Recommended Posts

Dude, that's harsh :(

I'm not all about destruction. But for me, it's does add a whole new angle of gameplay. The ability to create and destroy cover as and when you need it is really handy.

It sounds like destroying cover will still be possible, you just won't be knocking over any skyscrapers. :rofl:

EDIT: Also worth noting that the only source for this is the ign article, no where near official word from ea/dice... the only official word from ea has been "destruction 2.0 is not gone"

people need to stop flipping out at rumors :p. Also note that bf3 is still in an alpha.

I highly doubt bf3 will have less destruction than bc2.

I like collapsible houses in BC2 so I hope they'll make a return in BF3, but with some limitations depending on the map. For example, only allow some buildings to get brought down in Operation Metro so that the face of the map/gameplay isn't completely ruined (non collapsible houses could also work as a decent barrier between out of bounds and gameplay areas).

I like collapsible houses in BC2 so I hope they'll make a return in BF3, but with some limitations depending on the map. For example, only allow some buildings to get brought down in Operation Metro so that the face of the map/gameplay isn't completely ruined (non collapsible houses could also work as a decent barrier between out of bounds and gameplay areas).

Agreed. It'd be silly if you could collapse every structure on a map. By the end of the game, the map would look like a levelled wasteland.

Also...

Battlefield 3 Battlelog revealed

battlelog-620x499.jpg

Large view

After much talk about the new web-based Battlefield 3 service, Battlelog, DICE has finally revealed the first images of the new service, and it looks quite promising. Battlelog resembles a complete social network for Battlefield 3 players, with chat, profiles, news feed, forums etc. So far the service looks to be in alpha, and uses some Bad Company 2 icons and graphics as replacements. Here are a few more images of Battlelog:

Battlelog profile page

battlelog-31-620x358.jpg

Large view

Battlelog chat feature

battlelog-2-611x620.jpg

Large view

Source: BF3Blog (Unofficial)

:woot:

Damn, that Battlelog actually looks really cool. Right now I'm using Statsverse to keep track of everything in BC2, but having something that's integrated into the experience is definitely neat. The social networking stuff sounds interesting as well, and it totally makes sense for a game like this that plays so much better when you're in a squad with competent people.

Though I do see that your kill/death ratio and accuracy are both front and center on the page, which will be embarrassing for me :laugh: . At least score per minute is there as well, so I'll have one half-decent stat on my page.

I like collapsible houses in BC2 so I hope they'll make a return in BF3, but with some limitations depending on the map. For example, only allow some buildings to get brought down in Operation Metro so that the face of the map/gameplay isn't completely ruined (non collapsible houses could also work as a decent barrier between out of bounds and gameplay areas).

Agreed. Smaller structures should be collapsible and larger structures like skyscrapers should have destructible elements (eg walls/windows) but not collapse. Removing destruction completely would be disappointing.

Agreed. Smaller structures should be collapsible and larger structures like skyscrapers should have destructible elements (eg walls/windows) but not collapse. Removing destruction completely would be disappointing.

They are not going to remove destruction, simply SOME buildings won't be completely destructible to maintain a balanced gameplay, they already stated this in a podcast by Don't Revive Me Bro with Daniel Matros (zh1nt0).

http://www.neogaf.com/forum/showpost.php?p=29372573&postcount=2837

Might not stay up for long. Click click click!

Whoever leaked those forgot to hide their username in one of the screenshots.

It's been awhile since I last logged into the Battlefield veteran site. :(

Also, I got the following message after attempting to log into the BF3 alpha site:

WE'RE SORRY - YOU DON'T MEET THE CRITERIA TO ENTER THIS SITE.

hmm that's a bummer... i'm a veteran etc didn't have newsletter though do now still there's nothing. ahwell.

specs look a bit interesting though...

- OS: Windows 7 or Vista (SP1)

- Installed: Origin

- CPU: Quadcore 2.0 GHz or faster

- RAM: 4 GB or more

- Hard Drive: 7.25 GB of free disk space

- Video: 512 MB or greater DirectX compatible 10 or 11 card with latest drivers (5.11 or later AMD, nVidia 275.33 or later)

- Sound: DirectX compatible 10 or 11 card

- Internet: broadband connection

good thing my upgrade well passes them.

The trees fall down too.... blandly... I hope they have some splintering and break offs to exploded trees.

Indeed, but it's a start. I like it a lot more than being able to toss 10 RPGs at a tree and have it still standing as with current games. All the sound effects are amazing though!

Damn, that footage looks amazing.

And my Veteran status is an 8, and it should be a 9 as for some reason even though I have all of the games down as owned it does not register all 9, abut I also do not get anything but the denial message when I try to enter that site, so not really sure how much Veteran status plays into it all. Oh well. The Alpha footage above looks sweet as all hell though. :yes:

Oh wait, my Veteran status is correct, I never noticed this little disclaimer until just now...

Your veteran rank is always the total number of highlighted BF games that add to your vet rank, minus one.
This topic is now closed to further replies.
  • Posts

    • The machines are starting to fight back any way they can.
    • No news articles about the Arch Linux repo being majorly infected with malware?!?
    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
  • Recent Achievements

    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      599
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      77
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!