An interesting "foot in the door" experience


Recommended Posts

I noticed my friend and his daughter playing outside on a nice day. I had been taking some pictures on a day trip with my own 2-year old, so we decided to go over there and hang out for a few minutes. My friend had expressed interest in photography and complaining about how his camera can't take good pictures, etc. So I took some pictures of him and his daughter and my son on a nice day in the shade (hard to screw those pictures up, amirite?), and posted them to Facebook.

Needless to say, he was thrilled that I took some high quality pictures, and immediately shared the pictures with friends and family. A day later, I already have people expressing interest in taking pictures of their own families, in that Facebook-esque casual candid style. Don't know if I'll ever make something out of this opportunity (wayyyyy to much else going on to start doing this for pay), but I thought it was a cool story, and a good example of using social networks as a free distribution and marketing tool, especially for amateurs like myself.

Also, the quality of these photos is nowhere near professional. However, the use of Facebook as the "gallery" has a distinct advantage in being a veritable warehouse of crappy cell phone photos. Any picture from a decent camera automatically pops out in Facebook news feeds just because the competition is so bad. You don't really get that advantage on Flickr. Also, make sure you don't have a lot of Facebook friends who are photographers :p

Equipment used:

Nikon D3100 | 18-55mm f/3.5-5.6 Nikkor

Samples:

215093_545304523727_52602206_31208316_2921783_n.jpg

207779_545304548677_52602206_31208317_1405797_n.jpg

207423_545304573627_52602206_31208318_3866901_n.jpg

You should look at the stuff bubbabyte shoots, IMO he's got talent for shooting his kids. :p

As for the photos,

here my take:

1 and 2. Under-exposed

3. Is the best but the car in background ruins it.

I was unfortunately taking pictures into a sunset in late afternoon. I was also under shade, which caused some variable lighting conditions. Any tips on how to expose correctly in that situation? I was already wide open as far as aperture goes, I guess I could have stepped up the ISO.

3 was tough because it originally was super over exposed, having the frikin sun in the background and all. Took some post-processing to get the subjects right in that one.

Here's my favorite of the set. A little dark, too, but it still came out nice. And plz2ignore the drool :p

216414_545304603567_52602206_31208319_1587228_n.jpg

I was unfortunately taking pictures into a sunset in late afternoon. I was also under shade, which caused some variable lighting conditions. Any tips on how to expose correctly in that situation? I was already wide open as far as aperture goes, I guess I could have stepped up the ISO.

You don't mention your shutter speed, but I am guessing it was near the limit of what would be acceptable until introducing blur from camera shake... If not, then your two options to add more light would be:

1. lower shutter speed

2. increase ISO (as you mentioned)

Don't be afraid of increasing ISO... When I first got my DSLR my camera was NEVER above ISO 200 (note this was my first ever camera)... then after 2 months I realized that was stupid of me... Sure, if you can, keep it as low as possible, but I get usable shots at 1600 with my D90.

If I recall correctly you are shooting in manual, so in this situation try and make sure the meter is more towards the "plus" by changing the variables I mentioned above... In addition you can experiment with various exposure weight options (can't recall the official name). For example, use spot metering opposed to an overall image average, this way you can get the correct exposure on your subject without having strong lighting in the background (or where ever else) effect your camera's metering.

Well, it's usually easier to shoot with the sun in front and not in the back, which is what happened in the first two pictures, your camera meters for the light in the back and not on the faces.

Try shooting S or A, M can be a handful for beginners (aperture, shutter + exposure )

Also, what quality are you shooting at? You photos have a weird softness to them.

Also, what quality are you shooting at? You photos have a weird softness to them.

He shoots RAW for the most part, I noticed this too... I immediately dismissed it as being a byproduct of using a kit lens...

To add to this, what kind of post-work did you do (or what program did you run it through to convert from RAW to .jpg)?

In addition you can experiment with various exposure weight options (can't recall the official name). For example, use spot metering opposed to an overall image average, this way you can get the correct exposure on your subject without having strong lighting in the background (or where ever else) effect your camera's metering.

I really haven't touched the metering settings yet. I know technically what they do, but I'm just mastering on-the-fly manual settings of A, S, and ISO, so I'll get to that eventually I guess.

Well, it's usually easier to shoot with the sun in front and not in the back, which is what happened in the first two pictures, your camera meters for the light in the back and not on the faces.Try shooting S or A, M can be a handful for beginners (aperture, shutter + exposure ) Also, what quality are you shooting at? You photos have a weird softness to them.

He shoots RAW for the most part, I noticed this too... I immediately dismissed it as being a byproduct of using a kit lens...To add to this, what kind of post-work did you do (or what program did you run it through to convert from RAW to .jpg)?

Ya, this is in RAW. When I first sit at the PC, I put the photos in NXview. With RAW, NXView does magical things with WB settings. It's made some so-so shots look gorgeous. I also use that to convert to Jpeg. Keep in mind these are facebook uploads, so i don't know if that takes away quality in and of itself.

