How to Switch from IDE to AHCI without repairing/reinstalling windows

By +Warwagon
in Essential Guides

 Share

Recommended Posts

Grand Master

+Warwagon MVC

Posted
  • MVC
Posted

About 2 months ago I installed an SSD drive in my media center. For some reason up until tonight I never checked what the Sata mode was set to in the bios. It was set to IDE. I also really wasn't keen in reinstalling windows. Of course once you change it in the bios from IDE to AHCI windows will no longer boot. So I looked around the internet and found some really great instruction to switch from IDE to AHCI without having to repair or reinstall windows.

You start with step 1 while you are still in windows in IDE mode.

1) Run the Registry Editor (regedit.exe)

2) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci

3) Set the "Start" value to 0 (zero)

4) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide

5) Set the "Start" value to 0 (zero)

6) Shut down

7) Start up again, but before Windows boots go into the BIOS configuration screens and change the disk mode to "AHCI". Save the new BIOS configuration and restart so that Windows boots.

When Windows starts, it will detect the change, load new disk drivers, and do one more reboot to start up with them.

Veteran

neo158

Posted
Posted

I had to do this with my install as the new mobo had AHCI enabled by default.

Also, this trick only works on Windows Vista/7.

Microsoft have a Fix-It for this, it's linked in my sig.

Grand Master

+Warwagon MVC

Posted
  • Author
  • MVC
Posted

I had to do this with my install as the new mobo had AHCI enabled by default.

Also, this trick only works on Windows Vista/7.

Microsoft have a Fix-It for this, it's linked in my sig.

Thanks for the head up. Title edited

Grand Master

+Warwagon MVC

Posted
  • Author
  • MVC
Posted

Is there any real world benefit for using AHCI instead of IDE if i'm not running raid?

Apparently AHCI gives you much better performance when using SSD drives (but don't quote me on that)

Grand Master

Draconian Guppy

Posted
Posted

checked neo158's sig and came up with:

AHCI provides several features for SATA devices. These include hot plug functionality and power management functionality. For more information about the AHCI specification, visit the following Intel Web site:

http://www.intel.com/technology/serialata/ahci.htm

No really worth it I guess, at least not for HDDs not paired in any raid.

Veteran

iron2000

Posted
Posted

Msahci is already set to 3 and pciide is already set to 0, I assume this is running in AHCI mode already, right?

Maybe you can check in Device Manager under "IDE ATA/ATAPI controllers", if you're on AHCI there should be an AHCI controller under it.

To add on, if you don't like your internal drives showing up in "safely remove hardware" in the task tray - heres a tweak:

http://www.overclock.net/raid-controllers-software/974023-fix-ahci-sata-drives-showing-safely.html

----

Just tried AHCI on my P5K SE yesterday.

Had to flash a modded BIOS to unlock it.

Found the HDD connected to the first and second to SATA ports on the mb stuck at Multi-word DMA mode 2 (read from Device Manager).

Disk Management was also not working, it keeps on loading for a long time with a blank window.

In the end switched back to good old IDE where all drives are at UDMA mode 5 (though according to HDtune, my drives are capable of more.)

But everything works.

Grand Master

kinetix63 Veteran

Posted
  • Veteran
Posted

Is there any real world benefit for using AHCI instead of IDE if i'm not running raid?

Yes... provided you've got a hard drive that supports it (and most SATA-II drives do), AHCI enables Native Command Queuing on the drive, which can increase drive life and make things a bit faster. Of course, this doesn't really apply to SSD's, but for standard drives it's a big benefit: http://en.wikipedia.org/wiki/Native_command_queuing

  • 1 month later...
Grand Master

Steven P. Administrators

Posted
  • Administrators
Posted

This trick won't work with a NT5-OS right?

2K/XP supposedly supports it, you might want to read up on it though: http://www.overclock.net/intel-motherboards/269993-how-enable-ahci-ncq-windows-2k.html

  • 4 months later...
Apprentice

kevpc

Posted
Posted

hi all. would like some advice before i try the guide, if possible.

just got a new, overclocked system. mobo is Gigabyte Z68XP-UD4, running an i5 2500k o/c to 4.6gHz, 8gig DDR3 1600mhz Ram, nVidia GTX 550TI 1 Meg graphics card, WD Black Caviar 500gig sata lll hdd connected to sata lll on mobo. SATA ll Pioneer DVD Burner on a SATA ll connector and Pioner Sata BluRay burner on SATA ll connector,

i didn't check before i installed win7 ultimate x64 whether mobo was set to IDE or AHCI. found afterwards that there are 3 settings that are on IDE. these are:

PCH SATA Control Mode, GSATA3 Ctrl Mode and eSATA3 Ctrl Mode

to prevent reinstalling windows and programs, what i would like to know is,

can i change to AHCI in Bios after using the Reg Change above?

will i have to change all the 3 IDE settings used atm to AHCI, if not what one(s) do i change?

will i have to install the Intel AHCI drivers afterwards and perhaps other drivers as well? if so, which ones?

