New build for photoshop and audio production. Advice please.

By Inzajeano
in Hardware Hangout

 Share

Recommended Posts

Explorer

Inzajeano

Posted
Posted

Greetings to one and all.

I would appreciate your

advice on a new build.

I have a 1800? budget.

The system is primarily for photoshop usage. Working on big scanned negative files of about 350mb size without layers. Also for pro audio production.

I'd like a system that has at let.st 32gb of Ram.

I'm pretty open on anything else.

Look forward to hearing from you.

post-425673-0-02121300-1325966850_thumb.

Mentor

HyBry

Posted
Posted

Welcome to Neowin!

I am sure someone with more time will spec you a build, but just a few questions.

Does the budget include monitor?

How do you feel about overclocking. Is that something that you will do/ might consider/ won't do it?

Explorer

Inzajeano

Posted
  • Author
Posted

Welcome to Neowin!

I am sure someone with more time will spec you a build, but just a few questions.

Does the budget include monitor?

How do you feel about overclocking. Is that something that you will do/ might consider/ won't do it?

Greetings. Budget does not include a monitor. Yes I am keen on overclocking :)

Grand Master

Seahorsepip Veteran

Posted
  • Veteran
Posted

Can't say anything else then **** about this pc in positive way :D

http://www.ebay.com/...em=160712343845

Above build I chose for ya includes:

-Cooler Master Elite 310 (Mid Tower)

-3 x 120mm Blue LED Cooler Master Sickleflow High Performance Fans>eyecandy

-12" Blue Cold Cathode Neon Lighting->eyecandy

-[FREE] Overclock Processor up to 10%

-Level 2 Iron Tundra Liquid Cooling (UV blue colored)

-ASUS P8Z68-V LX [VGA DVI HDMI] SATA 6Gb/s USB3 {4 DDR3 Slots}

-16GB (4x4GB) DDR3 1333MHz

-Nvidia Geforce GTX 560 Ti 1GB (Min. 600 Watt Power Supply)

-Standard 600 Watt, more isn't really needed if you don't add anything else

-1TB 7200 RPM

-Fan-Less Aluminum Silent Hard Drive Cooler with Heatpipes

-NZX Sentry 2 Touch Screen Fan Controller & Temperature Display->TOYS :D

-Internal Wireless N 300Mbps->was forgotten at first :p

-ASUS Xonar DX 7.1->Sound is important in your case

-Life-time U.S. based technical support and customer service by our own in-house technicians

-Standard 3 Years Parts and Labor

And best part of it is: you don't have to build it, some kind of chinese will do it for ya ^^

You can also add custom body paintings if ya like ;)

The software I'll be using us all 64bit hence 32gb. Would this not be useful when working with huge files?

It won't, I've been using extreme pc's with 32gb memory and haven't been able to get past 13/14gb(took me quite some work to get even close to that)

Experienced

RiverCampher

Posted
Posted

The software I'll be using us all 64bit hence 32gb. Would this not be useful when working with huge files?

I totally agree with you, large files can even push 32gb especially in Photoshop. I would also recommend an Nvidia GPU as they support CUDA acceleration.

I recommend an Intel Quad Core CPU. Fastest one you can afford (K variety for overclocking). An i7 would be best if budget allows.

Explorer

Inzajeano

Posted
  • Author
Posted

I totally agree with you, large files can even push 32gb especially in Photoshop. I would also recommend an Nvidia GPU as they support CUDA acceleration.

I recommend an Intel Quad Core CPU. Fastest one you can afford (K variety for overclocking). An i7 would be best if budget allows.

I'm all about the six core i7. I'm looking for a good ssd drive, possibly around 240gb. Water Cooling is an option as I'm keen to o/c!

Grand Master

Seahorsepip Veteran

Posted
  • Veteran
Posted

I totally agree with you, large files can even push 32gb especially in Photoshop. I would also recommend an Nvidia GPU as they support CUDA acceleration.

I recommend an Intel Quad Core CPU. Fastest one you can afford (K variety for overclocking). An i7 would be best if budget allows.

If you got a nvidia videocard(I chose the best in above build) photoshop will use 90% of the time cuda and won't pass even 12gb...

Grand Master

Seahorsepip Veteran

Posted
  • Veteran
Posted

I'm all about the six core i7. I'm looking for a good ssd drive, possibly around 240gb. Water Cooling is an option as I'm keen to o/c!

ssd of such size is very expensive, same build as before but with ssd: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=150732957551

as you see it pushed the prize with nearly 300 usd O.o

Grand Master

Seahorsepip Veteran

Posted
  • Veteran
Posted

http://ironsidecomputers.com/index.php?main_page=product_info&cPath=28201_28202&products_id=40

try building a pc over there, they got hexacore and stuff you want :p

Mentor

HyBry

Posted
Posted

Looks like you will be getting yourself a powerful system.

This will need a good and stable PSU, and for this reason I would stay away from pre-built systems unless you can be sure that the PSU is a quality one.

i7 2700K would be a good choice overall for CPU.

