app to lock an android device to a specific mobile network?


Recommended Posts

Our situation;

The current mobile operator we use (Network Norway) does not currently have it's own network in the northern parts of Norway, and the service-software we use requires an all-time data connection.

This results in us having to enable data while roaming, to enable data over the Telenor's mobile network.

Our problem;

One of our offices work close to the Finnish/Russian border, and sometimes the signal strength is higher from mobile networks in these countries, or Telenor is not available at all.

Many does not notice this, and this results in....big bills :p

My Question;

Is there any app for lock an android device to a specific mobile network? I've tried searching, but I can't find anything, not in market or anyplace.

There is an option with all mobile devices to set the network selection to manual. Select Telenor from the options, then when you go somewhere where Telenor cannot be found you just have to select a different service provider.

I never have my phone set to automatic for exactly the reason you mentioned.

  On 26/04/2011 at 07:24, Intrinsica said:

There is an option with all mobile devices to set the network selection to manual. Select Telenor from the options, then when you go somewhere where Telenor cannot be found you just have to select a different service provider.

I never have my phone set to automatic for exactly the reason you mentioned.

they are instructed to do this, but still the bills keep on coming :p

Best of all would be if there were a "policy" bit we could set:p

  On 26/04/2011 at 07:35, morphen said:

they are instructed to do this, but still the bills keep on coming :p

If that were happening here despite us having told them what to do and how to do it, we would send them the bill.

How would you get around this? You can't mass-distribute an application to all devices without physically downloading the app to each device. So then you would have to either do it yourself, or get the employees to each do it. If the employees get left to do it then you'll still be in the same position (they won't) and if you have to do it to each device yourself then you may as well just use the phone's option to prevent automatic switching of networks.

  On 26/04/2011 at 07:49, Intrinsica said:

If that were happening here despite us having told them what to do and how to do it, we would send them the bill.

How would you get around this? You can't mass-distribute an application to all devices without physically downloading the app to each device. So then you would have to either do it yourself, or get the employees to each do it. If the employees get left to do it then you'll still be in the same position (they won't) and if you have to do it to each device yourself then you may as well just use the phone's option to prevent automatic switching of networks.

The office can use Android central management , like : ubi-Suite Android mobile management and others.

  On 26/04/2011 at 07:21, morphen said:

The current mobile operator we use (Network Norway) does not currently have it's own network in the northern parts of Norway, and the service-software we use requires an all-time data connection.

This results in us having to enable data while roaming, to enable data over the Telenor's mobile network.

  On 26/04/2011 at 08:12, Grepus said:

Just disable data roaming, this will stop all data connectivity whilst not on your home network. Go to Settings > Wireless & Networks > Mobile Networks and de-tick "Data Roaming".

That won't work.

I don't have an Android device anymore, but doesn't it have some kind of setting that enables roaming in-country only? I remember seeing something like it on my Android...

  On 26/04/2011 at 08:12, Grepus said:

Just disable data roaming, this will stop all data connectivity whilst not on your home network. Go to Settings > Wireless & Networks > Mobile Networks and de-tick "Data Roaming".

Won't work, seeing as Network norway only has a native/their own network in southern parts of norway, in the rest of the country they use Telenor's network...so we are roaming :p

  On 26/04/2011 at 07:49, Intrinsica said:

If that were happening here despite us having told them what to do and how to do it, we would send them the bill.

How would you get around this? You can't mass-distribute an application to all devices without physically downloading the app to each device. So then you would have to either do it yourself, or get the employees to each do it. If the employees get left to do it then you'll still be in the same position (they won't) and if you have to do it to each device yourself then you may as well just use the phone's option to prevent automatic switching of networks.

We have a service on the subscriptions now, that blocks all data traffic on foreign networks when they reach 500NOK in costs.

But; the problem is; sometimes Telenor has no coverage and/or they drive through Finland, they need to connect to a foreign network:p

  On 26/04/2011 at 12:57, morphen said:

We have a service on the subscriptions now, that blocks all data traffic on foreign networks when they reach 500NOK in costs.

But; the problem is; sometimes Telenor has no coverage and/or they drive through Finland, they need to connect to a foreign network:p

Ok, so let me just see if I have this right.

Your current system allows them to use a foreign provider for data up to 500NOK (80CHF here). The problem is that because of how close they are to the border, they sometimes move over to a foreign provider without needing to, meaning that they hit their 500NOK quota without intending on doing so?

So you want an application that denies them access to different networks when they are in one location, but when they move through to another location (passing through Finland, for example) you want it to automatically allow them to switch?

If that's right, it sounds like you want an application that bases a change of network upon their geographical location rather than just signal strength. If they are at the office it denies them the ability to change, but once they are out of the office it will allow them but only if Telenor isn't available.

That sounds like a pretty specific application. :laugh: Have you considered hiring an Android app developer to make it for you? He could even create it so that it could be sold to others, by providing options such as "Which location do you want to lock?" "Which networks should the phone switch to once outside of the location?" and so on.

  On 26/04/2011 at 13:14, Intrinsica said:

Ok, so let me just see if I have this right.

Your current system allows them to use a foreign provider for data up to 500NOK (80CHF here). The problem is that because of how close they are to the border, they sometimes move over to a foreign provider without needing to, meaning that they hit their 500NOK quota without intending on doing so?

So you want an application that denies them access to different networks when they are in one location, but when they move through to another location (passing through Finland, for example) you want it to automatically allow them to switch?

If that's right, it sounds like you want an application that bases a change of network upon their geographical location rather than just signal strength. If they are at the office it denies them the ability to change, but once they are out of the office it will allow them but only if Telenor isn't available.

