Recommended Posts

@primexx: They're the same, the only confusion starts when people use / for fractions ie on the internet, if I wrote 1/2*3, it should be seen as (1/2)x3 (by some logic I guess, at least what I learned in school), but some people use it in a way to describe this fraction:

1

--

2*3

And the only correct way of writing this fraction in one line is: 1/(2*3).

So, to clarify it once and for all, the formula in the post title reads:

48

-- * (9+3)

2

And the only correct solution is 288.

Anyway, I read both / and ? as DIVISION, and as such, it applies only to the digit right of it, unless specified differently by brackets.

@primexx: They're the same, the only confusion starts when people use / for fractions ie on the internet, if I wrote 1/2*3, it should be seen as (1/2)x3 (by some logic I guess, at least what I learned in school), but some people use it in a way to describe this fraction:

1

--

2*3

And the only correct way of writing this fraction in one line is: 1/(2*3).

Well yeah, but here you don't have the problem of the juxtaposition.

1/2*3 should be solved by writing each factor between brackets like this:

(1)*(1/2)*(3).

It's just the juxtaposition that has multiple interpretations depending on what convetions you learned that is causing the problems.

@primexx: They're the same, the only confusion starts when people use / for fractions ie on the internet, if I wrote 1/2*3, it should be seen as (1/2)x3 (by some logic I guess, at least what I learned in school), but some people use it in a way to describe this fraction:

1

--

2*3

And the only correct way of writing this fraction in one line is: 1/(2*3).

So, to clarify it once and for all, the formula in the post title reads:

48

-- * (9+3)

2

And the only correct solution is 288.

Anyway, I read both / and ? as DIVISION, and as such, it applies only to the digit right of it, unless specified differently by brackets.

Good points, indeed.

Now I'm unsure again.

PEMDAS. Order of operations.

Parenthesis/Exponents/Multiplication/Division/Addition/Subtraction

Zzz... Read last two pages. Multiplication does not have priority over Division (and the other way around). Same goes for addition and substraction.

Good points, indeed.

Now I'm unsure again.

he's right, but it doesn't address the original point of the juxtaposition convention, which Ambroos correctly identifies as the point of difference.

I still maintain that multiplying any arbitrary term by 1 should not result in a different answer, and if a rule of precedence results in a discrepancy, then the rule is demonstrably flawed.

edit: at least we can all agree that the people citing mnemonics in the exact order need to RTFT :p

he's right, but it doesn't address the original point of the juxtaposition convention, which Ambroos correctly identifies as the point of difference.

I still maintain that multiplying any arbitrary term by 1 should not result in a different answer, and if a rule of precedence results in a discrepancy, then the rule is demonstrably flawed.

edit: at least we can all agree that the people citing mnemonics in the exact order need to RTFT :p

His beginning premise was wrong, if you look at the formula the way I've written it (and the correct way), he can't possibly multiply (9 +3) with 2, therefore multiplying anything by 1 doesn't change the end result in no way whatsoever -- which is one of the basic things we learn in math.

I still maintain that multiplying any arbitrary term by 1 should not result in a different answer, and if a rule of precedence results in a discrepancy, then the rule is demonstrably flawed.

I agree with you that it shouldn't, but that's the exact problem of conventions. Not everyone follows them, they're not mathematically correct and they only apply to strict situations that would otherwise not be possible to be solved... Conventions are basically just incorrect rules that exist to solve the unsolvable...

His beginning premise was wrong, if you look at the formula the way I've written it (and the correct way), he can't possibly multiply (9 +3) with 2, therefore multiplying anything by 1 doesn't change the end result in no way whatsoever -- which is one of the basic things we learn in math.

i don't think he began with the premise that the division symbol encapsulated everything following it. he was arguing that some little known rule of precedence (which I've demonstrated to be stupid by now) requires you do the number beside the bracket first, which of course is ridiculous especially with the way you wrote the formula.

I agree with you that it shouldn't, but that's the exact problem of conventions. Not everyone follows them, they're not mathematically correct and they only apply to strict situations that would otherwise not be possible to be solved... Conventions are basically just incorrect rules that exist to solve the unsolvable...

that's a rather strict definition of what it is to be "correct", but of course conventions are not laws.

