How to Switch from IDE to AHCI without repairing/reinstalling windows

By +Warwagon
in Essential Guides

 Share

Recommended Posts

Grand Master

+Warwagon MVC

Posted
  • MVC
Posted

About 2 months ago I installed an SSD drive in my media center. For some reason up until tonight I never checked what the Sata mode was set to in the bios. It was set to IDE. I also really wasn't keen in reinstalling windows. Of course once you change it in the bios from IDE to AHCI windows will no longer boot. So I looked around the internet and found some really great instruction to switch from IDE to AHCI without having to repair or reinstall windows.

You start with step 1 while you are still in windows in IDE mode.

1) Run the Registry Editor (regedit.exe)

2) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci

3) Set the "Start" value to 0 (zero)

4) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide

5) Set the "Start" value to 0 (zero)

6) Shut down

7) Start up again, but before Windows boots go into the BIOS configuration screens and change the disk mode to "AHCI". Save the new BIOS configuration and restart so that Windows boots.

When Windows starts, it will detect the change, load new disk drivers, and do one more reboot to start up with them.

Veteran

neo158

Posted
Posted

I had to do this with my install as the new mobo had AHCI enabled by default.

Also, this trick only works on Windows Vista/7.

Microsoft have a Fix-It for this, it's linked in my sig.

Grand Master

+Warwagon MVC

Posted
  • Author
  • MVC
Posted

I had to do this with my install as the new mobo had AHCI enabled by default.

Also, this trick only works on Windows Vista/7.

Microsoft have a Fix-It for this, it's linked in my sig.

Thanks for the head up. Title edited

Grand Master

+Warwagon MVC

Posted
  • Author
  • MVC
Posted

Is there any real world benefit for using AHCI instead of IDE if i'm not running raid?

Apparently AHCI gives you much better performance when using SSD drives (but don't quote me on that)

Grand Master

Draconian Guppy

Posted
Posted

checked neo158's sig and came up with:

AHCI provides several features for SATA devices. These include hot plug functionality and power management functionality. For more information about the AHCI specification, visit the following Intel Web site:

http://www.intel.com/technology/serialata/ahci.htm

No really worth it I guess, at least not for HDDs not paired in any raid.

Veteran

iron2000

Posted
Posted

Msahci is already set to 3 and pciide is already set to 0, I assume this is running in AHCI mode already, right?

Maybe you can check in Device Manager under "IDE ATA/ATAPI controllers", if you're on AHCI there should be an AHCI controller under it.

To add on, if you don't like your internal drives showing up in "safely remove hardware" in the task tray - heres a tweak:

http://www.overclock.net/raid-controllers-software/974023-fix-ahci-sata-drives-showing-safely.html

----

Just tried AHCI on my P5K SE yesterday.

Had to flash a modded BIOS to unlock it.

Found the HDD connected to the first and second to SATA ports on the mb stuck at Multi-word DMA mode 2 (read from Device Manager).

Disk Management was also not working, it keeps on loading for a long time with a blank window.

In the end switched back to good old IDE where all drives are at UDMA mode 5 (though according to HDtune, my drives are capable of more.)

But everything works.

Grand Master

kinetix63 Veteran

Posted
  • Veteran
Posted

Is there any real world benefit for using AHCI instead of IDE if i'm not running raid?

Yes... provided you've got a hard drive that supports it (and most SATA-II drives do), AHCI enables Native Command Queuing on the drive, which can increase drive life and make things a bit faster. Of course, this doesn't really apply to SSD's, but for standard drives it's a big benefit: http://en.wikipedia.org/wiki/Native_command_queuing

  • 1 month later...
Grand Master

Steven P. Administrators

Posted
  • Administrators
Posted

This trick won't work with a NT5-OS right?

2K/XP supposedly supports it, you might want to read up on it though: http://www.overclock.net/intel-motherboards/269993-how-enable-ahci-ncq-windows-2k.html

  • 4 months later...
Apprentice

kevpc

Posted
Posted

hi all. would like some advice before i try the guide, if possible.

just got a new, overclocked system. mobo is Gigabyte Z68XP-UD4, running an i5 2500k o/c to 4.6gHz, 8gig DDR3 1600mhz Ram, nVidia GTX 550TI 1 Meg graphics card, WD Black Caviar 500gig sata lll hdd connected to sata lll on mobo. SATA ll Pioneer DVD Burner on a SATA ll connector and Pioner Sata BluRay burner on SATA ll connector,

i didn't check before i installed win7 ultimate x64 whether mobo was set to IDE or AHCI. found afterwards that there are 3 settings that are on IDE. these are:

PCH SATA Control Mode, GSATA3 Ctrl Mode and eSATA3 Ctrl Mode

to prevent reinstalling windows and programs, what i would like to know is,

can i change to AHCI in Bios after using the Reg Change above?

will i have to change all the 3 IDE settings used atm to AHCI, if not what one(s) do i change?

will i have to install the Intel AHCI drivers afterwards and perhaps other drivers as well? if so, which ones?

will it kick out my o/c?

anything else i need to know or will have to do?

hope someone can advise.

many TIA

Grand Master

TheLegendOfMart

Posted
Posted

1) Thats the only way to do it, you cant change to AHCI in the bios before you do the reg change or Windows will fail to boot

2) Yes change them all to AHCI

3) If you already have Intel drivers installed I think the drivers should already be cached so once it detects AHCI it should already have the drivers

4) No your o/c is fine

5) Nothing else to know

Apprentice

kevpc

Posted
Posted

many tnx for replies, guys. one more question, if you dont mind. forgot to ask this with other questions. if i change the registry as instructed but dont then change in the bios but leave it at IDE, will that have any adverse affects? did try to install the Intel AHCI, but was told 'this computer does not meet the minimum requirements for installing the software', so assume no AHCI drivers installed at all atm?

tnx again for help

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • IBM reveals sub-1nm chip technology, production expected in another 5 years

      By xrobwx71 · Posted

      https://i.imgur.com/dNY9tNv.png
    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug

      By Skyfrog · Posted

      I'm not sure I would call Ventoy a Rufus alternative.
    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips

      By pradeepviswav · Posted

      Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
    • Politically funny images of the World

      By Rigby · Posted

    • IBM reveals sub-1nm chip technology, production expected in another 5 years

      By pradeepviswav · Posted

      IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.

  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In

  • Popular Contributors

    1. 1
      +primortal
      455
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!