will it kick out my o/c?

anything else i need to know or will have to do?

hope someone can advise.

many TIA

Grand Master

TheLegendOfMart

Posted
Posted

1) Thats the only way to do it, you cant change to AHCI in the bios before you do the reg change or Windows will fail to boot

2) Yes change them all to AHCI

3) If you already have Intel drivers installed I think the drivers should already be cached so once it detects AHCI it should already have the drivers

4) No your o/c is fine

5) Nothing else to know

Apprentice

kevpc

Posted
Posted

many tnx for replies, guys. one more question, if you dont mind. forgot to ask this with other questions. if i change the registry as instructed but dont then change in the bios but leave it at IDE, will that have any adverse affects? did try to install the Intel AHCI, but was told 'this computer does not meet the minimum requirements for installing the software', so assume no AHCI drivers installed at all atm?

tnx again for help

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Apple raises MacBook and iPad prices as memory costs surge

      By +Warwagon · Posted

      Now 8GB of ram looks even worse in the Neo. I'm so happy I purchased 128GB of DDR 4 when I did.... paid $174. Upgraded my parents laptop to 32GB around the same time for $48. Luckily I have a TON of spare laptops. So i'm good on laptops for a while. I also have a lot of desktops too that I could use if i had to. Lets just hope nothing happens to my main 4 monitor couch workstation.
    • Apple raises MacBook and iPad prices as memory costs surge

      By macoman · Posted

      I will keep my current devices for several years... no planning in upgrading until these devices stop working. Too pricey.
    • Apple raises MacBook and iPad prices as memory costs surge

      By Karthik Mudaliar · Posted

      Apple raises MacBook and iPad prices as memory costs surge by Karthik Mudaliar Apple has raised the U.S. prices of several MacBook and iPad models, including the MacBook Neo, which it launched for $599 less than four months ago. The company’s cheapest laptop now starts at $699, while some MacBook Pro configurations have increased by $300. The changes affect the MacBook Neo, MacBook Air, MacBook Pro, iPad Air, and iPad Pro. Apple has not changed the hardware or storage included with these models, so customers are simply paying more for the same configurations. Here is how the new US pricing compares with the previous starting prices: Product Previous price New price Increase MacBook Neo $599 $699 $100 13-inch MacBook Air, 512GB $1,099 $1,299 $200 14-inch MacBook Pro, 1TB $1,699 $1,999 $300 16-inch MacBook Pro $2,699 $2,999 $300 11-inch iPad Air, 128GB $599 $749 $150 13-inch iPad Air, 128GB $799 $949 $150 11-inch iPad Pro, 256GB $999 $1,199 $200 13-inch iPad Pro, 256GB $1,299 $1,499 $200 The updated prices are already appearing on Apple’s U.S. online store. The MacBook Neo increase will probably attract the most attention. Apple introduced the laptop in March for $599, pitching it as a more affordable Mac for students and buyers considering Windows laptops or Chromebooks. It uses an A18 Pro processor and originally undercut Dell’s new $699 XPS 13 by $100. Following the increase, the two laptops now have the same starting price. The M5 MacBook Air has also lost the price Apple promoted when it launched in March. The 13-inch model arrived with 512GB of storage for $1,099, while Apple’s store now lists the MacBook Air range as starting at $1,299. The 14-inch MacBook Pro with an M5 chip and 1TB of storage has gone from $1,699 to $1,999. Apple has made similar changes to its iPads. The recently released M4 iPad Air, which launched at the same $599 starting price as its predecessor, now starts at $749 for the 11-inch version. The 13-inch version has risen from $799 to $949. The iPad Pro increases are larger in dollar terms. Apple’s 11-inch M5 iPad Pro now starts at $1,199, up from $999, while the 13-inch version has moved from $1,299 to $1,499. Both base models still include 256GB of storage. Apple blamed the increases on the rapidly rising cost of DRAM and NAND flash, which provide system memory and device storage. The company told Reuters that it had tried to shield customers from the increases but could no longer absorb them. “We have never seen a component price increase this much, this quickly,” Apple said. Tim Cook had already warned that price increases were coming. Cook said Apple’s existing component inventory had softened the immediate impact, but that higher memory costs would increasingly affect the company after the June quarter. Much of the pressure comes from the construction of AI data centers. Memory manufacturers are directing more production toward high-margin server products, leaving PC, tablet, and smartphone makers competing for the remaining supply. Apple has not said whether the new prices are temporary or whether further increases are planned. For now, the changes show that even Apple’s purchasing power has not been enough to keep the AI-driven memory shortage away from consumer devices.
    • Ventoy 1.1.16

      By Copernic · Posted

      Ventoy 1.1.16 is out.
    • This Chinese company is reportedly developing a feature Apple and Samsung can only dream of

      By Mateus · Posted

      This is a none story - these low volume Chinese models will always get new experimental features first because Apple and Samsung can't produce them in huge volume to meet demand.

  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated

  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      77
    5. 5
      Xenon
      77
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!