app to lock an android device to a specific mobile network?


Recommended Posts

Our situation;

The current mobile operator we use (Network Norway) does not currently have it's own network in the northern parts of Norway, and the service-software we use requires an all-time data connection.

This results in us having to enable data while roaming, to enable data over the Telenor's mobile network.

Our problem;

One of our offices work close to the Finnish/Russian border, and sometimes the signal strength is higher from mobile networks in these countries, or Telenor is not available at all.

Many does not notice this, and this results in....big bills :p

My Question;

Is there any app for lock an android device to a specific mobile network? I've tried searching, but I can't find anything, not in market or anyplace.

There is an option with all mobile devices to set the network selection to manual. Select Telenor from the options, then when you go somewhere where Telenor cannot be found you just have to select a different service provider.

I never have my phone set to automatic for exactly the reason you mentioned.

  On 26/04/2011 at 07:24, Intrinsica said:

There is an option with all mobile devices to set the network selection to manual. Select Telenor from the options, then when you go somewhere where Telenor cannot be found you just have to select a different service provider.

I never have my phone set to automatic for exactly the reason you mentioned.

they are instructed to do this, but still the bills keep on coming :p

Best of all would be if there were a "policy" bit we could set:p

  On 26/04/2011 at 07:35, morphen said:

they are instructed to do this, but still the bills keep on coming :p

If that were happening here despite us having told them what to do and how to do it, we would send them the bill.

How would you get around this? You can't mass-distribute an application to all devices without physically downloading the app to each device. So then you would have to either do it yourself, or get the employees to each do it. If the employees get left to do it then you'll still be in the same position (they won't) and if you have to do it to each device yourself then you may as well just use the phone's option to prevent automatic switching of networks.

  On 26/04/2011 at 07:49, Intrinsica said:

If that were happening here despite us having told them what to do and how to do it, we would send them the bill.

How would you get around this? You can't mass-distribute an application to all devices without physically downloading the app to each device. So then you would have to either do it yourself, or get the employees to each do it. If the employees get left to do it then you'll still be in the same position (they won't) and if you have to do it to each device yourself then you may as well just use the phone's option to prevent automatic switching of networks.

The office can use Android central management , like : ubi-Suite Android mobile management and others.

  On 26/04/2011 at 07:21, morphen said:

The current mobile operator we use (Network Norway) does not currently have it's own network in the northern parts of Norway, and the service-software we use requires an all-time data connection.

This results in us having to enable data while roaming, to enable data over the Telenor's mobile network.

  On 26/04/2011 at 08:12, Grepus said:

Just disable data roaming, this will stop all data connectivity whilst not on your home network. Go to Settings > Wireless & Networks > Mobile Networks and de-tick "Data Roaming".

That won't work.

I don't have an Android device anymore, but doesn't it have some kind of setting that enables roaming in-country only? I remember seeing something like it on my Android...

  On 26/04/2011 at 08:12, Grepus said:

Just disable data roaming, this will stop all data connectivity whilst not on your home network. Go to Settings > Wireless & Networks > Mobile Networks and de-tick "Data Roaming".

Won't work, seeing as Network norway only has a native/their own network in southern parts of norway, in the rest of the country they use Telenor's network...so we are roaming :p

  On 26/04/2011 at 07:49, Intrinsica said:

If that were happening here despite us having told them what to do and how to do it, we would send them the bill.

How would you get around this? You can't mass-distribute an application to all devices without physically downloading the app to each device. So then you would have to either do it yourself, or get the employees to each do it. If the employees get left to do it then you'll still be in the same position (they won't) and if you have to do it to each device yourself then you may as well just use the phone's option to prevent automatic switching of networks.

We have a service on the subscriptions now, that blocks all data traffic on foreign networks when they reach 500NOK in costs.

But; the problem is; sometimes Telenor has no coverage and/or they drive through Finland, they need to connect to a foreign network:p

  On 26/04/2011 at 12:57, morphen said:

We have a service on the subscriptions now, that blocks all data traffic on foreign networks when they reach 500NOK in costs.

But; the problem is; sometimes Telenor has no coverage and/or they drive through Finland, they need to connect to a foreign network:p

Ok, so let me just see if I have this right.

Your current system allows them to use a foreign provider for data up to 500NOK (80CHF here). The problem is that because of how close they are to the border, they sometimes move over to a foreign provider without needing to, meaning that they hit their 500NOK quota without intending on doing so?

So you want an application that denies them access to different networks when they are in one location, but when they move through to another location (passing through Finland, for example) you want it to automatically allow them to switch?

If that's right, it sounds like you want an application that bases a change of network upon their geographical location rather than just signal strength. If they are at the office it denies them the ability to change, but once they are out of the office it will allow them but only if Telenor isn't available.

That sounds like a pretty specific application. :laugh: Have you considered hiring an Android app developer to make it for you? He could even create it so that it could be sold to others, by providing options such as "Which location do you want to lock?" "Which networks should the phone switch to once outside of the location?" and so on.

  On 26/04/2011 at 13:14, Intrinsica said:

Ok, so let me just see if I have this right.

Your current system allows them to use a foreign provider for data up to 500NOK (80CHF here). The problem is that because of how close they are to the border, they sometimes move over to a foreign provider without needing to, meaning that they hit their 500NOK quota without intending on doing so?

So you want an application that denies them access to different networks when they are in one location, but when they move through to another location (passing through Finland, for example) you want it to automatically allow them to switch?

If that's right, it sounds like you want an application that bases a change of network upon their geographical location rather than just signal strength. If they are at the office it denies them the ability to change, but once they are out of the office it will allow them but only if Telenor isn't available.

