new Canon T3i / 600D


Recommended Posts

Canon has unveiled the Rebel T3i (EOS 600D) upper entry-level DSLR. It continues to use the 18MP CMOS sensor seen in the Rebel T2i (550D) but gains a tilt and swivel 1,040k dot LCD monitor like the one offered on the more expensive 60D. It also gains the ability to remotely control flashguns using its internal flash, a feature previously only featured on higher-end models. Alongside the camera, Canon is also launching the 18-55mm F3.5-5.6 IS II, a cosmetically revised version of its optically stabilized kit lens. We've had a chance to use pre-production versions of both and have prepared a Hands-On Preview of the EOS 600D including beta samples gallery.

18-megapixel CMOS sensor

Scene Intelligent Auto mode

Full-HD EOS Movie

On-screen Feature Guide

3.7fps continuous shooting

Wide-area 9-point AF

1,040k-dot vari-angle 7.7cm (3.0”) screen

Basic+ and Creative Filters

Built-in wireless flash control

Announcement/source: http://www.dpreview.com/news/1102/11020720canoneos600d.asp

DPreview Handson: http://www.dpreview.com/previews/canoneos600d/

I know a lot of users on here are often looking at entry level cameras.

Controlling flash through the pop up on an entry level camera? I hope Nikon's own sake they include that on their D5000 replacement.

Link to comment
https://www.neowin.net/forum/topic/973928-new-canon-t3i-600d/
Share on other sites

the bigger slap in the face is that Canon comes out with a swivel screen for the T3i and expects the consumer to pay 200$ more for a camera which is the exactly same as the T2i except for the swivel screen. I know 3 people who are sticking with the T2i because T3i is not worth it. They said it would be better to upgrade to the 60D than the T3i because it will be cheaper

How does the controlling of external flashes using the pop-up one work? :s

Basically, it's like an optical cable, only it goes through the air.

The flash units, Nikon's current range is SB600, 700 and 900, have optical receivers on them that look for the coded message sent out by the pop up flash. The pop up flash send the signal out fractions of a second before it takes the photo. If you tell the pop up flash to send the signal, you can actually detect a slight delay of about .25-0.5 seconds(at least you can on my D90) before the picture is taken.

There are limitations to it, for example in best case scenarios you're limited to about 300 feet and the flash units need to see your pop up flash directly if you're working out doors.

Indoors they work brilliantly in a room. You can even shoot TTL with them, so you don't have to bother dealing with flash ratios or things like that. For more info check out Joe McNally or David Hobby (Strobist). Those two are pretty awesome (and they're going on Tour starting next month; I have a ticket!).

hope that helps.

Mirrorless? :s

yea... they're starting to head that way. I can't imagine that those cameras will be very good for any "pro" level applications.

18-megapixel CMOS sensor

Scene Intelligent Auto mode

Full-HD EOS Movie

On-screen Feature Guide

3.7fps continuous shooting

Wide-area 9-point AF

1,040k-dot vari-angle 7.7cm (3.0?) screen

Basic+ and Creative Filters

Built-in wireless flash control

Controlling flash through the pop up on an entry level camera? I hope Nikon's own sake they include that on their D5000 replacement.

To be honest this is barely an upgrade. Sony has pulled a couple of these releases haha...

And not including pop-up control on entry level bodies is BS, my entry level A200 can do that.

I think the rotating display makes it look less like an SLR and more like a cheaper Digital camera.

Maybe, but at the same time it might be usefull on certain occasions...like close to the ground shots, or when you raise your camera above your head :D

might be tempted to get a 550d as my second video camera, since it's going to come down in price :D

i got it recently on ebay with a 18-55mm IS lens for $599 shipped. it is coming down for sure

Canon though seriously needs to create a ripple in the industry like Nikon did with the Nikon D7000. Canon is too focuses on adding mini features instead of improving the very basics of camera and video like Nikon did with D7000. Also it seems Canon does not really interact with their consumers. Nikon on the other hand started the initiative to interact through social networks and their websites with their consumers by giving tips, tutorials, promoting their camera's in small cities.

