, but offers nothing in the way of proof. I can find many people who are still running HDDs from over 5 years ago. A matter of fact, I have ones nearing 10 years old in use right now and they are still spinning fine. That doesn't mean HDDs never die. But if I told you my HDDs was going to last me another "3 years, 2 months, and 9 days" I should be showing why that number is so accurate and isn't just pulled out of someone backside.

Again, this isn't an attack on SSDs, but an inquiring as to what the point of posting the "status" of your SSD if the status is hogwash.

You make it sound like this program is randomly generating a date. You do realize that all drives (HHD or SSD) have a read/write rating of some sort, right? The manufacturers do actually test their product before they throw it out on the market, so they know exactly the amount of usage that an average user should get. So would you like to take a guess at how this program calculates that date?

Like I said before, both sides will obviously have failures. Shock, static charge, voltage spikes, temperature, etc. would all play a factor in the life of a drive. I don't have any proof to back this, but maybe SSD's are more commonly used in laptops since the majority of them come in the 2.5" form factor. If there's any truth to that, then obviously it would be prone to more outside forces. But if you put a SSD and HDD next to each other, in the same environment, and read/write the hell out of it, I'm willing to bet the SSD wins.

You make it sound like this program is randomly generating a date. You do realize that all drives (HHD or SSD) have a read/write rating of some sort, right? The manufacturers do actually test their product before they throw it out on the market, so they know exactly the amount of usage that an average user should get. So would you like to take a guess at how this program calculates that date?

Like I said before, both sides will obviously have failures. Shock, static charge, voltage spikes, temperature, etc. would all play a factor in the life of a drive. I don't have any proof to back this, but maybe SSD's are more commonly used in laptops since the majority of them come in the 2.5" form factor. If there's any truth to that, then obviously it would be prone to more outside forces. But if you put a SSD and HDD next to each other, in the same environment, and read/write the hell out of it, I'm willing to bet the SSD wins.

It seems the program does pull its number out of thin air, so to speak.

Thanks to the link in Coth's post I was able to get a little insight into how the program generates its life date:

It's a simple mathematical problem: in order to calculate it at once, we need to know at least the date when you wrote data to the drive the first time, but unfortunately, drives do not provide this information. That is why we need some time after the first launch of SSDLife to monitor how intensively you use your SSD in order to determine its average load. And as soon as we can calculate the approximate average amount of data written to the drive per day, we will be able to determine the time it will take you to use the entire lifetime capacity of the drive, which means we will be able to calculate the date when the lifetime of the SSD will be over. Of course, this date will keep changing depending on how the intensity of the drive usage changes.

Source: http://ssd-life.com/eng/how.html

So the program seems to be of dubious value. It is only able to guess that your drive will last x days based on how many writes it is supposed to handle and how often it thinks you write to the drive. It can't read real wear on the drive or report any underlying problems with the drive that aren't detected by SMART. And we all know how useful SMART is...

It seems the program does pull its number out of thin air, so to speak.

Thanks to the link in Coth's post I was able to get a little insight into how the program generates its life date:

Source: http://ssd-life.com/eng/how.html

So the program seems to be of dubious value. It is only able to guess that your drive will last x days based on how many writes it is supposed to handle and how often it thinks you write to the drive. It can't read real wear on the drive or report any underlying problems with the drive that aren't detected by SMART. And we all know how useful SMART is...

Did you not read my post?... Thanks for basically re-emphasizing what I said...

And no, it does not pull the date out of thin air. It's an educated prediction just like any other prediction/forecast in the world. Did you honestly think that this program could magically predict the exact day your drive will die?

A drive is rated for a certain amount of read/writes. It will keep record of your usage over time and then that program will build a prediction using it's algorithm. It's common sense that it will change over time since sometimes it will be running for a month straight and sometimes it will be off for a week. The program is still correct for the usage you've put on thus far. It's not like a prediction is a bad thing...

In the end, there have been plenty of people on here that have used their SSD's for a long time and the program still says they have years and years of life left. If somebody only has a few hours put on it, then yeah it's not exactly valid, but that's definitely not the case here. The proof is all contained in this thread. You can believe what you want, but saying it's wrong is just non-sense.

Did you not read my post?... Thanks for basically re-emphasizing what I said...

And no, it does not pull the date out of thin air. It's an educated prediction just like any other prediction/forecast in the world. Did you honestly think that this program could magically predict the exact day your drive will die?

