Recommended Posts

Stronger car brakes, special toilets and even plus sized wheelchairs: The rising cost of America's expanding waistline

The nation's rising rate of obesity has been well-chronicled, but now businesses, governments and individuals are coming to grips with the costs of those extra pounds.

U.S. hospitals are ripping out wall-mounted toilets and replacing them with floor models to better support obese patients.

The Federal Transit Administration wants buses to be tested for the impact of heavier riders on steering and braking. Cars are burning nearly a billion gallons of gasoline more a year than if passengers weighed what they did in 1960.

The additional medical spending due to obesity is double previous estimates and exceeds even those of smoking, a new study shows.

Many of those costs have dollar signs in front of them, such as the higher health insurance premiums everyone pays to cover those extra medical costs. Other changes are coming into the overall scenery as wider seats are used in public places like sports stadiums and bus stops.

The startling economic costs of obesity, often borne by the non-obese, could become the epidemic's second-hand smoke.

Only when scientists discovered that nonsmokers were developing lung cancer and other diseases from breathing smoke-filled air did policymakers get serious about fighting the habit, in particular by establishing nonsmoking zones. The costs that smoking added to Medicaid also spurred action.

More

Link to comment
https://www.neowin.net/forum/topic/1074079-americas-expanding-waistline/
Share on other sites

i do not get why people eat so much. I seen people get 2 value meals and eat it all in one sitting. what is up with that. I only eat a kids meal and feel full.

If you do it once, the next time you do it you don't feel properly full, so you eat to much again.

You get into a habit of eating to much, feeling empty and then eating more.

I had to fight that a while back. Now I am back to feeling full on a happy meal :p It's a good change :)

Replacing those horrible wall mounted toilets with proper toilets seems a good side effect to me tough.

Yeah, wtf is it with all these wall mounted toilets! :whistle: As for your unintentional pun, I presume you were trying to say "though".

What they need is shock collars for anyone that fits the "obese" category.

These collars can be made to detect caloric intake and once it senses they go over a pre-defined amount, they get a 5 to 10 second shot of 50,000 volts.

This just might motivate them to put down ding dongs and ho ho's.

This topic is now closed to further replies.
  • Posts

    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!