An interesting "foot in the door" experience


Recommended Posts

I noticed my friend and his daughter playing outside on a nice day. I had been taking some pictures on a day trip with my own 2-year old, so we decided to go over there and hang out for a few minutes. My friend had expressed interest in photography and complaining about how his camera can't take good pictures, etc. So I took some pictures of him and his daughter and my son on a nice day in the shade (hard to screw those pictures up, amirite?), and posted them to Facebook.

Needless to say, he was thrilled that I took some high quality pictures, and immediately shared the pictures with friends and family. A day later, I already have people expressing interest in taking pictures of their own families, in that Facebook-esque casual candid style. Don't know if I'll ever make something out of this opportunity (wayyyyy to much else going on to start doing this for pay), but I thought it was a cool story, and a good example of using social networks as a free distribution and marketing tool, especially for amateurs like myself.

Also, the quality of these photos is nowhere near professional. However, the use of Facebook as the "gallery" has a distinct advantage in being a veritable warehouse of crappy cell phone photos. Any picture from a decent camera automatically pops out in Facebook news feeds just because the competition is so bad. You don't really get that advantage on Flickr. Also, make sure you don't have a lot of Facebook friends who are photographers :p

Equipment used:

Nikon D3100 | 18-55mm f/3.5-5.6 Nikkor

Samples:

215093_545304523727_52602206_31208316_2921783_n.jpg

207779_545304548677_52602206_31208317_1405797_n.jpg

207423_545304573627_52602206_31208318_3866901_n.jpg

You should look at the stuff bubbabyte shoots, IMO he's got talent for shooting his kids. :p

As for the photos,

here my take:

1 and 2. Under-exposed

3. Is the best but the car in background ruins it.

I was unfortunately taking pictures into a sunset in late afternoon. I was also under shade, which caused some variable lighting conditions. Any tips on how to expose correctly in that situation? I was already wide open as far as aperture goes, I guess I could have stepped up the ISO.

3 was tough because it originally was super over exposed, having the frikin sun in the background and all. Took some post-processing to get the subjects right in that one.

Here's my favorite of the set. A little dark, too, but it still came out nice. And plz2ignore the drool :p

216414_545304603567_52602206_31208319_1587228_n.jpg

I was unfortunately taking pictures into a sunset in late afternoon. I was also under shade, which caused some variable lighting conditions. Any tips on how to expose correctly in that situation? I was already wide open as far as aperture goes, I guess I could have stepped up the ISO.

You don't mention your shutter speed, but I am guessing it was near the limit of what would be acceptable until introducing blur from camera shake... If not, then your two options to add more light would be:

1. lower shutter speed

2. increase ISO (as you mentioned)

Don't be afraid of increasing ISO... When I first got my DSLR my camera was NEVER above ISO 200 (note this was my first ever camera)... then after 2 months I realized that was stupid of me... Sure, if you can, keep it as low as possible, but I get usable shots at 1600 with my D90.

If I recall correctly you are shooting in manual, so in this situation try and make sure the meter is more towards the "plus" by changing the variables I mentioned above... In addition you can experiment with various exposure weight options (can't recall the official name). For example, use spot metering opposed to an overall image average, this way you can get the correct exposure on your subject without having strong lighting in the background (or where ever else) effect your camera's metering.

Well, it's usually easier to shoot with the sun in front and not in the back, which is what happened in the first two pictures, your camera meters for the light in the back and not on the faces.

Try shooting S or A, M can be a handful for beginners (aperture, shutter + exposure )

Also, what quality are you shooting at? You photos have a weird softness to them.

Also, what quality are you shooting at? You photos have a weird softness to them.

He shoots RAW for the most part, I noticed this too... I immediately dismissed it as being a byproduct of using a kit lens...

To add to this, what kind of post-work did you do (or what program did you run it through to convert from RAW to .jpg)?

In addition you can experiment with various exposure weight options (can't recall the official name). For example, use spot metering opposed to an overall image average, this way you can get the correct exposure on your subject without having strong lighting in the background (or where ever else) effect your camera's metering.

I really haven't touched the metering settings yet. I know technically what they do, but I'm just mastering on-the-fly manual settings of A, S, and ISO, so I'll get to that eventually I guess.

Well, it's usually easier to shoot with the sun in front and not in the back, which is what happened in the first two pictures, your camera meters for the light in the back and not on the faces.Try shooting S or A, M can be a handful for beginners (aperture, shutter + exposure ) Also, what quality are you shooting at? You photos have a weird softness to them.

He shoots RAW for the most part, I noticed this too... I immediately dismissed it as being a byproduct of using a kit lens...To add to this, what kind of post-work did you do (or what program did you run it through to convert from RAW to .jpg)?

Ya, this is in RAW. When I first sit at the PC, I put the photos in NXview. With RAW, NXView does magical things with WB settings. It's made some so-so shots look gorgeous. I also use that to convert to Jpeg. Keep in mind these are facebook uploads, so i don't know if that takes away quality in and of itself.

I went through the 30 day trial of Lightroom, and I really enjoyed it. Unfortunately, it ain't cheap. I might be able to squeeze a licence out of my company for photoshop CS5 (for "business" use, and being in IT, I really could just install the thing and be done with it), but the chances of that are slim. I can't stand the Gimp UI, and I don't really know of anything else that works well and is free. The WB and Picture Settings in NXViewer are great tools, though. For basic photo editing, it does the job for free.

