Mountain Lion = ....meh?


Recommended Posts

In this case, he was right though, or you're being dishonest.

I've had Windows 7 since it went RTM. I've used all its new features. You tell me how someone should be using Aero Peek. Because in my opinion hovering your mouse over an application tab and scanning the little window thumbnails that appear is a waste of space and time and looking up at the display as your windows cycle in and out of focus while you move your mouse over the tabs is also a waste of space. Especially if you have multiple screens like I do because if one of the windows you want is not on your main display it doesn't come in to focus on your main display, it comes in to focus on another display that may not be in your direct vision requiring you to move your head.

This isn't a problem for Expose because no matter where your windows are they correlate in the centre and fill up your entire main display making it much easier to select the window you want and in less time.

But if you think I'm using peek wrong then please enlighten me.

  • Like 1

They're sitting on $100billion in cash. They should give something back to the users that made them so damn rich.

Why?

I've had Windows 7 since it went RTM. I've used all its new features. You tell me how someone should be using Aero Peek. Because in my opinion hovering your mouse over an application tab and scanning the little window thumbnails that appear is a waste of space and time and looking up at the display as your windows cycle in and out of focus while you move your mouse over the tabs is also a waste of space. Especially if you have multiple screens like I do because if one of the windows you want is not on your main display it doesn't come in to focus on your main display, it comes in to focus on another display that may not be in your direct vision requiring you to move your head.

This isn't a problem for Expose because no matter where your windows are they correlate in the centre and fill up your entire main display making it much easier to select the window you want and in less time.

But if you think I'm using peek wrong then please enlighten me.

I use Peek on a 2-monitor setup all day and I don't have to move my head to notice that the Window is on a different screen. It may be just the way my monitors are placed. As I said, both ways are not particularly better than the other. In Apple's case, they have some ****ed up multi-monitor support and what you say might be accidental benefit than something intentional.

Why?

I use Peek on a 2-monitor setup all day and I don't have to move my head to notice that the Window is on a different screen. It may be just the way my monitors are placed. As I said, both ways are not particularly better than the other. In Apple's case, they have some ****ed up multi-monitor support and what you say might be accidental benefit than something intentional.

I have three 30" 2560x1600 displays on my desktop system. Turning ones head is kind of a requirement. Expose works great on such a setup, Aero Peek? Doesn't work well at all and is a total waste of time even trying to use it.

I actually use Microsofts intellimouse software to get Expose on Windows because Peek is so worthless even they developed a direct Expose clone.

I have three 30" 2560x1600 displays on my desktop system. Turning ones head is kind of a requirement. Expose works great on such a setup, Aero Peek? Doesn't work well at all and is a total waste of time even trying to use it.

I actually use Microsofts intellimouse software to get Expose on Windows because Peek is so worthless even they developed a direct Expose clone.

That expose thing predates Peek. IIRC it's from Vista era. I don't know why you want to get into stupid who-copie-who stuff. :/

Won't have to move your head if the Window is on another screen in the end anyway?

I will just stop at saying that Expose is not particularly better IMHO. I think I have repeated that one last time now. You can now continue with regularly scheduled program.

Yeah, that's a huge advantage with Microsoft not being hardware vendor (let's hope Asus, Lenovo, et al put out some good tablets and keep it that way). They go out of their way to support backwards compatibility, even when it's to their detriment.

Well software and hardware compatibility are two different things - when Microsoft have broken compatibility such as moving from XPDM to WDDM it was for good reason AND at the very least we've seen Intel provide WDDM 1.1 drivers for the Intel x3100 GPUs where as Apple has abandoned them entirely. *deep breath* End of the day I've enjoyed my decade with Apple but it appears that there are greener pastures with the improved direction Microsoft is heading it - and yes, I do like Windows 8 and Metro.

They're sitting on $100billion in cash. They should give something back to the users that made them so damn rich.

Or at the very least hire another 10000 programmers to fix up long standing bugs that annoy developers and end users.

I thought Word 2004 was definitely better than Word 2003, partly because it also included a lot of features of OneNote as well, while in Office 2003 they were two separate programs.

Since Word 2007 though, I haven't been able to stand 2008 or 2011 because with the mandatory menu bar at the top, there's no way to do the ribbon well, so the UI is completely disjointed.

I'm ok with the lay out - what I am annoyed with is its failure to properly read the system settings - it's a Windows application that has been ported and castrated to the point that the only redeeming feature is the reasonably good compatibility with Office for Windows.

That expose thing predates Peek. IIRC it's from Vista era. I don't know why you want to get into stupid who-copie-who stuff. :/

Won't have to move your head if the Window is on another screen in the end anyway?

