How to Switch from IDE to AHCI without repairing/reinstalling windows


Recommended Posts

About 2 months ago I installed an SSD drive in my media center. For some reason up until tonight I never checked what the Sata mode was set to in the bios. It was set to IDE. I also really wasn't keen in reinstalling windows. Of course once you change it in the bios from IDE to AHCI windows will no longer boot. So I looked around the internet and found some really great instruction to switch from IDE to AHCI without having to repair or reinstall windows.

You start with step 1 while you are still in windows in IDE mode.

1) Run the Registry Editor (regedit.exe)

2) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci

3) Set the "Start" value to 0 (zero)

4) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide

5) Set the "Start" value to 0 (zero)

6) Shut down

7) Start up again, but before Windows boots go into the BIOS configuration screens and change the disk mode to "AHCI". Save the new BIOS configuration and restart so that Windows boots.

When Windows starts, it will detect the change, load new disk drivers, and do one more reboot to start up with them.

I had to do this with my install as the new mobo had AHCI enabled by default.

Also, this trick only works on Windows Vista/7.

Microsoft have a Fix-It for this, it's linked in my sig.

I had to do this with my install as the new mobo had AHCI enabled by default.

Also, this trick only works on Windows Vista/7.

Microsoft have a Fix-It for this, it's linked in my sig.

Thanks for the head up. Title edited

Is there any real world benefit for using AHCI instead of IDE if i'm not running raid?

Apparently AHCI gives you much better performance when using SSD drives (but don't quote me on that)

checked neo158's sig and came up with:

AHCI provides several features for SATA devices. These include hot plug functionality and power management functionality. For more information about the AHCI specification, visit the following Intel Web site:

http://www.intel.com/technology/serialata/ahci.htm

No really worth it I guess, at least not for HDDs not paired in any raid.

Msahci is already set to 3 and pciide is already set to 0, I assume this is running in AHCI mode already, right?

Maybe you can check in Device Manager under "IDE ATA/ATAPI controllers", if you're on AHCI there should be an AHCI controller under it.

To add on, if you don't like your internal drives showing up in "safely remove hardware" in the task tray - heres a tweak:

http://www.overclock.net/raid-controllers-software/974023-fix-ahci-sata-drives-showing-safely.html

----

Just tried AHCI on my P5K SE yesterday.

Had to flash a modded BIOS to unlock it.

Found the HDD connected to the first and second to SATA ports on the mb stuck at Multi-word DMA mode 2 (read from Device Manager).

Disk Management was also not working, it keeps on loading for a long time with a blank window.

In the end switched back to good old IDE where all drives are at UDMA mode 5 (though according to HDtune, my drives are capable of more.)

But everything works.

Is there any real world benefit for using AHCI instead of IDE if i'm not running raid?

Yes... provided you've got a hard drive that supports it (and most SATA-II drives do), AHCI enables Native Command Queuing on the drive, which can increase drive life and make things a bit faster. Of course, this doesn't really apply to SSD's, but for standard drives it's a big benefit: http://en.wikipedia.org/wiki/Native_command_queuing

  • 1 month later...

This trick won't work with a NT5-OS right?

2K/XP supposedly supports it, you might want to read up on it though: http://www.overclock.net/intel-motherboards/269993-how-enable-ahci-ncq-windows-2k.html

  • 4 months later...

hi all. would like some advice before i try the guide, if possible.

just got a new, overclocked system. mobo is Gigabyte Z68XP-UD4, running an i5 2500k o/c to 4.6gHz, 8gig DDR3 1600mhz Ram, nVidia GTX 550TI 1 Meg graphics card, WD Black Caviar 500gig sata lll hdd connected to sata lll on mobo. SATA ll Pioneer DVD Burner on a SATA ll connector and Pioner Sata BluRay burner on SATA ll connector,

i didn't check before i installed win7 ultimate x64 whether mobo was set to IDE or AHCI. found afterwards that there are 3 settings that are on IDE. these are:

PCH SATA Control Mode, GSATA3 Ctrl Mode and eSATA3 Ctrl Mode

to prevent reinstalling windows and programs, what i would like to know is,

can i change to AHCI in Bios after using the Reg Change above?

will i have to change all the 3 IDE settings used atm to AHCI, if not what one(s) do i change?