Only other option I would see is going i7 extreme (socket 2011). Price would go up by quite a bit though.

Here is an example of a build:

i7 3930K - 500

Asus X79 mobo - 220

Corsair AX-750 PSU - 150

Case - 100

HDD 2TB - 150

Nvidia GTX560 Ti 448 core edition - 240

Quad channel RAM 16GB - 90

TOTAL = 1450 GBP (I think) Aproximate prices I took from overclockers.co.uk

That should give you 350 for sound card and SSD. I know there is less RAM that you wanted but 32 GB quad channel RAM is way overpriced.

You can save 50+ by going regular GTX 560 Ti.

Same build with i7 2700K would save you close to 300 on CPU and mobo. But someone smarter then me should tell you if it is worth getting i7 3930 based on applications you will be using.

Explorer

Inzajeano

Posted
  • Author
Posted

Thanks HyBry

I'm definitely not going for a pre built system. I already have a soundcard so the question is, on what can I spend the rest of the money on? :)

I would like 32gb of Ram as I'm going 6x9 format with some new work so I'll need it for the huge scanned negatives I'll be working on :)

Mentor

HyBry

Posted
Posted

Thanks HyBry

I'm definitely not going for a pre built system. I already have a soundcard so the question is, on what can I spend the rest of the money on? :)

I would like 32gb of Ram as I'm going 6x9 format with some new work so I'll need it for the huge scanned negatives I'll be working on :)

That is good.

I assume you have all the other 'attachements' as well (keyboard/mouse/etc.) so there won't be any money spent on that.

A 256GB SSD will set you back close to 300. I have not read up on this, so I won't be able to recommend any, just to make sure it is SATA III compatible for best speeds.

As for memory there are couple of options out there i can see. From what I can see on scan.co.uk 32GB quad channel (4 sticks) memory is 220+. (if you go i7 3930K then you would need quad channel, but for i7 2700K dual channel. In reality you will most likely end up with at least 4 memory sticks either way)

16GB quad channel (4 sticks) can be had for around 80-90. Option is to get two of these sets. You will have 8 memory sticks in system. Not sure if this is a bad thing, but just something to keep in mind, and need to make sure motherboard is up for it.

I am sure if you shop around you will find a good deal.

I don't think there is anything special about quad channel, just 4 identical memory sticks as it is with dual channel. This means if you can find a good deal on 16GB dual channel (2 sticks) that should work as well with i7 3930K.

Also there is question of cooling. If you decide to overclock then decent aftermarket cooling would be advisable. There is Corsair H-series closed loop water coolers, or for the same or lower price you can get a good air cooler, Noctua makes some good and quiet ones.

If there is more money you want to spend you can always get a better case or better GPU.

As for cases I like Silverstone/ Fractal design/ Corair cases.

Mentor

HyBry

Posted
Posted

I need some makes and models please dear friends :)

Silverstone RV03 case

Seasonic X-760 PSU or Corsair AX650 - 650W should be OK for you, and it is cheaper. 750W is on an safe side (EDIT: read up a bit and it looks like unless you do a heavy overclock then 650W will should be plenty.)

ASUS P9X79 mobo

GPU brand mostly does not matter, as the card itself is the same. It is warranty and customer support that is different.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • WhatsApp is getting usernames, and you can reserve your preferred one now

      By Fiza Ali · Posted

      WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
    • How do you future-proof a home or small office network?

