UK ISP BT Offers up to 76Mbps Superfast Broadband Boost for Free


Recommended Posts

I'm on BT Infinity and whilst my problems aren't as bad as yours, I agree that their router is a joke. The WiFi just randomly decides to stop working about 3 times a day, and the whole connection (wired too) drops daily requiring a reboot. >_<

Yea I got rid of the Home Hub 3.0 after about a week of getting weird router crashes everynight around the same time, replaced it with my own and rarely goes down now

Do you have that Huawei HG612 Openreach modem (not the router, the VDSL modem).

They're known to fail in this way and as such have been replaced by newer 2B and 2V revisions (Should be sticker on the back which says if you have a 2x revision) and also Openreach are now providing modems manufactured by ECI (Although I think this depends on whats in the cabs rather than because of the Huawei's failing).

They get notoriously hot. Even the two newer versions aren't exactly reliable unfortunately.

Just checked mine, its the 2B and doesn't seem to have any problems

What happens to the speeds when you plug directly into the modem, bypassing the router? I think you need to set it up as a PPPoE connection, although as you've changed the router you'll know the settings yourself.

If you get the same poor speeds I'd bet your modem has started to fail.

What happens to the speeds when you plug directly into the modem, bypassing the router? I think you need to set it up as a PPPoE connection, although as you've changed the router you'll know the settings yourself.

If you get the same poor speeds I'd bet your modem has started to fail.

I tried it quickly once and couldn't connect but I might have had a static Internal IP set on the PC so it would have been on the wrong range, I guess your PC would be given an external IP if it worked

Doesnt sound like a very safe thing to do though

All you're doing is removing the router. As long as your firewall is up and running then it's just removing a potential piece of faulty equipment. If his speeds are still low then its either a fault with the 612 (Google HG612 overheating) or a problem on the line - both of which Openreach have to sort out.

As Paul says, he went off to restart the router. When he did another speed test, the results were still poor. To me, it's looking like its not more the router at fault but his actual internet connection.

It's like back when ADSL first came out, you pretty much needed an ADSL modem and a separate router as combo devices were rare and expensive. If there was only one computer in the house, you could plug the modem directly into it. No need for an internal network etc.

All you're doing is removing the router. As long as your firewall is up and running then it's just removing a potential piece of faulty equipment. If his speeds are still low then its either a fault with the 612 (Google HG612 overheating) or a problem on the line - both of which Openreach have to sort out.

It's like back when ADSL first came out, you pretty much needed an ADSL modem and a separate router as combo devices were rare and expensive. If there was only one computer in the house, you could plug the modem directly into it. No need for an internal network etc.

What acts as a DHCP server though? Your ISP ?

Do you have that Huawei HG612 Openreach modem (not the router, the VDSL modem). They're known to fail in this way and as such have been replaced by newer 2B and 2V revisions (Should be sticker on the back which says if you have a 2x revision) and also Openreach are now providing modems manufactured by ECI (Although I think this depends on whats in the cabs rather than because of the Huawei's failing). They get notoriously hot. Even the two newer versions aren't exactly reliable unfortunately.

Just checked now - it's the HG612 here as well. Best bet is to replace it then, right?

shame there is no date for my exchange. My county will be getting 90% FTTC/FTTP by the end of 2014 but my 20mb virgin cable will do me until then, getting free upgrade to 60mb hopefully in july. I hope BT reduces the cost of FTTC in the near future as it is around ?30 inc phone line for the cheapest FTTC from any ISP as a result of BT charging ISP loads. Yet i can get 30mb virgin cable for ?22.50 ish, fttp is too pricey at the moment.

One restart later, and here are my results from both:

Date of Speed Test: 2012-04-11 16:45:54 Download Speed: 680 kbps (85 KB/sec transfer rate) Upload Speed: 6828 kbps (853.5 KB/sec transfer rate)

1888354051.png

Ridiculous, to be honest. I've had nights where it's absolutely silky smooth as well, which makes it even more frustrating to me.

Check the IP Profile for your line and post back with details - http://www.speedtester.bt.com/ (click the "Fibre to the Premises Diagnostics" under Note 2).

A stuck IP Profile with low download speeds usually indicates a fault due to line noise or restarting the modem/router quite frequently on your end (which also shows your local exchange there is instability), contact BT to reset it and/or get them to sort you out a new router.

Once they do, it can take up to 3 weeks to get the maximum speed for your line (providing there are no other issues).

Check the IP Profile for your line and post back with details - http://www.speedtester.bt.com/ (click the "Fibre to the Premises Diagnostics" under Note 2).

A stuck IP Profile with low download speeds usually indicates a fault due to line noise or restarting the modem/router quite frequently on your end (which also shows your local exchange there is instability), contact BT to reset it and/or get them to sort you out a new router. Once they do, it can take up to 3 weeks to get the maximum speed for your line (providing there are no other issues).

I got 3.67MB. Still not good, but it's an improvement. I checked with my mum and we'll see about getting a replacement for the current HG621 we have in the house as well. If there's a new router too, that'd be great.

I've just placed an order for this BT product. The house I'm in is a new build and not to mention the cab is less than 100metres, so I'm hoping to get nearly the full speed. I'll find out next Thursday (the 19th) any ways. :)

Been on the 40/10 (sorry, 38/9 as BT are now forced to advertise it as...) Infinity package for months now with no problems - had full speed since the day it was installed and no downtime. Was on Virgin 50 meg at the time but it was diabolical in this area so I moved to VDSL. I'll certainly be renewing my contract for the extra speed tomorrow. Should see at least 70Mbit out of it given how far I am from the FTTC cab.

