Is There Any Way To Show That An Issue Has Been Resolved?


Recommended Posts

I see a lot of threads where people are asking for advice with hardware or software and usually the good folks here on Neowin help the OP to get their problem sorted but once it has been resolved people keep replying to the thread with more and more advice. I know that really people should read through the whole topic before replying to take any extra info into account or to see if it has been resolved but sometimes threads have multiple pages of replies and if you are in a rush but want to give advice then you don't always have time to read through it all.

I was just wondering if there was any way to allow the OP of a thread in software/hardware help forums to be able to add a [resolved] tag to the front of the thread title after the edit period has run out, this would also make it easier for people with similar problems who are looking for help as they would know the thread is not going to be a dead end.

Thoughts?

  • Like 2

I think this would be a good idea

even if there was a button that added [Resolved[ tot he start of the topic title and closed the thread

I think this would be a good idea

even if there was a button that added [Resolved[ tot he start of the topic title and closed the thread

Yeah that's what I was thinking, either next to the edit button or the edit button could be replaced by it when the edit period had run out.

This is a pretty good idea. The only issue is that many people offer their opinions or some more useful information on the subject even after the question is resolved, and adding [Resolved] to the title might discourage that.

Next version of IPB has a best answer feature built in, doubt Neowin will upgrade for quite a while though.

http://community.invisionpower.com/blog/1174/entry-8192-ipboard-34-dev-update-best-answer-feature/

I really don't mind other advice in those threads, because sometimes some really good advice is given but like you, I would like to see it marked Solved, so everyone would know not to keep replying to the original problem.

Next version of IPB has a best answer feature built in, doubt Neowin will upgrade for quite a while though.

http://community.inv...answer-feature/

I think that would be the best solution, so that people don't keep answering the question over and over again, but contribute to the discussion. Also so that other people would know where the answer is if they have the same question.

A tag would serve nicely to mark the issue as solved.

3.4 will come with a "best answer" vote feature which will mark topics as solved, we'll be upgrading to it (I hear it will release at the end of the year). :)

  • Like 2

3.4 will come with a "best answer" vote feature which will mark topics as solved, we'll be upgrading to it (I hear it will release at the end of the year). :)

Awesome :D Glad to hear you're doing the upgrade, quite a few nice features from what I've read :)

It's a good idea, but can we not have the option to close the thread? I've learned some great things here over the years from people that have started their posts with, "I know your problem has been solved, but here's some handy tips..."

If posters get given the option to close the thread when their question is answered, these responses will not happen.

I will never support threads being closed when they're resolved. I've seen many examples of "solved" threads being used for a related issue as well ;)

  • Like 3
This topic is now closed to further replies.
  • Posts

    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂
    • "This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time" ... Lol.
    • This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time by Sayan Sen Recently we covered a really good deal on an AMD RX 9070 three-fan model that's available at slightly above its MSRP. If you are looking for a GPU for 1440p gaming that's around the performance of the Nvidia RTX 5070 you should most definitely check it out. Let's say that you are looking for a monitor to pair that up with too. The Samsung 49" G9 curved QD-OLED superultrawide is a good option that can provide an immersive experience. However despite being a very good deal currently (at $855), it may seem unaffordable to you, or you may simply not want to spend as much on a monitor. In that case Dell's S2725QS can be a very good option as it's on sale at the moment for its lowest price in over six months (purchase link under the specs table down below). The big highlight of the Dell S2725QS is its 27-inch IPS panel with a 3840 x 2160 (4K UHD) resolution, offering a high pixel density that can make text appear sharper while also providing plenty of screen space for productivity and media consumption. The display supports a refresh rate of up to 120Hz through both HDMI and DisplayPort, making it suitable not only for everyday desktop use but also for smoother gaming and scrolling. AMD FreeSync Premium support is included as well, helping reduce screen tearing during gaming sessions. The screen has fairly good brightness and color accuracy so you can use it for general work purpose, though photo/video editing is probably not going to be the best match for this. The technical specs of the Dell S2725QS are given in the table below: Specification Value Viewable Screen Size 27 in (68.58 cm) Screen Mode 4K UHD Maximum Resolution 3840 × 2160 Maximum Preset Resolution 3840 × 2160 @ 120 Hz Standard Refresh Rate 120 Hz Panel Technology In-plane Switching (IPS) Backlight Technology LED Edgelight System Pixel Density 163 PPI Response Time 8 ms GTG, 5 ms GTG, 4 ms GTG Horizontal Viewing Angle 178° Vertical Viewing Angle 178° Brightness 350 cd/m² (nits) Native Contrast Ratio 1500:1 Color Support 1.07 Billion Colors Color Gamut 99% sRGB (CIE 1931) Adaptive Sync AMD FreeSync Premium HDCP Support Yes Mount Type Panel Mount VESA Mount 100 × 100 mm Maximum Height Adjustment 13 cm Tilt -5° to 21° Swivel -30° to 30° Pivot ±90° Stand Adjustments Tilt, Swivel, Height, Pivot Glass Hardness 3H Horizontal Frequency 27–270 kHz (DisplayPort 1.4 / HDMI 2.1) Vertical Frequency 48–120 Hz (DisplayPort 1.4 / HDMI 2.1) Video Inputs 2 × HDMI 2.1 (HDCP 1.4 & 2.3), 1 × DisplayPort 1.4 (HDCP 1.4 & 2.3) Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C Operating Humidity 10%–80% (Non-condensing) Storage Humidity 5%–95% (Non-condensing) Get it at the link below: Dell S2725QS 27-inch 4K 120Hz IPS monitor: $218.49 (Sold and Shipped by Amazon US) (Was: $280) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      241
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      84
    5. 5
      macoman
      64
  • Tell a friend

    Love Neowin? Tell a friend!