      By sphbecker · Posted

      When I think about a network, there are really two aspects, the hardware and the wiring. So here is what I would do for both. Wiring: Use Cat6A for the patch panel, outlets, and all structured cables (cables installed in walls). Run plenty of Wireless Access Point (WAP) cables, as a general rule, assume a signal can only pass through 2-3 walls and can't pass through a floor (that is conservative, but trust me on this if you want strong WiFi)  Cat6 patch cables are fine for now if you don't plan to run 10gig, those are easy to replace later if needed. Run OS2 single-mode fiber to anywhere you think you may have a server or sub-switch. (yes, single-mode for everything on a small network, don't mess with multimode unless you have entire racks of servers and that minor module cost and power savings will matter). If you really want to future proof, also run fiber to any high density WAP locations, it is likely that WiFi 8 WAPs will push the limits of 10g. Run 6-12 pairs of single-mode fiber between your MDF and the building's MDF, even if you only need 1 or 2 pairs now, those extra pairs will pay off down the road. Hardware: (its easy to say "get all the features incase you need them", so instead of futureproofing, I am going to take approach of suggesting areas worth investing in, and areas you can save money). Don't overspend thinking you need every feature on every port. You don't need 10g on every port, you don't need PoE on every port. Don't overspend on redundancy either, unless you are ready to buy two of everything, don't waste money buying two of some things and not others. Dual power supplies are worthwhile, but probably not HA or multi-path redundancy.  Get 1 "distribution layer" switch that your router/firewall will connect to as well as all your access layer switches below. This should be a 10g switch with a combination of copper and SPF ports and should be a fully managed switch. Given that you said it is a small network, I suggest also using that distribution layer switch for servers and WAPs, meaning it will need PoE. Speaking of wireless, get good professional tri-band WAPs, and either turn on the band stirring options, or limit 2.4 to an IoT only SSID. This will provide a solid WiFi capable nearly everything but the highest of bandwidth clients...you could even consider skipping wiring workstations depending on usage. Access layer switch for workstations and printers can be cheaper switches, 2.5g is a good sweet spot between price and future proofing, but even 1g is fine for most individual clients (the kind that could probably be fine on WiFi). You can consider saving a little on access layer switches by only getting 1 PoE switch for whatever needs it (remember your WAPs are connecting to the distribution switch, not here), and non-PoE for your workstations, because desk phones are falling out of favor. You can also save money here by not buying managed switches if you don't need them--but really do some soul searching there, if you go this route, then anything that isn't on your workstation VLAN would either need to be connected to the distribution switch, or its own access layer switch. Also, don't feel like you need a fancy fabric stacking switches for your access layer, that is the point of the higher-end distribution layer, to remove the need for things like that at this level. Home Hardware: I'm realizing the above assumed an office setting, if this if for your house and home lab then the above still applies, but you'll probably want everything managed and PoE, just because, but you probably also don't need multiple access layer switches. If your total port count is below 24, just skip separating distribution layer and access layer and just get one nice switch with the features you want. If you are at the point of considering a 48-port switch, I would instead get a nice high-end distribution switch for things that need it, and cheaper access layer switches with specs based on the needs of connected devices. For home use, don't worry about home running every device to the main switch, there is nothing wrong with running sub-switches for your media areas and office, those essentially become your access layer, just look for sub-switches with a 10g uplink so sharing bandwidth isn't an issue.
    • Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers

      By Karthik Mudaliar · Posted

      Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers by Karthik Mudaliar Google's Gemini-powered "Take notes for me" feature inside Google Meet is now available to Google AI Pro and Ultra subscribers. The features work on Google Meet for web as well as on mobile, and Google says that subscribers can use it for meetings they host in many supported languages. As the name suggests, "Take notes for me" allows Gemini to listen to a meeting, generate a summary, identify action items, and save the notes as a Google Doc in the user’s Drive. After the meeting, the organizer receives an email recap with the summary and action items, while the notes can also be attached to the related Calendar event depending on the meeting setup and sharing settings. The feature isn't automatically turned on for everyone, though. Google says that all meeting participants are notified when note-taking is turned on, and users can start it from the pencil icon in Meet or enable it for future calls through Meet’s meeting records settings. For work or school accounts, administrators can also control whether the feature is available and may require explicit participant consent for note-taking, recording, or transcription features. The feature first launched back in 2024, when it was available just for selected Workspace users. Over the years, Google added refinements and more options, including the ability to enable it when scheduling meetings via Google Calendar. Google's support docs say that the feature currently supports English, French, German, Italian, Japanese, Korean, Portuguese, and Spanish, but only one language at a time. Meetings with multiple spoken languages are not currently supported, and Google recommends using the tool for meetings between 15 minutes and eight hours. The new feature makes Google Meet closer to its rivals that have AI tools already built in. Microsoft Teams has recently started offering Copilot and intelligent recap features that summarize meetings, surface highlights, and help with follow-ups, while Zoom’s AI Companion can also generate meeting summaries from desktop and mobile meetings.
    • GnuCash 5.16

      By Copernic · Posted

      GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally launches WSL Containers in public preview

      By David Uzondu · Posted

      Microsoft finally launches WSL Containers in public preview by David Uzondu Microsoft has announced that WSL containers, a feature that allows developers to run Linux containers natively inside Windows without the need for Docker Desktop, is now available in public preview several weeks after Microsoft previewed it at Build 2026. To use the new container feature, you first have to install the latest pre-release version of the Windows Subsystem for Linux by running a quick update command in your terminal: wsl --update --pre-release After installing, you'd get access to the new Linux container CLI (wslc.exe) and the programmable API. Microsoft said that the CLI has a "familiar format" that matches the toolsets developers already use every day. If you know standard Docker commands, your muscle memory will translate directly to wslc.exe, which even features a built-in alias called container.exe. You can quickly run a full Ubuntu KDE desktop container by exposing ports, or pass your graphics card straight into a machine learning environment to run PyTorch workloads. Passing the --gpus all flag inside the run command instantly links your hardware. Image via Microsoft As for the API, developers can now embed Linux container operations directly inside native Windows applications without exposing the command line to users. The team integrated the API directly into MSBuild and CMake, so developers can define container steps directly in project files. Apart from bringing the CLI and API into public preview, Microsoft also said that it's working on a new default file system called virtiofs to speed up file transfer rates between Windows and Linux. Microsoft also introduced an experimental networking mode named consomme, which resolves compatibility issues with corporate VPNs by routing Linux network traffic straight through Windows. One thing to note about WSL containers is that they don't run in your standard WSL distributions; instead, every application and CLI session spawns its own lightweight Hyper-V utility VM in the background. This basically reduces the chances of one app snooping on the container of another app.

  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!