will i have to install the Intel AHCI drivers afterwards and perhaps other drivers as well? if so, which ones?

will it kick out my o/c?

anything else i need to know or will have to do?

hope someone can advise.

many TIA

1) Thats the only way to do it, you cant change to AHCI in the bios before you do the reg change or Windows will fail to boot

2) Yes change them all to AHCI

3) If you already have Intel drivers installed I think the drivers should already be cached so once it detects AHCI it should already have the drivers

4) No your o/c is fine

5) Nothing else to know

many tnx for replies, guys. one more question, if you dont mind. forgot to ask this with other questions. if i change the registry as instructed but dont then change in the bios but leave it at IDE, will that have any adverse affects? did try to install the Intel AHCI, but was told 'this computer does not meet the minimum requirements for installing the software', so assume no AHCI drivers installed at all atm?

tnx again for help

This topic is now closed to further replies.
  • Posts

    • I and many others did not vote to get out of the E.u because of Putin or Farage, we did so for our own reasons. You don't have to tel me what my own did or did not do when it comes to the E.U. The EEC is or was the European Economic Community, a different beast to what the E.U is now.The EEC was a mainly about trading, the E.U have gone far beyond that and as I have said before, is now more of a United States of Europe. The U.K did not vote to join a United States of Europe. Anyway, they did not want us in there in the first place, Charles de Gaulle stopped us joining as he claimed we didn’t agree with the core ideas of integration. He was not wrong and that is why we voted out of the E.U when the time came. I was not old enough to vote the first time. My only regret is that we did not have the referendum years ago and got out years ago. If we rejoined, we would have to agree to join the Euro and no doubt Schengen, agree with freedom of movement, we have enough problem with people coming over here as it is. i have no problem with people coming over here if they work and don't try to push their way of life onto us. The E.U has a currency, freedom of movement, an anthem a flag, a parliament, well they are there, not sure if they do anything. Don't sound like something that is just for trading. Oh yeah, also wanted a euro Army. How many stupid rules have the E.U made that we had to follow? I doubt I will see the Uk rejoin the E.U, which suits me. Oh yeah, my partner is Polish, she came over here before Poland joined the E.U and she got fed up of people just coming over here with ease, while she had to struggle. She is now a British citizen and have been for a fair few years
    • Hello, Paul. Thanks for the editorial. It was interesting. I'm going research more into the app and its concept. Of course, if you know me at all, you know that I'd say your articles needs some editing! I a;ways do, don't I? For instance, the article occasionally mentions a concept before defining it, e.g., relays.
    • Screamer is 50% off on Steam, making it £24.99 here in the UK: https://store.steampowered.com/app/2814990/Screamer/ You might remember the series from the mid 90s / early 2000s, this new game is also by Milestone who created the older games.
    • U.S. partially reverses Anthropic AI ban for Mythos but keeps Fable 5 off the market by Karthik Mudaliar Anthropic says that the U.S. government has finally allowed it to restore Claude Mythos 5. But of course, there's a catch. The rollout is again for a limited set of U.S. organizations that operate and defend critical infrastructure. The company announced this in a post on X (formerly Twitter). This does not mean that Anthropic's latest frontier models are back to normal availability. Fable 5, which was a tuned version of Mythos 5 for public release, remains unavailable. Anthropic said that it is still working with the government to expand Mythos 5 access and make Fable 5 available again, but there's no timeline. Reports from Bloomberg and Reuters say that this decision actually came through a letter from the U.S. Commerce Department. According to Reuters, this would allow more than 100 companies and institutions access to Mythos 5. Reuters also reported that Commerce Secretary Howard Lutnick’s letter removes the need for export licenses for approved companies’ non-US citizen employees, as well as Anthropic’s own non-US citizen employees, while restrictions remain for organizations outside the approved list. Anthropic isn't alone with this kind of controlled rollout. OpenAI's newest model family, GPT 5.6, was announced just yesterday, but isn't available for everyone yet. In its announcement, OpenAI also said that access to these models is initially limited to a select group of trusted partners and organizations, with broader access planned later this year. Both of these cases show that frontier AI launches are no longer just ordinary product releases and more like slow and vetted deployments shaped heavily by the U.S. government.
    • Sol, Terra, Luna - aren't those the names of failed crypto coins? 🤣🤣🤣
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      226
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!