A drive is rated for a certain amount of read/writes. It will keep record of your usage over time and then that program will build a prediction using it's algorithm. It's common sense that it will change over time since sometimes it will be running for a month straight and sometimes it will be off for a week. The program is still correct for the usage you've put on thus far. It's not like a prediction is a bad thing...

In the end, there have been plenty of people on here that have used their SSD's for a long time and the program still says they have years and years of life left. If somebody only has a few hours put on it, then yeah it's not exactly valid, but that's definitely not the case here. The proof is all contained in this thread. You can believe what you want, but saying it's wrong is just non-sense.

It is a very poor guess* as the program needs to run from Day 1 until the end to give a decent estimate, but even then it isn't guessing on anything more than estimated write capability from the drive maker. So it is really guessing how many estimated writes your drive has left not its "health".

That was my issue. If you look at the screenshots it implies that this product is able to read deeply into the SSD health and give an accurate estimate of how long it would last. That isn't the case. For even the one area it does monitor, wear level, there is no proof that their algorithm is even close to accurate.

* Poor guess as there is a lot of write activity it could miss due to formats, dual booting, virtual machines using hardware I/O virtualization, or any other scenario where this program can't record even write.

It is a very poor guess* as the program needs to run from Day 1 until the end to give a decent estimate, but even then it isn't guessing on anything more than estimated write capability from the drive maker. So it is really guessing how many estimated writes your drive has left not its "health".

That was my issue. If you look at the screenshots it implies that this product is able to read deeply into the SSD health and give an accurate estimate of how long it would last. That isn't the case. For even the one area it does monitor, wear level, there is no proof that their algorithm is even close to accurate.

* Poor guess as there is a lot of write activity it could miss due to formats, dual booting, virtual machines using hardware I/O virtualization, or any other scenario where this program can't record even write.

Why would the program need to run from day 1? I think you are really mistaken on how this program (and an SSD) works. The SSD itself is recording everything it does. All this program does is interpret that back-log and calculate a date for you.

There is no such thing as "wear" on an SSD. There are no mechanical parts, so the only thing that resembles "wear" is the completed read/write cycles.

That program truly is spot on since the SSD will die as soon as you use up those read/write cycles. That's just the physical nature of NAND memory. On the contrary, a mechanical HDD dies when the headers break or some other component fails. It's hard to predict the death of an HDD because it can still function as it goes "down hill". Whereas an SSD doesn't show symptoms; it just dies.

You should probably read their website to clear up your thoughts:

http://ssd-life.com/eng/how.html

Why would the program need to run from day 1? I think you are really mistaken on how this program (and an SSD) works. The SSD itself is recording everything it does. All this program does is interpret that back-log and calculate a date for you.

There is no such thing as "wear" on an SSD. There are no mechanical parts, so the only thing that resembles "wear" is the completed read/write cycles.

That program truly is spot on since the SSD will die as soon as you use up those read/write cycles. That's just the physical nature of NAND memory. On the contrary, a mechanical HDD dies when the headers break or some other component fails. It's hard to predict the death of an HDD because it can still function as it goes "down hill". Whereas an SSD doesn't show symptoms; it just dies.

You should probably read their website to clear up your thoughts:

http://ssd-life.com/eng/how.html

I'm not sure I understand what you're saying...

Using the SSD (write cycles) causes wear on the drive. Every time you write to the drive you wear it out just a little more... They don't wear the same way mechanical HDDs do, but they wear nonetheless.

No, the program is not "spot on". I quoted their site earlier where they stated the drive only shows how many writes it has had at the moment they request it. The drive doesn't tell them when the first write occurred or how long it has been in use (so they have no way of knowing if the 45% "wear" on the drive occurred in 1 day or 10 years). They also admit that without this data their result is nothing more than an educated guess and can fluctuate as a result.

And as I said earlier, it only shows the drive's wear level really. It isn't representative of the drive's overall health as the screenshots imply.

I'm not sure I understand what you're saying...

Using the SSD (write cycles) causes wear on the drive. Every time you write to the drive you wear it out just a little more... They don't wear the same way mechanical HDDs do, but they wear nonetheless.

No, the program is not "spot on". I quoted their site earlier where they stated the drive only shows how many writes it has had at the moment they request it. The drive doesn't tell them when the first write occurred or how long it has been in use (so they have no way of knowing if the 45% "wear" on the drive occurred in 1 day or 10 years). They also admit that without this data their result is nothing more than an educated guess and can fluctuate as a result.

