Recommended Posts

Budget is about $2500

I am currently looking at:

Panasonic VIERA TC-P55VT50 (currently $2300 @ Amazon.com)

http://www.amazon.com/Panasonic-VIERA-TC-P55VT50-55-Inch-Plasma/dp/B00752VKTG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1355770070&sr=1-1&keywords=TC-P55VT50

Samsung UN55ES8000 (currently $2300 @ Amazon.com)

http://www.amazon.com/Samsung-UN55ES8000-55-Inch-1080p-Silver/dp/B00752NJMC/ref=sr_1_2?s=electronics&ie=UTF8&qid=1355770044&sr=1-2&keywords=samsung+es8000

Sony BRAVIA KDL55HX850 (currently $2278 @ Amazon.com)

http://www.amazon.com/Sony-BRAVIA-KDL55HX850-55-Inch-Internet/dp/B006U1VGNS/ref=sr_1_3?s=electronics&ie=UTF8&qid=1355764394&sr=1-3&keywords=sony+55+inch+led+tv

This TV will replace a Samsung LN-52A650, its the main living room so light cannot be controlled 100% during the day. My first choice is the Panasonic as I have never owned a plasma and would love to experience the "true colors" I always read about. I don't have any real feature requirements as I havent used any of the "apps" built into my bluray player (netflix, youtube, hulu, etc). Am I missing anything in the decision process? Going again today to Bestbuy to look at them but I always feel like showrooms dont do any justice to actual home use picture..

Link to comment
https://www.neowin.net/forum/topic/1126320-purchasing-a-new-tv/
Share on other sites

noticed the first one is a plasma... I've had plasma before, and it makes a good bit of heat and uses drastically more electric then LCD take that into consideration also and I've had plasma and better quality LCD side by side, the color difference isn't really noticable

I've had plasma before, and it makes a good bit of heat and uses drastically more electric then LCD

Agreed, Plasma always had me worried about heat (its hot where I live), and I definitely 'felt' the electricity bill go abnormal after my purchase, sold as second hand after 2 months, got a Bravia, cant be more happy, but do look at its remote, its a very bad design and hurts the thumb if you like holding the remote like me.

Agreed, Plasma always had me worried about heat (its hot where I live), and I definitely 'felt' the electricity bill go abnormal after my purchase, sold as second hand after 2 months, got a Bravia, cant be more happy, but do look at its remote, its a very bad design and hurts the thumb if you like holding the remote like me.

my first plasma used almost 500 watts with the screen changing quickly, and got very hot, they got the wattage down some but its still a lot compared to a LED backlit LCD screen, my largest LCD screen only uses 80 Watts

LED is the way to go, but if you're on a budget, then go Plasma, but LCD is no good.

Plasma is a really nice picture for the price that's for sure. You can pretty much get 2 Plasmas for the price of 1 LED.

And like someone stated, Plasma is really hard on electricity.

Going better to worst would be... 4K, LED, Plasma, LCD.

But it also depends on the size you want. You could get a pretty big Plasma for the budget you stated, so if you want size over quality, get the Plasma.

Well I am pretty much limited to 55" due to my entertainment center, possibly 60" if it has little to no bezel.

The "Enery Guide" tag from Amazon says it costs $24 yearly

http://g-ecx.images-...PDFs/55VT50.pdf

not sure how accurate that is.

I dont think I am too concerned with electricity... I do hate the heat (I have my AC going as soon as temps hit high 70s/low 80s) so that may be a drawback for me.

So for right now I am most interested in picture quality above all else.

LED is the way to go, but if you're on a budget, then go Plasma, but LCD is no good.

Plasma is a really nice picture for the price that's for sure. You can pretty much get 2 Plasmas for the price of 1 LED.

And like someone stated, Plasma is really hard on electricity.

Going better to worst would be... 4K, LED, Plasma, LCD.

But it also depends on the size you want. You could get a pretty big Plasma for the budget you stated, so if you want size over quality, get the Plasma.

4K? Seriosuly?.... talk about waste of money right now and for years from now

The Samsung suffers from quite a bit of backlight bleeding/clouding compared to the Sony (in general, every panel is different). Both will do pretty well with the right settings. For the Samsung that'd be the "Movie" preset, for the Bravia you should be using the Cinema1 or Cinema2 preset with the color balance on the Warm2-preset (if you're not calibrating).

Personally, I'd go with the Sony here.

Also, those are some enormous tv's. Everyone in my family has a 32" and a 40" TV would be regarded HUGE :p

Also, those are some enormous tv's. Everyone in my family has a 32" and a 40" TV would be regarded HUGE :p

I think 50" is the average here (at least with friends and family I know). I have a 46" in our bedroom (never used), a 42" in my daughters playroom (finally getting used to watch Elmo and other kids shows) and the 52 Samsung which will be donated to my dad once I get my new TV.

Thanks for the info on backlight bleeding, I was hoping that was a thing of the past as it seemed to be the biggest issue (even on the high end models). Does plasma suffer from any sort of bleeding or halo issues (I am assuming no due to the tech used)?