That sounds like a pretty specific application. :laugh: Have you considered hiring an Android app developer to make it for you? He could even create it so that it could be sold to others, by providing options such as "Which location do you want to lock?" "Which networks should the phone switch to once outside of the location?" and so on.

Hehe, ok, I'll lay out what I think would be optimal;

I don't want a forced setting controlled from the main office.

Optimal would be; A switch-widget where the standard setting would be "locked to native network" or somthing like that, and when you hit it, you would allow the phone to connect to other networks.

I guess I'll have code the thing myself...but first I need to learn java :p guess the best thing would be to hire someone...or beat some sense it to our employees ;)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Maybe you don't realize this...but everything you said agreed with me. Yes, many tech outlets reported on Ryzen 9000 issues prior to 24H2, which I already addressed, and as I already said, that issue only existed for a few short months. Ryzen 9000 was released the same quarter of 2024 as 24H2. So again...months, not years. I also already said 24H2 showed some minor improvements on older Ryzen CPU. The article you posted agrees with me, and even says the improvements were only 3-5%, which is even more harsh a statement than what I said. If you want to fuss on the 3-5% numbers, then yes, I will grant you that was an issue for an extended amount of time. In my opinion, that is such a small amount it isn't worth fussing over, but you are welcome to a different option. However, if that was your point, then you didn't make that point in good faith, because you highlighted Ryzen 9000 so much, which had a FAR bigger and FAR shorter issue, it's really a very different conversation.
    • The vast majority of users do not care which iOS version they're using. They don't even know or bother updating to the latest version, unless they see the prompt. The version numbers is more for the power users and I don't think Apple renamed their OS for them.
    • No operating system works well with programs that modify its interface. There will always be bugs, whether it's MacOS or Linux. Windows too, you'll only suffer from bugs using this crap software.
    • KDE brings UI improvements, bug fixes and more to Plasma 6.4 as stable release draws near by David Uzondu With less than a month to the release of Plasma 6.4, the KDE dev team has shared what it has been working on in the latest issue of its weekly roundup. The update shows a heavy focus on user interface polish and a whole slew of bug fixes as the June 17 release date gets closer. The team has pushed a number of UI refinements for the upcoming version. On the System Settings page for Wi-Fi, the network list can now be fully navigated with a keyboard. KDE also disabled the ability to drag and drop displays on top of one another in the monitor settings. This was done because it could create unsupported arrangements that triggered a cascade of strange bugs throughout the system. Waking up a sleeping computer by pressing the power button no longer causes the bizarre logout screen to appear after you unlock it, which is a relief. Alignment issues in the settings page for the Digital Clock widget were also resolved. The list of bug fixes for 6.4 is extensive. The development team has fixed the most common crash affecting the System Monitor and squashed another one related to a divide-by-zero error. For users with multiple monitors, a long-awaited fix has landed that prevents windows from disappearing when the screen they are on gets disconnected. Even the humble Sticky Notes widget received attention; it will no longer freeze the Plasma shell if you place it on a very thick panel. Discover, the software center, also had a bug patched that caused it to crash if closed too quickly after launch. Here's the full list of improvements: Putting a Sticky Note widget on a very thick panel can no longer cause Plasma to freeze; now, you can use a thick panel with a sticky note on it as a notes sidebar. Fixed the most common System Monitor crash. Fixed another crash in System Monitor, this time a divide-by-zero. Fixed a case where xdg-desktop-portal-kde could crash after you choose a video source to start streaming. Fixed a bug that caused Discover to crash if you close it immediately after it launched. Fixed multiple subtle bugs with the screen chooser widget and OSD that caused it to do the wrong thing on rotated screens or when mirroring screens. Fixed a bug that caused the System Settings’ search field not to be focused properly when pressing Ctrl+F while any UI elements in a settings page already had focus. Fixed the root cause of multiple issues involving windows disappearing when you disconnect the screen they’re on. Clicking a button on a desktop widget that opens a menu no longer inappropriately makes the widget enter Widget Edit Mode. Files with a # or ? character in their name or full path are no longer unexpectedly missing from the history lists in Kicker/Kickoff/etc launchers. Fixed a bug that caused the screen chooser window to sometimes not appear as expected when OBS was launched. Fixed a bug that caused tiled windows on a multi-screen setup to lose their tiling settings when the system went to sleep and woke up again. The "Move window to [activity]" feature now works properly when invoked from the Task Manager widget. Fixed a bug in the Kicker Application Menu that caused keyboard navigation not to work if the popup opened with an item under the pointer. In the Overview effect’s grid view, dragging windows tiled on one virtual desktop over to a different virtual desktop now keeps them tiled as expected. The focus may be on the imminent 6.4 release, but work on what comes next never really stops. Looking ahead, development on Plasma 6.5 is already well underway. Just last week, the KDE team brought several performance improvements to Plasma 6.5.0. This week, the team fixed a nagging bug that sometimes caused the Networks widget to think a hotspot was still enabled after disconnecting from Wi-Fi. On the features side, the System Settings' Fonts page now prevents you from breaking your system entirely by setting fonts below 4pt. In addition to that, switching time spans in the Info Center’s energy page now features smooth graph animations. Performance-wise, kwriteconfig should also be faster, allowing changes you made to the keyboard layout using the tool to reflect immediately.
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +FloatingFatMan
      252
    3. 3
      snowy owl
      252
    4. 4
      ATLien_0
      228
    5. 5
      +Edouard
      191
  • Tell a friend

    Love Neowin? Tell a friend!