We have this convention in high school that for ambiguous terms, if you mean to have a parenthesis in it then put it. Otherwise no parenthesis means there shouldn't be one there. So in this case if you mean to divide 48 by 2 should put (48?2)(9+3)=288. But since there's no parenthesis so the answer is 2.

We have this convention in high school that for ambiguous terms, if you mean to have a parenthesis in it then put it. Otherwise no parenthesis means there shouldn't be one there. So in this case if you mean to divide 48 by 2 should put (48?2)(9+3)=288. But since there's no parenthesis so the answer is 2.

Actually I think that's backwards. If you don't assume parentheses* around the 2(9+3) then what you actually have is 48 / 2 * 12, which evaluates to 288. In order to get 2 you have to assume parentheses*, so 48/(2(9+3)) which is 48/24, or 2.

* And by assume parentheses I mean treating a distribution as higher presidence than normal multiplication, which is the main argument in this thread.

Actually I think that's backwards. If you don't assume parentheses* around the 2(9+3) then what you actually have is 48 / 2 * 12, which evaluates to 288. In order to get 2 you have to assume parentheses*, so 48/(2(9+3)) which is 48/24, or 2.

* And by assume parentheses I mean treating a distribution as higher presidence than normal multiplication, which is the main argument in this thread.

I'm talking about parenthesis around 48/2. The convention in parentheses is on top of juxtaposition precedence. If it seems ambiguous this is how we resolve it. The need to put parentheses in the denominator comes when the denominator is composed of addition elements. e.g. 48/[2(9+3) + 18 + 6] = 1 whereas 48/2(9+3) + 18 + 6 = 26.

If you didn't put parentheses then it's not meant to be there, on top of other conventions/rules. If I meant (48/2)(9+3) I would have written 48(9+3)/2.

48?2(9+3)

48/2*(9+3)

48/2*(12)

48/2*12 because (12) evaluates to 12

24*12

288

Very tricky question. It doesn't help that ? looks like +. Anyway, it's pretty obvious if you do some manipulations. For instance:

X = (9 + 12);

Y = 48/2*X;

Obviously the value of Y would be 288 because the order of operations are more clear.

Or if you represent it as a fraction as you would on paper:

48

--- x (9 + 3) = 48(9+3)/2 = 288

2

Look, this isn't a difficult problem. If you don't believe that the answer is 288, try typing it into a calculator. Write a program in any programming language. Try WolframAlpha.

http://www.wolframalpha.com/input/?i=48%2F2%289%2B3%29

You are making this WAY more difficult than it really is.

If you can't solve this problem, you also will have trouble with problems like this: 1/2((3/4)5)/6 = 5/16

Actually I think that's backwards. If you don't assume parentheses* around the 2(9+3) then what you actually have is 48 / 2 * 12, which evaluates to 288. In order to get 2 you have to assume parentheses*, so 48/(2(9+3)) which is 48/24, or 2.

* And by assume parentheses I mean treating a distribution as higher presidence than normal multiplication, which is the main argument in this thread.

Do you need to distribute in order to solve the expression in parentheses?