My typical editing process is:

- Tweak WB.

- Up the contrast a bit (personal preference here. I like my images a little contrasty)

- Boost the saturation a bit. I tend to oversaturate, and you can see that in some of the photos above.

Ya, this is in RAW. When I first sit at the PC, I put the photos in NXview. With RAW, NXView does magical things with WB settings. It's made some so-so shots look gorgeous. I also use that to convert to Jpeg. Keep in mind these are facebook uploads, so i don't know if that takes away quality in and of itself.

Facebook applies their own algorithm to the photos uploaded, which IMO makes the majority of my shots look worse than when viewed through flickr (look into starting an account there)

I was going to suggest LR, but since you already know of it...

Facebook applies their own algorithm to the photos uploaded, which IMO makes the majority of my shots look worse than when viewed through flickr (look into starting an account there)

I was going to suggest LR, but since you already know of it...

http://www.flickr.com/photos/60484419@N06/

I use it also, but most of my friends and family won't see that stuff, so I'm forced to use facebook.

You don't mention your shutter speed, but I am guessing it was near the limit of what would be acceptable until introducing blur from camera shake... If not, then your two options to add more light would be:

1. lower shutter speed

2. increase ISO (as you mentioned)

Don't be afraid of increasing ISO... When I first got my DSLR my camera was NEVER above ISO 200 (note this was my first ever camera)... then after 2 months I realized that was stupid of me... Sure, if you can, keep it as low as possible, but I get usable shots at 1600 with my D90.

+1

FYI: Most shots where the exposure is off by +/- 1 EV or less can be easily corrected in Lightroom with minimum quality loss.

+2

http://www.flickr.com/photos/60484419@N06/

I use it also, but most of my friends and family won't see that stuff, so I'm forced to use facebook.

Meh facebook :/

Also, I think the default windows photo viewer has a couple of editing options.. Though I would try to squeeze that CS5 out of your company, nothing beats proper tools :)

I was browsing through your flickr account and most pics are sharp, so yeah, it's probably facebook algorithm.

Also Auto-WB on nikon is usually really good, I tend not to mess with WB unless under artifical lighting (fluorescent or incandescent )

Also, see how everyone days only good things about nikon :p ! Don't believe it! Lies I tell ya! Lies! But surely enough, that's what C & C is about, improving!

The only recommendation I can make when it comes to shooting pictures of children is...get down to their level.

Don't shoot down; kneel down and shoot straight.

+1000, generally applies to all subjects.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • So for the last few days, and excuse me if I'm not posting in the correct place... anyway, for the last few days I have been getting constant login approval requests from Microsoft Authenticator. I thought maybe someone was trying to get in so I changed my password and backup info... it did stop for a bit after, but now, it's back. I've had maybe 10 today alone. I check the history and there is nothing there.... under my recent activity it just lists my login to view the page, and my last login attempt which I signed into Outlook on my phone on June 18. What is going on? It's asking me to 'type in the code' that's displayed on my screen. I'm not doing it! Anyone else? Anything I should dig deeper into?
    • Hello police? I'd like to report a murder.
    • Ventoy 1.1.15 is out.
    • Win11Debloat 06.24.2026 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 06.24.2026 changelog: With this release, the legacy app list generator and CustomAppsList file support is removed. This only affects users using legacy command-line methods. More info here: #664 Features & Improvements Clean up styling to better match Windows fluent design guidelines by @Raphire in #638 Add GPO override warning alert and WhatIf dry-run previews by @HetCreep in #611 Disable telemetry-related scheduled tasks under Microsoft\Windows by @HetCreep in #615 Guard against loading, saving & executing undefined features by @Raphire in #665 Simplify Window management & update minimum window sizes by @Raphire in #671 Update start menu backup/restore with timestamped filenames by @Raphire in #672 Clean up feature execution logic for readability by @Raphire in #641 Clean up & improve app removal methods, remove legacy CLI app removal methods by @Raphire in #662 Remove support for CustomAppsList file format, including -RemoveAppsCustom and -RunAppsListGenerator parameters Update CLI app removal to use newer app removal methods Drop support for sunset apps (Fitbit, Shazam, Twitter, Viber, Wunderlist, XING) and Plex Fix removal of Microsoft Copilot Fixes Fix: Replace P/Invoke dynamic DLL imports with WPF native methods to fix temp DLL access-denied errors by @Raphire in #661 Fix Start Menu apps not being set correctly for all users when running script for other user by @Raphire in #637 Fix store suggestions not getting disabled correctly for all users when running as other user by @Raphire in #642 Fix: Respect Feature min/max version for comboboxes by @Raphire in #639 Fix: Don't treat AllUsers/CurrentUser as a username at startup by @HetCreep in #647 Fix: treat dismissed unsafe-removal confirmation as decline by @HetCreep in #651 Fix: Surface runspace errors instead of swallowing them in GUI mode by @HetCreep in #655 Fix: Correct sub-key path matching in backup allow-list validation by @HetCreep in #645* Fix: Detect WinGet uninstall failures by exit code, not English text by @HetCreep in #658 Fix: Detect installed OneDrive in the "Only show installed" filter by @HetCreep in #656 Download: Win11Debloat 06.24.2026 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      416
    2. 2
      +Edouard
      173
    3. 3
      PsYcHoKiLLa
      125
    4. 4
      Michael Scrip
      77
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!