I will just stop at saying that Expose is not particularly better IMHO. I think I have repeated that one last time now. You can now continue with regularly scheduled program.

I wasn't getting in to a stupid who copied who thing. I want Windows to have Expose, Microsoft wants Windows to have Expose too that's why they added it to their Retail Mouse software package. I don't care who came up with it, I just want the best system and Expose is the best. Aero Peek is useless to anyone that does serious work on their system. It doesn't use the screens real-estate properly. You either get tiny thumbnails above the task bar that you can look at which are so tiny they are useless or you get the window you have your mouse hovered over highlighted but here is the thing, the task bar is on the centre display but your window you're highlighting may be on another display so you have to become some kind of psychic to move your mouse along thumbnails you can no longer see because your head is pointed at a completely different display looking at which active window just appeared.

The whole design is poor and Expose is much better. All the windows for your app fly out to your main display and you can quickly just click on the one you want. What could be simpler? Uses the whole screen, all the window details are easily discernible. It's so good even Microsoft wrote a version and I'm happy that they did.

  • Like 1

I wasn't getting in to a stupid who copied who thing. I want Windows to have Expose, Microsoft wants Windows to have Expose too that's why they added it to their Retail Mouse software package. I don't care who came up with it, I just want the best system and Expose is the best. Aero Peek is useless to anyone that does serious work on their system. It doesn't use the screens real-estate properly. You either get tiny thumbnails above the task bar that you can look at which are so tiny they are useless or you get the window you have your mouse hovered over highlighted but here is the thing, the task bar is on the centre display but your window you're highlighting may be on another display so you have to become some kind of psychic to move your mouse along thumbnails you can no longer see because your head is pointed at a completely different display looking at which active window just appeared.

The whole design is poor and Expose is much better. All the windows for your app fly out to your main display and you can quickly just click on the one you want. What could be simpler? Uses the whole screen, all the window details are easily discernible. It's so good even Microsoft wrote a version and I'm happy that they did.

isn't that one of the main reasons MS is finally adding multi-monitor taskbar support?

isn't that one of the main reasons MS is finally adding multi-monitor taskbar support?

If it's anything like it has been in the consumer previews then the taskbar is mirrored to all displays. Basically the task bar you have on your middle display is identical to the task bar you get on your other two displays. I don't really think that is better, in my opinion each display should have its own task bar showing only the windows that are on that display. Maybe that is how it will end up in the end when Windows 8 ships but I doubt I'll be upgrading to Win 8 anyway due to Metro. I'm quite satisfied with just having Microsofts version of Expose on Windows 7 to be honest.

If it's anything like it has been in the consumer previews then the taskbar is mirrored to all displays. Basically the task bar you have on your middle display is identical to the task bar you get on your other two displays. I don't really think that is better, in my opinion each display should have its own task bar showing only the windows that are on that display. Maybe that is how it will end up in the end when Windows 8 ships but I doubt I'll be upgrading to Win 8 anyway due to Metro. I'm quite satisfied with just having Microsofts version of Expose on Windows 7 to be honest.

not from what i've seen in the RP, they really refined the multi-monitor stuff between the CP and RP builds

i'm pretty sure each taskbar acts as its own now

If it's anything like it has been in the consumer previews then the taskbar is mirrored to all displays. Basically the task bar you have on your middle display is identical to the task bar you get on your other two displays. I don't really think that is better, in my opinion each display should have its own task bar showing only the windows that are on that display. Maybe that is how it will end up in the end when Windows 8 ships but I doubt I'll be upgrading to Win 8 anyway due to Metro. I'm quite satisfied with just having Microsofts version of Expose on Windows 7 to be honest.

You should really read up on things before jumping to conclusion...

You should really read up on things before jumping to conclusion...

I wasn't jumping to conclusions. The last version of Windows 8 that I used with multiple monitors was the Consumer Preview and it had a mirrored task bar. I clearly stated in my message Consumer Preview not Release Preview.

not from what i've seen in the RP, they really refined the multi-monitor stuff between the CP and RP builds

i'm pretty sure each taskbar acts as its own now

Thank you for reading my message and letting me know about the RP. Unlike some people (BajiRav)

To me, the original implementation of Expos? in 2003 was a revelation ? an absolute stroke of genius. I'm not fully onboard with what they did to it in Snow Leopard (make all windows be the same size) and Lion (arrange windows in groups of stacks), but both the ungrouping of windows as well as windows retaining their size relative to each other seem to be back, so that's a welcome improvement.

  • Like 1

To me, the original implementation of Expos? in 2003 was a revelation ? an absolute stroke of genius. I'm not fully onboard with what they did to it in Snow Leopard (make all windows be the same size) and Lion (arrange windows in groups of stacks), but both the ungrouping of windows as well as windows retaining their size relative to each other seem to be back, so that's a welcome improvement.