And as I said earlier, it only shows the drive's wear level really. It isn't representative of the drive's overall health as the screenshots imply.

Then how does the program display "Work Time"? I highly doubt that all these people have run this program before this thread was created. By your logic, everybody's work time would be 0 days in their screenshots. An SSD stores a log of what it does along with a time stamp. The program is only doing a simple calculation based on what it reads from the SSD. Nothing more, nothing less.

You still don't understand that with an SSD, health and wear level are the same thing. That is dictated by the read/write cycles, and that's it. It's very very simple.

You just need to look past your knowledge of how a mechanical HDD works, because the two are very different.

I just recently put an order in for an OCZ 120GB Vertex 3. Should be $180 after rebate.

Hope I don't regret it :/

I have that same one and it's blazing fast. I believe it's still the best rated SSD by a pretty large margin.

Be sure to update it to the latest firmware if possible. Sometimes it helps with stability and such.

  • 5 weeks later...

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011

SSD is 4 months old

Health is 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

November 2011

SSD is 14 months old

Health is 56%

Work time: 6 months, 28 days

Powered on: 709 times

"Your drive health is in good condition and according to current use, estimated lifetime is June 2020."

Just noticed that the new Intel SSD toolbox has its own drive life estimate.

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011

SSD is 4 months old

Health is 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

November 2011

SSD is 14 months old

Health is 56%

Work time: 6 months, 28 days

Powered on: 709 times

"Your drive health is in good condition and according to current use, estimated lifetime is June 2020."

that seems like awfully quick wear =S

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011

SSD is 4 months old

Health is 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

"Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

October 2011

SSD is 13 months old

Health is 59%

Work time: 6 months, 15 days

Powered on: 646 times

"Your drive health is in good condition and according to current use, estimated lifetime is April 2020."

November 2011

SSD is 14 months old

Health is 56%

Work time: 6 months, 28 days

Powered on: 709 times

"Your drive health is in good condition and according to current use, estimated lifetime is June 2020."

Theres something wrong with that drive..

Heres mine.....

Intel SSDSA2M080G2GC (Fw: 2CV102M3)

Total/free size: 80.0GB / 8.3GB

Work time: 8591 hours (11 months, 27 days, 23 hours)

Powered on: 124 times

Trime: supported, enabled

Health: 99%

Estimated lifetime: 8 Years, 8 months, 9 days

(T.E.C. date - July 24, 2020)

Data writen, GB: 3254.4

http://online.hddlif...21d01151899001a

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy —was $28 now FREE by Steven Parker Claim your complimentary copy (worth $28) of "How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy" for free, before the offer ends on June 30. Description In today’s workplace, headlines about artificial intelligence can feel overwhelming. With headlines swinging between promises of utopia and warnings of mass unemployment, for most knowledge workers, the truth feels unclear. In this book, Sharon Gai cuts through the noise. Drawing from real-world examples and global insights, she explains how AI is reshaping the way we work—without hype or fearmongering. Instead of choosing between blind optimism or outright pessimism, she offers a practical, balanced perspective that helps readers make sense of the rapidly evolving AI landscape. You’ll learn how to: Reskill and future-proof your career in the face of AI disruption Identify which parts of your role can be automated, and which require human creativity and judgment Use proven frameworks to evaluate AI’s impact on your work and your organization Apply actionable tips and tools to boost productivity, make smarter decisions, and do more with less Gain clarity as a parent, leader, or professional navigating what this means for the next generation Whether you’re an employee anxious about your future, a parent concerned about your children’s opportunities, or a leader managing a lean team with tight budgets, this book provides the strategies and mindset you need to adapt so you can stop worrying and start preparing. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. Was $28, but is now FREE | Below free offer link expires on June 30. How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy The below offers are also available for free in exchange for your (work) email: The Vibe Coding Playbook: Building Your Tech Business with AI ($35 Value) FREE - Expires 6/23 The Persuasion Engine: How Any Business Can Use AI-Powered Neuromarketing to Understand and Win Customers ($28 Value) FREE - Expires 6/24 How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy ($28 Value) FREE - Expires 6/30 Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms ($131.95 Value) FREE - Expires 7/1 The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) FREE How to Build an AI Design Workflow with Gamma ($21 Value) FREE The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!