Recommended Posts

I purchased at some point last year a wonderfully priced 300GB WD Raptor from a friend, and thought quite myself lucky. In the very recent past however (almost the present), I've been considering buying an SSD drive as a new primary drive (OS, few programs, etc), selling the Raptor to another friend, and using an old WD 160GB 7200 RPM drive for storage space.

I know very little about what to "look for" in an SSD, but my amateur searching has netting me the following result:

http://www.newegg.co...N82E16820148442

Is this a good drive? Will I see a significant improvement from my Raptor?

Thank you all very much! :)

Link to comment
https://www.neowin.net/forum/topic/1079997-finally-joining-club-ssd/
Share on other sites

Horrid write speeds... imho, spend the extra $60 bucks and get http://www.newegg.co...N82E16820167093 which has better writes, and an extra 2 years warranty.

** I should have mentioned in my first post: I'm trying to keep this around $130 or less.

The OCZ Vertex 3 120GB has similar read/write speeds (to that of the Intel) of 550MB/s and 500MB/s respectively, but in a review I read for that drive, it said in "real usage" conditions, the OCZ only had read/write of 450MB/s and 150MB/s. I also read that that had more to do with the SATA controller on the motherboard (my motherboard has an AMD SB850 controller?)

In short, would I be better off going with the OCZ? http://www.newegg.co...N82E16820227706 versus the Crucial?

Almost noon bump~

Also, I did a bit more research and found this: http://www.amazon.com/SanDisk-Extreme-Gb-s2-5-Inch-Drive--SDSSDX-120G-G25/dp/B006EKJCWM/ref=sr_1_1?ie=UTF8&qid=1338107070&sr=8-1

It has better read/write speeds than the Crucial M4, and apparently performs better in real world scenarios than the OCZ (and similar to the Intel 520). Thoughts?

Thanks again

Get the OCZ Vertex 4 which is the Indilinx Everest 2 controller, with the new 1.4 firmware it doubles the write speeds, its also good at random read and writes, the Sandforce 2281 ones like the one you linked too last have terrible random read and write speeds for uncompressible data, youd be lucky to break 200Mb/s. The Vertex 4 does up to 120k IOPS, most of the others are rated at 80k IOPS and under.

Get the OCZ Vertex 4 which is the Indilinx Everest 2 controller, with the new 1.4 firmware it doubles the write speeds, its also good at random read and writes, the Sandforce 2281 ones like the one you linked too last have terrible random read and write speeds for uncompressible data, youd be lucky to break 200Mb/s. The Vertex 4 does up to 120k IOPS, most of the others are rated at 80k IOPS and under.

It doubles the write speeds... from Vertex 3? I wish I knew more about the SSD controllers (and everything else related to SSDs), but from what you said, the Crucial M4 and the SanDisk both have Sandforce 2281 controllers? But in your next post you say the Vertex 4 has speeds near Sandforce 2281. So do I want Sandforce 2281? Thanks!

I'd go with the Crucial M4. They have the best overall value considering price, performance, and reliability. SandForce based disks are known to be less reliable.

That's what I read as well, which is why it was my first choice.

It doubles the write speeds... from Vertex 3? I wish I knew more about the SSD controllers (and everything else related to SSDs), but from what you said, the Crucial M4 and the SanDisk both have Sandforce 2281 controllers? But in your next post you say the Vertex 4 has speeds near Sandforce 2281. So do I want Sandforce 2281? Thanks!

That's what I read as well, which is why it was my first choice.

No, the Vertex 4 with the 1.4 firmware doubles the write speeds from 200Mb/s to 420Mb/s, the random read and write of the Indilinx Everest 2 controller that's in the Vertex is far superior, almost double, what the Sandforce 2281 controllers provide.

No you don't want Sandforce 2281, I was just saying since the 1.4 firmware brings the speeds up to SF-2281 levels there is no point going SF-2281.

You will get nowhere near 500Mb/s random read or write with Sandforce, the speeds are just marketing, you will struggle to get 150-200Mb/s read/write with uncompressible data like games, videos, music, movies.

The Crucial M4 has the Indilinx 2 controller just like the Vertex 4 but doesn't have the firmware update to bring the speeds up to Sandforce levels.

tl;dr - get the Vertex 4.

No, the Vertex 4 with the 1.4 firmware doubles the write speeds from 200Mb/s to 420Mb/s, the random read and write of the Indilinx Everest 2 controller that's in the Vertex is far superior, almost double, what the Sandforce 2281 controllers provide.