Yea that's what I thought, not going to help if the openreach modem is the problem though

It narrows it down to it being the modem rather than the router though. Its only a method of fault finding - its not any form of fix if that's what you thought I meant!

Been on the 40/10 (sorry, 38/9 as BT are now forced to advertise it as...)

I wondered why they'd stopped using 40!

Aww. Still stuck on 6mbps/448kbps :(. Guess that's what you get for living with a tiny amount of exchange subscribers.

My whole internet life I was always on a crappy slower than 90% of anyone connection no matter where I lived, it has only been a few months since I finally got FTTC

Kinda makes up for all those years of hair pulling to get a huge upgrade twice in 12 months

Why not, I'm not going with any other ISP while BT are providing these sorts of speeds, quite happy to renew

That's fine if you're happy with BT but not everyone wants to be stuck on a contract for internet. To be honest, I don't even know why there is such a thing as a contract for internet access - what exactly are you paying off?

I was a BT Broadband customer years ago when they offered unlimited ADSL. I wasn't effected but I saw a lot of people stuck when BT changed their terms of service and introduced download limits - all the people on contracts were stuck with nowhere to go. I've been considering BT Infinity because the speeds look so good but I really don't want to end up stuck with BT because they're dodgy, unreliable, overpriced and their customer service is the worst I've ever had to deal with. Seeing them force users to extend their contracts just to take advantage of network improvements is not the sort of thing that makes me want to switch.

I've been with Be* for the last few years. They don't have contracts (you just have to give them a month's notice I think), they offer things like static IP addresses as standard and their customer service is top notch. The only problem is, they don't have any clear plan to migrate to fibre-optic any time soon :angry:

That's fine if you're happy with BT but not everyone wants to be stuck on a contract for internet. To be honest, I don't even know why there is such a thing as a contract for internet access - what exactly are you paying off?

I was a BT Broadband customer years ago when they offered unlimited ADSL. I wasn't effected but I saw a lot of people stuck when BT changed their terms of service and introduced download limits - all the people on contracts were stuck with nowhere to go. I've been considering BT Infinity because the speeds look so good but I really don't want to end up stuck with BT because they're dodgy, unreliable, overpriced and their customer service is the worst I've ever had to deal with. Seeing them force users to extend their contracts just to take advantage of network improvements is not the sort of thing that makes me want to switch.

I've been with Be* for the last few years. They don't have contracts (you just have to give them a month's notice I think), they offer things like static IP addresses as standard and their customer service is top notch. The only problem is, they don't have any clear plan to migrate to fibre-optic any time soon :angry:

Yea contracts suck in general, but I'm not planning on moving house any time soon and not planning on leaving BT so it really doesn't make much difference to me atm

But I get where you are coming from, the only reason I can think of contracts is for when they actually have to install equipment your end or they could spend millions doing that every day only for the customer to leave them 1 month later and keep all the gear

Yea contracts suck in general, but I'm not planning on moving house any time soon and not planning on leaving BT so it really doesn't make much difference to me atm

But I get where you are coming from, the only reason I can think of contracts is for when they actually have to install equipment your end or they could spend millions doing that every day only for the customer to leave them 1 month later and keep all the gear

Yes, I presume BT argue that the contract covers the cost of the modem/router. Of course, nobody actually wants these and I can't think of the last time I ever used an ISPs hardware. Be* expect you to give them the router back when you leave them (or charge you for it if you don't return it) which I think is fair and much better than being stuck on a contract.

BT also make you sign contracts for landlines despite the fact that they're not supplying any hardware and they force you to renew the contract if you ever try to switch packages. I think they're just taking the p*ss to be honest and I know they use it as an excuse to lock you in and charge you extra if you ever want to change anything.

Anyway, hopefully everything will work out for you with BT :) In the meantime, I need to make a list of pros and cons to see whether I can stomach returning to BT.

Anyway, hopefully everything will work out for you with BT :) In the meantime, I need to make a list of pros and cons to see whether I can stomach returning to BT.

Thanks, well I have to say since getting FTTC I haven't had an ounce of bother with them, their ADSL package is a joke though, constantly resetting routers and emailing and calling them to try get something working, but the lines are old, so no wonder FTTC is more or less problem free, it has removed 95% of the copper line from the equation

Thanks, well I have to say since getting FTTC I haven't had an ounce of bother with them, their ADSL package is a joke though, constantly resetting routers and emailing and calling them to try get something working, but the lines are old, so no wonder FTTC is more or less problem free, it has removed 95% of the copper line from the equation

That's good to know. My ADSL connection gets really unstable in Autumn and Spring as the temperature shifts (weird, I know :)) and it would be nice to have a stable connection. I just wish BT offered static IP addresses on their consumer packages because I could accept the customer service problems if I didn't have to find workarounds and alternatives to the things I do now. BT Business plan prices are steep when all you want is a static IP address.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • They have lots of info on me, I have a facebook account and have done so for years, it was the thing to have then. My phone number is not on it. I don't have the Facebook app on my phone these days, just the messenger part, and only for a couple of people to contact me, most will text me via SMS or phone. I agree, Meta, like others, even without an account will know something about me. Just have to try and keep some things private Also, never saw the need for Whatsapp, people used to ask for me to join it, but as I said to them, I have SMS and a phone, use that, or email
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      271
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!