Basically, it's like an optical cable, only it goes through the air.

The flash units, Nikon's current range is SB600, 700 and 900, have optical receivers on them that look for the coded message sent out by the pop up flash. The pop up flash send the signal out fractions of a second before it takes the photo. If you tell the pop up flash to send the signal, you can actually detect a slight delay of about .25-0.5 seconds(at least you can on my D90) before the picture is taken.

There are limitations to it, for example in best case scenarios you're limited to about 300 feet and the flash units need to see your pop up flash directly if you're working out doors.

Indoors they work brilliantly in a room. You can even shoot TTL with them, so you don't have to bother dealing with flash ratios or things like that. For more info check out Joe McNally or David Hobby (Strobist). Those two are pretty awesome (and they're going on Tour starting next month; I have a ticket!).

hope that helps.

yea... they're starting to head that way. I can't imagine that those cameras will be very good for any "pro" level applications.

Isn't that the same thing you could do with the old ones ?... With my EOS 400D I can use my pop up flash to fire my external Sigma flash, but both flashes will affect the image... Will this new feature only fire the external flash?

Isn't that the same thing you could do with the old ones ?... With my EOS 400D I can use my pop up flash to fire my external Sigma flash, but both flashes will affect the image... Will this new feature only fire the external flash?

nope, its not the same thing, as he mentioned, the pop up flash will send out the signal BEFORE it takes the photo. So the pop-up flash sends a signal essentially telling the slave(s) to get ready. Then when the camera takes the actual photo, only the slave's are exposing the shot not the pop-up flash

Isn't that the same thing you could do with the old ones ?... With my EOS 400D I can use my pop up flash to fire my external Sigma flash, but both flashes will affect the image... Will this new feature only fire the external flash?

The sigma flash is in dummy "slave" mode, meaning it'll fire when you see ANY flash. The flash I'm talking about lets you control the flash output either manually or TTL FROM the camera. You can't do that w/ the Sigma flash.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Looks like the 7.1 is fake effects, can it at least do real 5.1? It says 'virtual 7.1' in all descriptions.
    • You can't, if you didn't notice, it doesn't support surround at all, it's right in the spec list.
    • Hi — I’m always interested in soundcards. Like displays, I just want to know I’m getting as much clean “sonic juice” into my brain as possible as the years take their toll. I’m not entirely sure what to take away from this review, though. It doesn’t really tell me whether the AE‑X is a good product or who it’s actually for. Most of what I’m getting is: there’s a driver to install, here’s what it looks like, and here’s what’s in the box. There’s a lot of emphasis on the SPDIF input. When you mention not needing to switch headphones between console and PC — does that mean the PC has to be powered on just to pass audio through? That seems like a fairly big waste of energy. Is this more something a streamer would use alongside a capture card? How are you testing the sound? (Also, you might want to clarify that you’re using the headphones in wired mode when you mention they’re wireless.) You mention the lack of EMI shielding — how much real‑world difference does that make compared with typical motherboard audio? On multi‑channel: what exactly isn’t supported? Does this mean Windows spatial audio (Dolby Atmos for Headphones, DTS Headphone:X, etc.) won’t work, or just that the card itself doesn’t decode surround formats? And are there any true multi‑driver “surround” headphones left that would even use that? You also highlight support for high‑impedance headphones — but what does that translate to in practice? How does it compare to driving the same headphones from a normal device, and does it make any difference for everyday, lower‑impedance models? In short, who is this card actually targeted at?
    • Yes, THIS is wordart, not the styling that can now be done. Wordart was all about those curvy words, that you could change the path of, like making words go around a circle. I don't think it can be done now, right?
    • Just saw a news report of a Waymo driving into a flooded road.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      76
    5. 5
      Michael Scrip
      74
  • Tell a friend

    Love Neowin? Tell a friend!