While I have a Samsung LN55C630, and would recommend another Samsung LCD TV to another, I'd say to go with the Sony. Just because of how much better it can possibly "connect" with future purchases. Get a PS3 or PS4 (when it comes out) and it could have special functions alongside the TV. Same with your receiver and other devices that will all be connected to each other.

Both are great though. Picture quality is amazing on both of those displays, and which ever way you go, you will be happy and it will be a great upgrade. But choose either Sony or Samsung.

I think 50" is the average here (at least with friends and family I know). I have a 46" in our bedroom (never used), a 42" in my daughters playroom (finally getting used to watch Elmo and other kids shows) and the 52 Samsung which will be donated to my dad once I get my new TV.

Thanks for the info on backlight bleeding, I was hoping that was a thing of the past as it seemed to be the biggest issue (even on the high end models). Does plasma suffer from any sort of bleeding or halo issues (I am assuming no due to the tech used)?

Backlight bleeding for the most part should be a thing of the past. If you do get one with some, return it. But most sets now are very very minimal if existant.

Plasma suffers from nothing at the moment, except higher electric bills :p

While I have a Samsung LN55C630, and would recommend another Samsung LCD TV to another, I'd say to go with the Sony. Just because of how much better it can possibly "connect" with future purchases. Get a PS3 or PS4 (when it comes out) and it could have special functions alongside the TV. Same with your receiver and other devices that will all be connected to each other.

Both are great though. Picture quality is amazing on both of those displays, and which ever way you go, you will be happy and it will be a great upgrade. But choose either Sony or Samsung.

Backlight bleeding for the most part should be a thing of the past. If you do get one with some, return it. But most sets now are very very minimal if existant.

Plasma suffers from nothing at the moment, except higher electric bills :p

plasma is drastically easier to break too, the weight of the screen's glass can break itself it not moved right, the larger the screen the easier it can crack itself unfortuniatly... that and the heat.. which can case more wear on the inverters it uses to power the screen... it has to jump the voltage up like a CRT does to power the screen and the inverters that do that can die in heat if it gets to hot

Right now a plasma (unless it's a really high-end one) isn't interesting anymore. The cons outweigh the pros.

I've read reviews of people (in Dutch) moving from a Panasonic plasma to that exact Sony TV saying they were surprised with the excellent colour reproduction and contrast of the Sony.

What Bluray player do you have? Sometimes it's nice to keep those in the same brand to avoid CEC-issues. Sony devices communicate nicely what they are and you can basically use your TV's remote to control everything pretty nicely. It also works across brands, just usually not as good/complete.

I have a plasma and it's true they are power hungry and get pretty warm, but my biggest complaint so far is glare. The glass screen reflects light so badly, every window or light shows up on the screen. It's great at night of course, but that's another thing to consider. I believe they've improved in the last few years with anti-glare coatings though.

I happen to own a Viera, they do get hot, the, power consumption I really haven't noticed the difference in my electric bill, but that's not to say they're low power units, I was warned about that when I bought mine, tho I would like to recommend the panasonic, as it blows my 42 inch Sony Bravia away for picture quality.

I would ask you this tho, out of which ever TV you choose to buy, would you consider doing something similar to what I did...

That is, buy the older model and get the extended warranty, that way if it breaks on you, you get the Newer model of identical size and spec, and save some money.

(as I live in the UK I know UK warranties agencies do that)

While I am getting a warranty, the VT50 has been on the market for a good amount of time so I expect there to be a new model released in the coming months (perhaps shown at CES in Jan?).

Amazon is running a deal right now for $500 gift card with the purchase so that usually means clearing stock.

@ Ambroos - I have a few bluray players... (PS3, 3d Sony, and a 3d Panasonic) - everything goes through a receiver so I havent run into any handshake issues and rarely use the CEC features since my primary remote is the one for my cablebox. Going to read some more reviews on the Samsung/Sony LEDs and also check out some of the plasmas from Samsung before I order.

Thanks everyone for your input so far.

  • 3 weeks later...

Just to update/close out the thread. I ended up purchasing the Panasonic VT50 55". TV was delivered on the 26th by Amazon and it has exceeded my expectations in every way. I think I will def get the calibration done once I have passed my 100 hours of break in. I cant imagine the picture getting that much better but I want to get the most out of this tv. Only bluray I checked out so far was Finding Nemo and it looked incredible, I have yet to check out 3d as I dont feel like shelling out an extra $120 on 2 pairs of glasses (even though I have 30+ 3d blurays).

This topic is now closed to further replies.
  • Posts

    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ah. La Fontana De Incontinentia ! Bella ! Bella !
    • Hi everyone, I'm planning a small network upgrade and was wondering how others prepare their networks for future needs. Do you usually invest in higher-speed switches and better cabling from the start, or do you upgrade only when necessary? I'd be interested in hearing what has worked well for you and any lessons you've learned over time. Thanks!
    • Greetings and welcome!!
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!