Recommended Posts

Meh, for most photos people take, you can do full automatic and it would turn out really well... why spend 20 minutes adjusting every setting to get the same results?

(However there are times where it is appropriate to adjust quite literally everything in M down to the amount flash power... woot)

opinion: Don't take photos with your camera built in flash, it really doesn't justify your SLR. invest in a decent external flash, you will find out v soon its really worth it

Just opened my new camera, and the first ever picture taken was............

IMG_0245.jpg

Shot in RAW, and understand the balances are off and it's blurry, but I was fiddling with some settings being my first shot with a DSLR

here is another tip:

move your DSLR settings to M, half press the shooting button and focus on the subject, notice the exposure bar, scroll the dot or line on it to between 0 and -0.3 and you will thank me the rest of your life. Oh and make sure your White balance is never auto, set it to the conditions

why take in automatic, when A or S will give you far better results, and more importantly the result you want, with no time to adjust.

if you're gonna shoot auto, get a point and shoot or a bridge.

Agreed. Automatic is for lazy people :D

Agreed. Automatic is for lazy people :D

true, if you are going to use Automatic its better to buy a Canon G11

Aperture and Speed Priority modes are your friend early on :)

for some reason A and S modes still don't do it for me, M for real quality, i know it takes time to get everything in order but worth it in the end

here is another tip:

move your DSLR settings to M, half press the shooting button and focus on the subject, notice the exposure bar, scroll the dot or line on it to between 0 and -0.3 and you will thank me the rest of your life. Oh and make sure your White balance is never auto, set it to the conditions

Coming from someone who has shot thousands upon thousands upon thousands of photos... as long as your shooting RAW (which he is) why would you set your WB to the conditions... Auto more often than not is PERFECT. My WB has never left auto, maybe 1/100 photos I need to adjust because I could manually make the WB a bit better than auto.

If you weren't shooting RAW than yeah WB is a big deal...

However, if you are going to be shooting in the same lighting conditions for a while then sure, why not just go manual WB, but then you may forget to change it back. Just leave it auto.

Coming from someone who has shot thousands upon thousands upon thousands of photos... as long as your shooting RAW (which he is) why would you set your WB to the conditions... Auto more often than not is PERFECT. My WB has never left auto, maybe 1/100 photos I need to adjust because I could manually make the WB a bit better than auto.

If you weren't shooting RAW than yeah WB is a big deal...

However, if you are going to be shooting in the same lighting conditions for a while then sure, why not just go manual WB, but then you may forget to change it back. Just leave it auto.

i noticed you have a nikon, they have a better much AWB than Canon. just talking from experience with my canon. I guess you are right about RAW but thats only if you are just willing to shoot raw and then spending hours editing your pictures to make sure the output from RAW is perfect (post adobe).

i noticed you have a nikon, they have a better much AWB than Canon. just talking from experience with my canon. I guess you are right about RAW but thats only if you are just willing to shoot raw and then spending hours editing your pictures to make sure the output from RAW is perfect (post adobe).

Well, I've never spent "hours" on a batch of photos, but I know what you mean, I guess some people could, even if I take say 400 photos, I will get through them all in a couple mins (if they are in same lighting conditions you can apply same settings to all photos easily in LR). But no, you are totally right, if you are not shooting RAW, than yeah you should manual set WB, I just figured because he said he'd shot this in RAW he plans on doing that indefinitely, in which case he is already editing certain things, a WB change will add maybe 20 seconds (tops)

JPEG = Manual WB

RAW = AWB unless you really want to go manual (but isn't necessary)

EDIT: just another note (sort of contradicting what I said earlier) if you are going to manually adjust each photo individually then yes I have spent an hour on a batch of even 100 photos.

Well, I've never spent "hours" on a batch of photos, but I know what you mean, I guess some people could, even if I take say 400 photos, I will get through them all in a couple mins (if they are in same lighting conditions you can apply same settings to all photos easily in LR). But no, you are totally right, if you are not shooting RAW, than yeah you should manual set WB, I just figured because he said he'd shot this in RAW he plans on doing that indefinitely, in which case he is already editing certain things, a WB change will add maybe 20 seconds (tops)

JPEG = Manual WB

RAW = AWB unless you really want to go manual (but isn't necessary)

EDIT: just another note (sort of contradicting what I said earlier) if you are going to manually adjust each photo individually then yes I have spent an hour on a batch of even 100 photos.

I guess the OP should invest in something like Adobe Lightroom (cheaper) or Adobe Photoshop (unlimited options/plugins). I have, its worth it in the end

I guess the OP should invest in something like Adobe Lightroom (cheaper) or Adobe Photoshop (unlimited options/plugins). I have, its worth it in the end

I only use LR, and it does everything I need, I would recommend that, unless (like you say) you are going to use the more advanced features of photoshop.

LR is GREAT (either way I would recommend it to catalogue all your photos)

Coming from someone who has shot thousands upon thousands upon thousands of photos... as long as your shooting RAW (which he is) why would you set your WB to the conditions... Auto more often than not is PERFECT. My WB has never left auto, maybe 1/100 photos I need to adjust because I could manually make the WB a bit better than auto.

If you weren't shooting RAW than yeah WB is a big deal...

However, if you are going to be shooting in the same lighting conditions for a while then sure, why not just go manual WB, but then you may forget to change it back. Just leave it auto.

I agree with this, AWB is very nice most of the times. However you can always edit it in PP for when it's not. Setting WB in-camera is a waste of shooting time (which IMO is more valuable than processing time). Besides, you can always batch-edit the WB if you're talking about a lot of photos.

I guess the OP should invest in something like Adobe Lightroom (cheaper) or Adobe Photoshop (unlimited options/plugins). I have, its worth it in the end

Well Photoshop is no repalcement for LR, and LR is no replacement for Photoshop. personally for a photographer, I think LR is more important, but having photoshop to will be great. with Lr changing the WB is a few seconds per photo. and then you can do all the other "developing" that makes it such a much better photo to. Like converting to BW where apropriate and adjusting for the right BW look.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!