That sounds like a pretty specific application. :laugh: Have you considered hiring an Android app developer to make it for you? He could even create it so that it could be sold to others, by providing options such as "Which location do you want to lock?" "Which networks should the phone switch to once outside of the location?" and so on.

Hehe, ok, I'll lay out what I think would be optimal;

I don't want a forced setting controlled from the main office.

Optimal would be; A switch-widget where the standard setting would be "locked to native network" or somthing like that, and when you hit it, you would allow the phone to connect to other networks.

I guess I'll have code the thing myself...but first I need to learn java :p guess the best thing would be to hire someone...or beat some sense it to our employees ;)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • qBittorrent 5.1.1 by Razvan Serea The qBittorrent project aims to provide a Free Software alternative to µtorrent. qBittorrent is an advanced and multi-platform BitTorrent client with a nice user interface as well as a Web UI for remote control and an integrated search engine. qBittorrent aims to meet the needs of most users while using as little CPU and memory as possible. qBittorrent is a truly Open Source project, and as such, anyone can and should contribute to it. qBittorrent features: Polished µTorrent-like User Interface Well-integrated and extensible Search Engine Simultaneous search in most famous BitTorrent search sites Per-category-specific search requests (e.g. Books, Music, Movies) All Bittorrent extensions DHT, Peer Exchange, Full encryption, Magnet/BitComet URIs, ... Remote control through a Web user interface Nearly identical to the regular UI, all in Ajax Advanced control over trackers, peers and torrents Torrents queueing and prioritizing Torrent content selection and prioritizing UPnP / NAT-PMP port forwarding support Available in ~25 languages (Unicode support) Torrent creation tool Advanced RSS support with download filters (inc. regex) Bandwidth scheduler IP Filtering (eMule and PeerGuardian compatible) IPv6 compliant Available on most platforms: Linux, Mac OS X, Windows, OS/2, FreeBSD qBittorrent 5.1.1 changelog: BUGFIX: Don't interpret wildcard pattern as filepath globbing (glassez) BUGFIX: Fix appearance of search history length spinbox (glassez) BUGFIX: Remove dubious seeding time max value (glassez) BUGFIX: Fix ratio handling (glassez) BUGFIX: Fix compilation with Qt 6.6.0 (glassez) WEBUI: Make General tab text selectable by default (dezza) WEBUI: Add versioning to local preferences (Chocobo1) WEBUI: Make multi-rename search & replace fields use a monospace font (Atk) WEBUI: Fix wrong replacement sequence in IPv6 string (Chocobo1) WEBUI: Fix memory leak (bolshoytoster) WEBUI: Fix path autofill in set location and new category (tehcneko) RSS: Mark matched article as "read" if it refers to a duplicate torrent (glassez) WINDOWS: Update command line help message (KanishkaHalder1771) WINDOWS: NSIS: Don't require agreement on the license page (Chocobo1) LINUX: Fix preview not opening on Wayland (Isak05) LINUX: Add fallback for random number generator (Chocobo1) Download: qBittorrent 5.1.1 | Portable | ~40.0 MB (Open Source) Download: qBittorrent 64-bit installer (qt6) | 41.7 MB Links: qBittorrent Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Linus Torvalds releases a pretty ordinary Linux 6.16-rc3 by Paul Hill Linus Torvalds, the head and founder of the Linux kernel, has announced the release of Linux 6.16-rc3. This release comes with fixes for new features that were introduced during the merge window several weeks ago, and for old features where issues have been detected or improvements need to be made. If you remember last week, Torvalds said that rc2 seemed smaller than usual, putting it down to people going on vacation. He said this week’s rc3 seems to be in the usual ballpark for this time of the cycle, so everything looks “entirely normal.” In terms of changes, this release is “dominated” by wireless networking and GPU driver updates, however, Torvalds doesn’t think that anything really huge stands out this time. While nothing stands out Torvalds urged people to carry on testing and submitting patches. This update saw improvements to the core system and architecture. There have been improvements to ARM64 KVM that improve stability and correctness of virtualizations on ARM64. There are also improvements to RISC-V KVM and Trust Domain Extensions (TDX) for Intel which expand and secure virtualization capabilities on those architectures. On the graphics front, there are fixes for the amdgpu and amdkfd drivers that fix job handling, engine resets, display corruption, and power management features. The driver used for Qualcomm’s Adreno GPUs has been updated to improve fault handling, display timing, and driver binding. The open-source Nouveau (Nvidia) driver has been updated with fixes for GSP message queue references, potential integer overflows, buffer size adjustments, and a use-after-free bug. Finally, the Intel i915 driver has been updated to address early wedge issues, memory initializations, and build errors. There are also improvements to Wi-Fi devices (ath12k and iwlwifi), sound (ALSA), power management on AMD, and file system improvements (OverlayFS, EROFS, XFS, NFS, SunRPC). Linux 6.16 is due for release at the end of July and will then be picked up by Linux distributions, which will be the first interaction most end users have with the new features in this update. The main benefit of a newer kernel is that Linux will work on newer hardware, so if you’ve had issues with Linux, be sure to try it periodically in case your hardware is now supported.
    • Technically, it should be account-bound after activating it
  • Recent Achievements

    • Week One Done
      urbanmopdubai1 earned a badge
      Week One Done
    • One Month Later
      Jim Dugan earned a badge
      One Month Later
    • First Post
      Johnny Mrkvička earned a badge
      First Post
    • Week One Done
      viraltui earned a badge
      Week One Done
    • One Month Later
      serfegyed earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      646
    2. 2
      Michael Scrip
      226
    3. 3
      ATLien_0
      219
    4. 4
      Steven P.
      150
    5. 5
      Xenon
      145
  • Tell a friend

    Love Neowin? Tell a friend!