I went through the 30 day trial of Lightroom, and I really enjoyed it. Unfortunately, it ain't cheap. I might be able to squeeze a licence out of my company for photoshop CS5 (for "business" use, and being in IT, I really could just install the thing and be done with it), but the chances of that are slim. I can't stand the Gimp UI, and I don't really know of anything else that works well and is free. The WB and Picture Settings in NXViewer are great tools, though. For basic photo editing, it does the job for free.

My typical editing process is:

- Tweak WB.

- Up the contrast a bit (personal preference here. I like my images a little contrasty)

- Boost the saturation a bit. I tend to oversaturate, and you can see that in some of the photos above.

Ya, this is in RAW. When I first sit at the PC, I put the photos in NXview. With RAW, NXView does magical things with WB settings. It's made some so-so shots look gorgeous. I also use that to convert to Jpeg. Keep in mind these are facebook uploads, so i don't know if that takes away quality in and of itself.

Facebook applies their own algorithm to the photos uploaded, which IMO makes the majority of my shots look worse than when viewed through flickr (look into starting an account there)

I was going to suggest LR, but since you already know of it...

Facebook applies their own algorithm to the photos uploaded, which IMO makes the majority of my shots look worse than when viewed through flickr (look into starting an account there)

I was going to suggest LR, but since you already know of it...

http://www.flickr.com/photos/60484419@N06/

I use it also, but most of my friends and family won't see that stuff, so I'm forced to use facebook.

You don't mention your shutter speed, but I am guessing it was near the limit of what would be acceptable until introducing blur from camera shake... If not, then your two options to add more light would be:

1. lower shutter speed

2. increase ISO (as you mentioned)

Don't be afraid of increasing ISO... When I first got my DSLR my camera was NEVER above ISO 200 (note this was my first ever camera)... then after 2 months I realized that was stupid of me... Sure, if you can, keep it as low as possible, but I get usable shots at 1600 with my D90.

+1

FYI: Most shots where the exposure is off by +/- 1 EV or less can be easily corrected in Lightroom with minimum quality loss.

+2

http://www.flickr.com/photos/60484419@N06/

I use it also, but most of my friends and family won't see that stuff, so I'm forced to use facebook.

Meh facebook :/

Also, I think the default windows photo viewer has a couple of editing options.. Though I would try to squeeze that CS5 out of your company, nothing beats proper tools :)

I was browsing through your flickr account and most pics are sharp, so yeah, it's probably facebook algorithm.

Also Auto-WB on nikon is usually really good, I tend not to mess with WB unless under artifical lighting (fluorescent or incandescent )

Also, see how everyone days only good things about nikon :p ! Don't believe it! Lies I tell ya! Lies! But surely enough, that's what C & C is about, improving!

The only recommendation I can make when it comes to shooting pictures of children is...get down to their level.

Don't shoot down; kneel down and shoot straight.

+1000, generally applies to all subjects.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • We had no idea as kids how much time and energy it took to be an adult 😅
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval by David Uzondu Image via @realDonalTrump (X) As OpenAI prepares the release of its next model, GPT 5.6, the White House has instructed the company to limit the distribution of the software to a small group of government-approved partners instead of the general public, as it has done with previous releases. According to The Information, OpenAI Chief Executive Officer Sam Altman sent an internal memo to staff on Thursday explaining that the federal government will approve access "customer by customer" during an initial preview phase. Altman noted in the communication that this restrictive rollout is "not [their] long-term model" for software deployment, and the company plans to work toward a "more sustainable" distribution method later. CNN said that both OpenAI and the Trump administration view the capabilities of GPT 5.6 on the same level as Anthropic's Mythos and that government officials intend to "collaborate with frontier AI labs to develop shared approaches for addressing the challenges of scaling this technology." The latest restriction comes just weeks after the US Commerce Department decided to restrict Fable, a version of Mythos with extra safety "guardrails" to prevent users from exploiting software vulnerabilities. Not long after the release, though, researchers at Amazon found a way to bypass these restrictions, prompting an aggressive response from federal authorities. The government ordered Anthropic to cut off access for non-US citizens located outside the US, non-US citizens living inside the US, and incredibly, even Anthropic's own foreign-born employees. Anthropic now appears to be building a workaround to resolve this compliance block with an update to its Privacy Policy that introduces a category called "Verification Data" to handle KYC and Digital IDs. This setup could mandate digital identity checks to filter users by nationality, requiring a government-issued ID and facial biometric data. Who knows? Maybe in the future, you would have to scan your US Passport or State ID to prove your citizenship before you are allowed to chat with Fable 5 (or any other model).
    • When Windows 7 was released I created an AutoHotkey script that uses Alt+` as a keyboard shortcut to move a window across monitors. I have been using that script for over 15 years and this is the first time I have come across another app that uses the same shortcut!
    • I called it last year that they wouldn't end support when they said there would. There are too many people still on Windows 10 waiting for something better to upgrade to and 11 ain't it! The recent promises of fixing Windows 11's many problems is nice, but unless they deliver on those promises in a big way then I expect customers will still want to stick with 10.
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      412
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      128
    4. 4
      neufuse
      69
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!