No you don't want Sandforce 2281, I was just saying since the 1.4 firmware brings the speeds up to SF-2281 levels there is no point going SF-2281.

You will get nowhere near 500Mb/s random read or write with Sandforce, the speeds are just marketing, you will struggle to get 150-200Mb/s read/write with uncompressible data like games, videos, music, movies.

The Crucial M4 has the Indilinx 2 controller just like the Vertex 4 but doesn't have the firmware update to bring the speeds up to Sandforce levels.

tl;dr - get the Vertex 4.

Ahh, that definitely clears it up, thank you! I'm reading some reviews right now on the Vertex 4, and a few people are complaining about the update from v1.3 to v1.4? I see no reason why updating it should be an issue. Am I right?

Thanks again!

They are complaining because its a destructive update, you will lose all data on the drive.

Oh. Well that shouldn't be a problem for me, since it will either already have the update when I get it (since it was released 5/15), or I can just update it before putting anything on it.

Alright, I guess Vertex 4 it is! Thanks for your help LegendofMart, and thank you everyone else! :)

The Crucial M4 has the Indilinx 2 controller just like the Vertex 4 but doesn't have the firmware update to bring the speeds up to Sandforce levels.

No, m4s controller is from Marvell. And in day to day use the write speed isn't that important, I wouldn't pay a lot more only for that, the m4 is a great reliable SSD. Another alternative: Samsung 830 which in some tests is faster than the Vertex 4.

The Crucial M4 has the Indilinx 2 controller just like the Vertex 4 but doesn't have the firmware update to bring the speeds up to Sandforce levels.

The M4 has a Marvell controller. I have the 128GB M4 as a boot drive - very happy with it.

My bad, the Indilinx 2 is built by Marvell I must have got the wrong end of the stick when I was reading up assuming the M4 Marvell was also Indilinx.

No, m4s controller is from Marvell. And in day to day use the write speed isn't that important, I wouldn't pay a lot more only for that, the m4 is a great reliable SSD. Another alternative: Samsung 830 which in some tests is faster than the Vertex 4.

Technically its not important but why settle for less when the Vertex and M4 are very similarly priced?

Technically its not important but why settle for less when the Vertex and M4 are very similarly priced?

In a word - reliability - Crucial's track record is as good as the most reliable SSD makers. OCZ on the other hand have a reputation that suffered horribly through using SandForce controllers. With the recent price changes, the M4 is a very compelling offering.

In a word - reliability - Crucial's track record is as good as the most reliable SSD makers. OCZ on the other hand have a reputation that suffered horribly through using SandForce controllers. With the recent price changes, the M4 is a very compelling offering.

Hmmm.. I haven't ordered yet, and reading these posts, I'm now beginning to doubt my (admittedly hasty) Vertex 4 choice. Practically speaking, will the read/write difference between the M4 and the Vertex be noticeable in day-to-day usage?

To be honest that can only be answered by someone that has run both in real world scenarios. My view is biased by the fact I have the M4 and that it has been great.

Anyhow, any SSD will be better than pretty much any spinning platter solution including the Raptor.

To be honest that can only be answered by someone that has run both in real world scenarios. My view is biased by the fact I have the M4 and that it has been great.

Anyhow, any SSD will be better than pretty much any spinning platter solution including the Raptor.

Since you have an M4, let me ask you this: do you ever feel that it could be faster? Or is it always as fast as you could imagine for any specific task? Thanks!

It can be faster. Nothing is totally instant and until it is, it can be faster. I am pretty sure there isn't a single SSD in the world that makes things instant. I guess a PCIe based SSD would be better but still not instant.

Also my board is SATA2 so I know I am not using the SSD to even its full potential.

Having said that, it replaced 2x7200rpm Seagate Barracuda's in RAID0 and the machine feels far more responsive than it ever had previously.

I've owned two Crucial M4 drives, one 64GB and one 128GB. I traded the 64GB in with a service plan at MicroCenter for the 128GB drive and I couldn't be happier. Write speeds are supposedly faster (which I never had a problem with before) and I doubled my capacity. Both drives have been reliable and I haven't had a single issue.

The Vertex definitely looks like a great value though, so it's something to consider. I can't recommend it personally though.

