Recommended Posts

You know the menu that pops up when you go to the bottom left corner and right click? Or Win-X? That's going to be revamped and a Shut Down option will make it there too by RC. Right now it's just a crude context list.

Personally, I am fine with Win+I > Shut down.

Just as someone posted before, that if you move the cursor in a rhythmic manner around the bottom right corner, you can get charms bar, same goes for the multi-tasking tab on the upper right (Y)

yes true but realy sucks having 3 screens :-) you know how hard it is for me to get those things lol, wish i could place those things to top of screen and bottom of the screen :rolleyes:

Edit: Just found a way to get those windows on left way without actually going with mouse is just doing windows key+tab

Well, just got done playing with Windows 8 and Windows 8 Server for several hours, and this is my contribution to the subject.

Tip: Microsoft really screwed the pooch on this one from an administrative side. Avoid the OS like it was vista all over again.

Trick: I won't fall for it this time either Microsoft. You got me on Windows ME. You didn't get me on Vista, and you won't get me on this one either. I refuse to support any person that buys this hunk of junk unless it's to format the machine and go back to Windows 7 with the downgrade rights that will be built into the licensing for this.

You know the menu that pops up when you go to the bottom left corner and right click? Or Win-X? That's going to be revamped and a Shut Down option will make it there too by RC. Right now it's just a crude context list.

Personally, I am fine with Win+I > Shut down.

That sounds good to be but where did you hear that from? I think it's a good idea really, that right click menu is more for power users than anything else anyways and the only people tossing a fit over shutdown are the "power users" on here.

Well, just got done playing with Windows 8 and Windows 8 Server for several hours, and this is my contribution to the subject.

Tip: Microsoft really screwed the pooch on this one from an administrative side. Avoid the OS like it was vista all over again.

Trick: I won't fall for it this time either Microsoft. You got me on Windows ME. You didn't get me on Vista, and you won't get me on this one either. I refuse to support any person that buys this hunk of junk unless it's to format the machine and go back to Windows 7 with the downgrade rights that will be built into the licensing for this.

troll-6.jpg

They're not "workarounds", they're shortcuts. The other way of shutting down (using mouse gesture to bring up the charms bar) is perfectly fine, but there are keyboard shortcuts which power users can use to expedite the process.

Technically true. But I think the point of all these posts related to shutting down is that it has become cumbersome to do it in the way that the majority of users are used to. I still want to be able to click Start -> Shutdown - quick, 2-click access to a very commonly used command. I'm not resistant to change if it's an improvement; but clearly this is not.

In order to decrease the title bar height and adjust the fonts for Windows 8 Aero, export the following Registry key from a Windows 7 installation with the settings you want:

HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics

Then import the .reg file into Windows 8. Works like a charm. Caveat: Changing the theme will reset this tweak.

Not sure if this has been mentioned.

I removed a hard drive from one PC to another. Totally different hardware. Windows 8 Discovered this and cleverly rebuilt itself quickly and booted me into windows as if nothing had changed. Nice job MS !!!

I believe Microsoft has, in Win 8, a way of automatically rebuilding the registry and sytems files incase of..tampering, changes, viruses, crashes.

Technically true. But I think the point of all these posts related to shutting down is that it has become cumbersome to do it in the way that the majority of users are used to. I still want to be able to click Start -> Shutdown - quick, 2-click access to a very commonly used command. I'm not resistant to change if it's an improvement; but clearly this is not.

Move your mouse to the lower right corner of the screen, click Settings - Power - Shutdown. It's not that big of a deal. Most people I know don't even shut their PCs down anymore. They just let them sleep.

Move your mouse to the lower right corner of the screen, click Settings - Power - Shutdown. It's not that big of a deal. Most people I know don't even shut their PCs down anymore. They just let them sleep.

Funny how you edited that. Before the edit you said, "It's still two clicks. Move your..." Guess you tried it out for yourself and realized it's now more clicks than before. See what i mean?

I agree that it's not that big of a deal. But it is still a step backwards. And I'm not sure if "most people I know" is a statistically significant population sample. I'm simply pointing out why one common gripe about the CP is valid. It's not like I'm railing the entire build or calling it useless. I like it overall... but the change in how you have to shutdown / restart / switch users is bad.

So, like everyone else this thing is kicking my ass and taking a while to get my head around.

But once you get used to it, its actually quite pleasant.

When I use it, I get the feeling that this is the future. This is how the past was meant to be, but in the past it was done wrong, and now its hard to change old habits.

And this thing will hopefully mean every PC from now on will be touch, and I hope MS makes it mandatory for new PCs to have a touch screen for Windows 8 Certification.

And the iPad is 'todays' way of dealing with a touch screen. Windows 8 is 'the proper' way of dealing with a touch screen.

My new favourite thing to do is to have the Vimeo app running on the sideview with music videos, whilst reading people bitch about Windows 8.

It is so easy that I have trouble imagining this was no possible previously (with aero snap, yes, but that was a 50/50 split, this is much better)

Things I have found;

- that tip for doing the rhythmic action to get to metro apps + charms is invaluable - cheers for that

- when you keep you mouse over the bottom right corner, the aero peek desktop still works

- something I do all the time is drag files from windows explorer to desktop... in Win7 you could do this by holding the files over the show desktop button, then after desktop peak, dropping it on the desktop; this is still possible (much to my relief) by holding the files on the bottom right corner and waiting for desktop peek

- not sure if this has been mentioned (or maybe so obvious that it doesn't need mentioning) but the ESCAPE button is your friend. if you hit the win key, ESC takes you back wherever you were

- if you are in the search view, ESC once closes the side panel, so ESC twice to get back to where you were

- the closest thing to the old "All Programs' menu in Windows 8 is to go to the charms button and NOT click the windows button, but instead click the Search button... this is the equivalent of the All Apps view.

- if you are in a full screen metro app, and you move it to the side, the main area gets left blank. If you click on it, it takes you to the start screen, so you can pick a new app (or, like me just go directly into desktop)

I made a quick search and believe it was not mentioned:

how to name the groups on the metro start page:

1. move mouse down until the scroll bar shows

2. click on the "magnifier" on right of scroll bar

image_279.jpg

3. the start page zoom view appears, right click on the group, the rest is straight-forward.....

image_278.jpg

For those who want easier way to shutdown:

1) Create a shortcut (new->shortcut) on a classic desktop.

2) Direct it to shutdown.exe -s -t 0

3) Put a nice icon on it

4) Pin it on start screen

Here you go, easy shutdown button :)

Or just press the power-button on your computer case. It starts the shutdown process :)

  • Like 3
This topic is now closed to further replies.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!