If so then the very first expression that is calculated by priority of Parentheses is 2(9+3) or (2 x 9 + 2 x3). The fundamental question is can the 9 and 3 be added together without factoring in the 2?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • EU needs the money, and the EUC lawyers dream at night about more of those huge commissions... Personally, if companies do things I don't like I don't purchase or use their products. I can think of few things worse than the horrid specter of government designed & "approved" software. But I guess things are different in the EU. I'd likely feel differently about this stuff if the lawyers did it pro bono, and the billion-dollar fines were rebated to the consumers the EUC claims it is protecting--but that never happens. The bizarre thing is that EU consumers seem unaware that all those fines come back to the companies forced to pay them in higher costs for the goods and services those companies sell them. Why that bit of logic escapes their attention is puzzling. So, now, we just sit back and wait on the next pretext the EUC lawyers come up with to rob these companies whose products no one in the EU is forced to buy and use in the first place. Rinse, repeat. It's become a very addictive habit of the EUC.
    • When companies do "opt-out" it's because they know that no one will opt-in...
    • the chip might be a binned 5090 so no, youre actually getting the 5090
    • How to set custom folder icons in Windows 11 File Explorer by Usama Jawad Although there are many third-party tools like Windhawk, FlyOOBE, DeskScapes 2026, and more that can be used to customize and tweak Windows 11 according to your preferences, many people often forget that the operating system natively offers a lot of configurability too. One such handy option is available inside File Explorer, where you can set custom folder icons to personalize your experience very quickly. File Explorer is an interface that Windows 11 users leverage rather heavily, so it can get quite boring looking at default icons. It can also be a bit tedious reading the text of each item to navigate to the folder you need. In cases like these, custom folder icons can come in quite handy as they allow you to not only personalize File Explorer, but also offer meaningful aesthetics that can make navigation quicker. Here is how to configure custom folder icons in Windows 11: Download icon files (.ico) from a third-party website of your choice. There are lots of free options online, like Icon Archive. You'll also be able to download them directly from Google Images Open File Explorer Navigate to the folder you want to customize Right-click the folder Select Properties Go to the Customize tab Select Change Icon If you want, you can select a native icon from the Windows directory, but for the purpose of this guide, we'll select the third-party .ico file that we downloaded. As such, select Browse Navigate to the .ico file and double-click it Click Apply, followed by OK That's all there is to it! It shouldn't take more than a minute after downloading the .ico file of your choice. The good news is also that you are not married to the icon you set; you can restore it to the default icon by simply selecting Restore Defaults in the interface mentioned in step 8. It's a very easy way to customize File Explorer, with any changes in this regard being quickly reversible. I would also recommend using View > Extra large icons in File Explorer so that you can properly enjoy the aesthetics. You can also download the entire Object Desktop package. Object Desktop includes programs such as Fences, Start11, Groupy, SoundPackager, DeskScapes and Multiplicity. Disclaimer: Neowin's relationship to Stardock
    • Teams on macOS has a major bug for some users, and Microsoft is rolling out guidance by Usama Jawad Teams is one of the most used online communication and collaboration tools especially in enterprise and school environments. It is available on a variety of platforms including Android, iOS, Windows, macOS, and the web. As such, it is a major problem when users on any of the aforementioned platforms get affected. In its Message Center advisory MC1392559, Microsoft acknowledged a bug impacting Teams customers on certain versions of macOS a few weeks ago. Basically, if affected users start sharing their screen, they'll see a black or blank screen, experience interruptions while sharing, and even face complete failure in screen sharing functionality. This is impacting customers using macOS versions older than Tahoe 26.4, and PCs which are resource-constrained on disk and memory. Interestingly, the scope of this issue appears to be limited as Microsoft has only listed Government Community Cloud (GCC), GCC High, and Department of Defense (DoD) as the affected platforms. Since it can be confusing to customers when the bug appears randomly and troubleshooting methods aren't always obvious, Microsoft is working on introducing some in-product guidance that automatically gets shown to users when a screen sharing failure is detected. They'll be asked to retry sharing their screen and will also be requested to update their macOS version, when applicable. If that is not possible, the Redmond tech giant has urged users to apply a mitigation that involves navigating to Teams Settings > General > Screen sharing > Use Mac OS native sharing. A restart isn't required. Regardless, Microsoft has recommended IT admins to inform their helpdesks about this issue, update their internal documentation, communicate the problem across the organization, and update macOS Tahoe 26.4 devices, where possible. The in-product guidance will begin rolling out later this month and should hopefully be available to all by mid-August.
  • Recent Achievements

    • One Month Later
      pahariyaseo earned a badge
      One Month Later
    • Week One Done
      pahariyaseo earned a badge
      Week One Done
    • Week One Done
      hadiaali45 earned a badge
      Week One Done
    • Week One Done
      arone_24 earned a badge
      Week One Done
    • Reacting Well
      flexorcist earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      414
    2. 2
      PsYcHoKiLLa
      143
    3. 3
      Nick H.
      89
    4. 4
      +Edouard
      82
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!