Recommended Posts

What can I say, I'm a compulsive buyer :D I've bought the DiNovo for 2 reasons; first being that I had geek lust and was yearning after it for ages and secondly because I'm getting a 7610 so I would have needed to buy a bluetooth adapter anyway. So I figured, why not buy a slightly more expensive bluetooth adapter with a kick ass keyboard and mouse connected! :woot:

Compulsary first photo, awwwwwwwwwww:

DiNovo1.jpg

First impressions:

The first thing that greets you when you open the box is the Media Pad, on first thoughts it felt heavier than the keyboard :| now the batteries are in it's levelled it up a bit but this doesn't mean the Media Pad is heavy, far from it. The keyboard is insanely light :| First test you've gotta do on all keyboards is the creak test, we all do it, where you pick up the keyboard, give it a little twist and a turn to check out the build quality.... Silence... This thing is built like a rock.

The keyboard is extremely thin, unbelievable so "Zero Tilt" design it's called, I just call it Laptop keys :p If you hate typing on a laptop, chance are you'll hate this keyboard too. I myself love the silence, the flatness of it, the travel of the keys, everything; so I love these keys :D

By default the keys along the top are F1, F2 etc; there's a F-Lock key a-la MS keyboards yet I can't imagine this will ever, ever be pressed. I hate the stupid functions like "Reply", "New", "Send" etc, I see no point, they're just there to annoy :pinch:

Setup:

This is a pretty complex kit in what it all does, you've got the keyboard (with all the fancy keys), the Media Pad (again, with said fancy keys ;) ) and the MX900 mouse. Not to mention that the base station doubles as a bluetooth hub. So I was pretty surprised to see I could sit back and just watch the show as it set itself up :D

The base station plugs into a USB port, the Keyboard port and the mains. Stick the battereries in the keyboard and the media pad, Logitech supply 6 x Duracell batteries, the MX900 comes with rechargable batteries like my former MX700. On first boot with it all connected the Keyboard and the Mouse worked fine with no drivers, the Media Pad didn't, instead it politely asked me to "Install my software" (written on it's LCD screen) which was pretty cute, so I headed on over to the Logitech website. Now the software for the DiNovo desktop is called "Setpoint" it's not a particulary attractive application but it certainly gets the job done and it does it well.

Upon installation of the software all devices are disconnected, it then proceeds to install all your drivers with the Windows "Add New Hardware" wizard appearing in the backgrond every now and again. The first time it appeared it was waiting for me to click next, I got into a bit of a panic but it timed out and proceeded to search for drivers :rofl: You're prompted to press connect on the mouse then the base station then when it's confirmed it's connected and the BT address you have to click on a chain, then again with the keyboard you connect then you have to type a 4 digit number and press enter (this is to confirm the BT address and authenticate the BT device). Finally you do the same with the Media Pad, 4 digit number then enter (with a cool prompt on the screen :D ) When it's all connectec you're ready to configure the software.

Setpoint:

My personal opinion is that the software is reasonably ugly, I've seen far better designed applications but thankfully it's a good little app :happy:

DiNovo10.jpg

The mouse section offers all the functionality of the MouseWare software I used with my MX700 so I'm pleased as punch :happy: Now, I've never owned a Logitech keyboard, my last was a MS wireless keyboard. Gladly the keyboard software matches up to the Mouse section, full customisability (if that's a word :p ) every button can be assigned to anything, absolutely quality.

DiNovo11.jpg

The Media Pad is a little different, it has the same ablities to be customised as the keyboard and mouse but it has an additional section set aside for the unique features offered by the media pad:

DiNovo12.jpg

As you can see from the screenie there's quite a cool selection of features, recieving messenger notifications and emails on the pad is pretty cool. I dunno how useful it is but hey, I'm a geek :D Seeing "Redmak has just signed in" appear on the LCD is cool :cool:

The Media Pad supports e-mail notifications, messenger info (it tells you when someone signs in and when tey type a message), ID3 info, so when you're playing songs of movies it displays track information and has a seek bar showing you the progress. It has a calculator function so it's a kinda flash, overpriced bluetooth calculator :D Cool thing is when you do sums and crap on it it copies the result to the clipboard in windows so you can quickly work something out and paste it right in. And of course theres's the media controls such as next, previous, stop, play/pause, volume up and down and mute. It also has basic navigation by selecting the NAV key, you have your regular up, down, left and right; but you also have additional functions, back and forward for internet browsing (works flawless in Firefox), Start button, Open and Close. So there's quite a bit this little Media Pad can do.

DiNovo13.jpg

The software works well with everything I've tried with it so far, unfortunately iTunes track info doesn't display on the LCD, only WMP9 so I'm a bit gutted but perhaps another driver release will fix that. Time for some pictures :woot:

DiNovo3.jpg

DiNovo4.jpg

DiNovo5.jpg

DiNovo6.jpg

DiNovo8.jpg

DiNovo9.jpg

To top it off, my new Workstation photo :woot:

WorkstationNew.jpg

Link to comment
https://www.neowin.net/forum/topic/166171-logitech-dinovo/
Share on other sites

that looks like a very nice keyboard

its got the same suspend button as my logitech, i find it too tempting to play with, keep putting my pc into suspend and crashing it :(

are you left handed?

just asking cos you put the numpad on the left

i would find it annoying on that side, or are you just doing it cos you can?

Link to comment
https://www.neowin.net/forum/topic/166171-logitech-dinovo/#findComment-2092937
Share on other sites

good review Dazzla.

i would really like this set.. but IMO.. it's not worth that price :no:

i already have a bluetooth dongle.. and i think the screen on the numpad is not something like :woot: .. i mean when you are using the keyboard.. your are sitting behind your pc.. and if you change a song you WILL see it on your screen :p

but other then that.. this thing looks great.. i really like the laptop keys.. soon im getting a keyboard to match my coolermaster preatorian.. maybe the coolermaster q-board it self.. :shifty:

Link to comment
https://www.neowin.net/forum/topic/166171-logitech-dinovo/#findComment-2098066
Share on other sites

Got it for ?147.99 from Overclockers.co.uk. The set hasn't had any problems reconnecting on startup, all seems hunky dory. I stuck the pad on the left just cause I could:DD What problems do you have wih Firefox X@vier?

Well the problems only occur when the logitec software is running:((

1) the scroll wheel doesn't work (to open links in new tabs)

2) the go button on the keyboard doesn't work

3) the back/forward buttons on the mouse don't work

if u find a fix for it plz let me know;))

thnx

P.S.

I have no problems with IE :wacko::

Link to comment
https://www.neowin.net/forum/topic/166171-logitech-dinovo/#findComment-2098122
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
    • OK so SearXNG is a meta search engine that you can install locally or use via a public instance. It scrapes other search engines which you choose and then sorts the results. Not as complicated as multiple relays
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!