It can be faster. Nothing is totally instant and until it is, it can be faster. I am pretty sure there isn't a single SSD in the world that makes things instant. I guess a PCIe based SSD would be better but still not instant.

Also my board is SATA2 so I know I am not using the SSD to even its full potential.

Having said that, it replaced 2x7200rpm Seagate Barracuda's in RAID0 and the machine feels far more responsive than it ever had previously.

I have SATA 3, so getting the M4 will at least net results as good as yours (which you say is quite good). This is encouraging, thanks!

I've owned two Crucial M4 drives, one 64GB and one 128GB. I traded the 64GB in with a service plan at MicroCenter for the 128GB drive and I couldn't be happier. Write speeds are supposedly faster (which I never had a problem with before) and I doubled my capacity. Both drives have been reliable and I haven't had a single issue.

The Vertex definitely looks like a great value though, so it's something to consider. I can't recommend it personally though.

Another positive review for the M4! And yeah, the Vertex is a good value (from what I've read). I just don't want to be one of those unlucky few who have to RMA for one reason or another... then again, the two drives are so similar in price, I feel that if i did get the Vertex, I'd be (supposedly) getting the extra write speeds for free.

Still voraciously reading up on this; a decision shall be reached soon. Thanks again everyone!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hands-on with BOOX Tappy: cute little reading accessory by Taras Buria Page turners are quite popular accessories for e-readers, as they enable a hands-free reading experience, which is particularly useful with large readers featuring 10-inch or larger displays. The BOOX Tappy is a new accessory that was introduced earlier this year, and we took this cute-looking thingy for a spin. The Tappy comes in a small box, with two additional buttons and a user manual. The device is made of glossy green plastic and resembles old appliances from the nuclear age. Material quality is great, and each part feels quite premium. Plastic is high-quality, the switch is nice to flick, and the buttons are not rattly. At the bottom, four rubberized feet prevent slipping when used on a desk. Unfortunately, there are no color options, and the Tappy is only available in green. It looks good, but I wish there were other options as well. There are two removable buttons, an on/off switch, and an LED indicator that displays connection mode, charging status, and more. The buttons resemble those of an old typewriter, with quite a long travel distance and a pleasant clack. In the box, you have four buttons with different icons: heart, coffee, O, and X. You can easily swap buttons by simply pulling them upwards. Tip: buttons come with plastic covers, but they are quite tricky to remove. It is hard to call the Tappy the most ergonomic remote control, but after fiddling with it for a few hours, I managed to find a comfortable hand position. Attaching a lanyard to it can make it more comfortable in use without the fear of dropping it, but unfortunately, the Tappy does not come with one. The Tappy connects via Bluetooth 5.2, and it works in three modes, which you can toggle by pressing and holding both buttons for about five seconds: Reading Mode Multimedia Mode Browsing Mode Next / Previous page Next / Previous Track Up / Down scroll If you pair the Tappy with a BOOX device (I tested it with the BOOX Go 10.5 Gen 2 Lumi), you will get small pop-ups indicating the current mode. Plus, you can customize what each button does when pressed one time, two times, or held for a few seconds. The list of available actions and features you can use is massive, and I like that BOOX lets you map stuff like brightness adjustment, app launching, screenshot-taking, screen rotating, navigation, and more. Note, however, that while you can use the Tappy with other readers, its customization is only available on BOOX devices running firmware version 4.2 and newer. I could not connect the Tappy to my computer (Windows 11 claims a driver error when I try), but it worked with the DuRoBo Krono that I recently reviewed. My Kindle Paperwhite refused to work with the Tappy, though, just like my iPhone. The Tappy uses a non-removable Li-Ion battery, which can be recharged with a Type-C cable. BOOX rates the remote for "weeks of use," and I can say that it indeed has very good battery life. While there are no battery indicators on the remote, you can see the current level in the status bar or in Input settings in the BOOX firmware. After a few days of active use, mine still shows about 95%. Overall, the Tappy left a nice impression. It is well-made, and the integration with BOOX devices is great. I also like that BOOX decided to have some fun with its design and swappable buttons. I cannot say I am a fan of its odd shape, though. Still, I managed to find a way to use it comfortably. And when not in use, it just looks neat sitting on the table doing nothing or serving you as a small clacky fidget. Buy BOOX Tappy - $29.99 on Amazon US As an Amazon Associate, we earn from qualifying purchases.
    • AdGuard Family lifetime deal now only $14.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 91% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $14.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $14.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!