Weapons? What do you own?


Recommended Posts

What did you end up getting for her? I'm in a similar situation with my wife. She finds the XDm slide too hard to rack and it won't be good for a self defense scenario for her. I was considering looking at a sub compact XD, but if it is the same then that isn't encouraging.

I just got a double action revolver, a Taurus 605 in .357 magnum.  We share that one though.  When she leaves the house she takes it and most of the time I have my rifle with me, but I'd like to get her a slimmer one in .38 special or something that would be easy to tuck into her pants or something because that what she's asked for because the Taurus, even though it's a small pistol, makes a noticeable bulge in her pants while she's at work.

  • 4 weeks later...

Just traded an old laptop of mine that I wasn't using and a printer to this Harrington & Richardson Topper Model 158, 12 gauge shotgun.  It's a lot like my other, regular Topper model in that it takes both 2 3/4" and 3" magnum shells.  It's a single shot, break action.  This one has definitely seen better days though.  They had the foregrip held on with electrical tape because it was loose, there's no shortage of rust on the outside, lots of powder fouling in the bore, and one spot of surface rust inside the bore I'm gonna try to get out.  It's even got some marring around some of the pins where somebody tried to work on it before without the proper tools.  The action though seems to function just fine, which isn't very surprising given that these guns are incredibly simple and reliable.  The bore looks good for the most part (a little rust) with no bulges or cracks.  The vast majority of its issues appear to be cosmetic.  I've removed the tape and used some solvent to get most of the sticky residue off, I'm gonna see about taking some steel wool to it in the morning to knock off the rest of the rust and then paint it, re-finish the wooden parts, and it'll be a real nice shotgun.  I don't really have a need for it since I already have a Topper model that is in much better condition that I kind of have a sentimental attachment to, but I'll keep it for a rainy day since guns are as good as cash money around here.  Eventually somebody will have something I want, and this shotgun might come in handy as a trade item.  Heck I may even give it as a gift to somebody for Christmas or a birthday or something.  I'm still figuring out exactly what I'm gonna do with it.  Oh well, just thought I'd share.

 

Just brought it in the door here.

post-125978-0-91347100-1391073482.jpg

 

Got it taken apart, finished wiping down the barrel a bit, but I'm tired so I'm going to bed.  I'll work on it some more tomorrow.

post-125978-0-22324300-1391073491.jpg

Grew up in a house full of shotguns and rifles. Don't own one anymore but I'm into chemistry and I have plenty of materials to make things go kablooey. I also own a 150mw green laser. Honestly that scares me more than a gun. It isn't lethal but it will absolutely permanently blind you. :-O

 

Also also a baseball bat and a wooden sword and a full set of golf clubs plus a machete. :D

post-424241-0-72793400-1391123745.jpg

Just got done re-bluing the barrel on that shotgun I picked up the other day (refer to my last post a few places up on this topic).  I just used fine grit sandpaper to gently remove all the rust and get the original bluing mostly taken off until the barrel was totally silver, and then washed it with cold water, patted it dry, then started laying on the Birchwood Casey Perma Blue.  One coat, sit for 60 seconds, rinse with cold water, pat dry, repeat, just like the bottle said.  There's a splotch or two in a place under the foregrip because I ran out of bluing liquid before I got done, since I only had half a bottle left when I started, but I think it looks pretty decent.  At least compared to the rusty mess it was before.  I just kept swabbing the rag up and down it until it was dry to get it as even as I could.  Oh well, it's an old gun, a little bit of splotching in the blue won't kill anybody, :p

 

7P9tWeozAcTMFtl3E20fAp

Hi-Point C9 9mm (works great)

Fired one once and didn't have any problems out of it.  I was surprised since a lot of people talk smack about Hi-Point, but it was a good little pistol.

Going to be assembling two AR's soon, whenever I get the uppers in. 

 

post-435544-0-99324900-1391828147.jpg

 

And this one.

post-435544-0-53242200-1391828247.jpg

 

Ive got one lower on the way i'll be ordering another soon. Can't wait!

 

Not my rifle but  the top upper will look like this when finished except im going to change the butt stock and put a bipod on it. 

post-435544-0-98280900-1391828413.jpg

  • 2 weeks later...

I used to fire a Beretta M9 9mm pistol all the time when I was in the Army.  But until recently I hadn't fired a weapon since 1998.  A month ago I finally bought my first pistol.  A Beretta PX4 Storm Compact 9mm.

 

It fires quite nicely..

11637414565_02d566c34b_c.jpg

 

This is at 10 meters.  Not so shabby for someone that hasn't fired in 15 years.  

1538935_10201896977164847_1812916796_n.j

I used to fire a Beretta M9 9mm pistol all the time when I was in the Army.  But until recently I hadn't fired a weapon since 1998.  A month ago I finally bought my first pistol.  A Beretta PX4 Storm Compact 9mm.

 

 

I love that one. Especially it's grip.

I recently got a good bow, but haven't had a chance to take a picture of it yet.  Have actually never bow hunted, so it will be interesting to give it a shot next deer season.

  • Like 1

Not good enough, does this mean you also hide ugly member of your real family when taking family pics?

 

POST THE GLOCK :angry:

I'm doing a project with it. Well First of all i screwed it up with a duracoat job lol so I took it off sorta lol and ive gave it a grip reduction and im still doing a stippling job on it. the glock is my least favorite gun so i have it as my experiment gun that i dont care about lol.

  • Like 1

I'm doing a project with it. Well First of all i screwed it up with a duracoat job lol so I took it off sorta lol and ive gave it a grip reduction and im still doing a stippling job on it. the glock is my least favorite gun so i have it as my experiment gun that i dont care about lol.

That's ok dude, sometimes, late at night, I pretend I have a .357 Colt Python in my lap and stroke it, then I realise THAT's not a gun I'm stroking. :blush:

That's ok dude, sometimes, late at night, I pretend I have a .357 Colt Python in my lap and stroke it, then I realise THAT's not a gun I'm stroking. 

No I do have a glock im just to embarrassed to show it lol. I do have pics of it in its non molested form though lol.

 

15q9ci1.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      83
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!