Under Mountain Lion it feels a lot like how it did on Panther. Definitely an improvement over the Mission Control of Lion. :)

  • Like 2

I wasn't jumping to conclusions. The last version of Windows 8 that I used with multiple monitors was the Consumer Preview and it had a mirrored task bar. I clearly stated in my message Consumer Preview not Release Preview.

Thank you for reading my message and letting me know about the RP. Unlike some people (BajiRav)

When you are criticizing something (good or bad), the onus is on you to keep updated especially for an ever changing pre-release OS. I meant you to read up on the latest changes to multi-monitor support and should have avoided the jumping part of my past though. That's my bad.

I've had Windows 7 since it went RTM. I've used all its new features. You tell me how someone should be using Aero Peek. Because in my opinion hovering your mouse over an application tab and scanning the little window thumbnails that appear is a waste of space and time and looking up at the display as your windows cycle in and out of focus while you move your mouse over the tabs is also a waste of space. Especially if you have multiple screens like I do because if one of the windows you want is not on your main display it doesn't come in to focus on your main display, it comes in to focus on another display that may not be in your direct vision requiring you to move your head.

This isn't a problem for Expose because no matter where your windows are they correlate in the centre and fill up your entire main display making it much easier to select the window you want and in less time.

But if you think I'm using peek wrong then please enlighten me.

You're a fringe case. I have no comment on using 3 screens, but most people don't have more than 1, and most people have small screens as they have netbooks and laptops. For a single screen inside 15", Peek is far more useful than Expose.

Under Mountain Lion it feels a lot like how it did on Panther. Definitely an improvement over the Mission Control of Lion. :)

That's good news. I can see some advantages to the Lion method, particularly if every app supports the full screen API, but since most apps still don't, the (Snow) Leopard system worked better. Windows 8 is going to have a similar problem until most apps people use are Metro.

You're a fringe case. I have no comment on using 3 screens, but most people don't have more than 1, and most people have small screens as they have netbooks and laptops. For a single screen inside 15", Peek is far more useful than Expose.

I disagree with that because Expose uses whatever size screen you have and it allows you to specify either all the open application windows or only windows for the app that has focus. And it again fills the whole screen so no matter what size screen you got you're going to have the expose windows larger than the little thumbnail that Aero Peek offers at the bottom of the task bar and you don't need to waste time going through all the thumbnails waiting for the window you want to appear either.

And really if you're using a teeny-tiny screen and have hundreds of windows open maybe it's time for an upgrade to a big boy computer.

I've had a 12" iBook and a 15" Powerbook and I currently have a 17" MacBook Pro. All have run Expose brilliantly and I would rather have Expose on that 12" iBook than Aero Peek.

If you've got a small screen and lots of apps open, there isn't enough screen size (particularly with only WXGA resolution) to display any meaningful differences between several text documents. I do proof-reading and editing. Expose fails miserably for that. It works well enough for other purposes, but for multiple text heavy documents on a single, small screen it's pants. And once you go to a large screen, you can have multiple documents side by side, so there's no reason to swap between windows.

If you've got a small screen and lots of apps open, there isn't enough screen size (particularly with only WXGA resolution) to display any meaningful differences between several text documents. I do proof-reading and editing. Expose fails miserably for that. It works well enough for other purposes, but for multiple text heavy documents on a single, small screen it's pants. And once you go to a large screen, you can have multiple documents side by side, so there's no reason to swap between windows.

I don't do proof reading but how does Aero Peek help? Aren't you just reading the buttons on the task bar or the text at the bottom of the thumbnails when you enact Aero Peek? - Cause App-specific Expose lists the window names below the window so you could read which text document is which if they all look the same. I don't really understand how Aero Peek would solve this issue as all those thumbnails would look similar if all your windows are just walls of text. Have you considered using a reading app with tabs like how a web browser handles pages? That might help your workflow.

They're sitting on $100billion in cash. They should give something back to the users that made them so damn rich.

They lowered the value of their software to ridiculously cheap prices. OS X, Final Cut X, Motion, Compressor, Aperture, GarageBand, iPhoto, iMovie, iDVD, iWeb? and you?re not forced to buy them together either. In my book, this is the equivalent of giving us something back.

That leaves me wonder what they?re going to do with all their money though. Can?t keep it all forever. The new Spaceship won?t be enough to waste it all.

Whether it's pirated or not doesn't change the fact that, for an end-user, there's not much to write home about. I know I'll be buying it, but only because I can't install Snow leopard on my mac, and I want the old expose back.

Agree'ed. Dont need the INTERNET POLICE in here....sigh

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • NetSpeedTray 1.3.3 by Razvan Serea NetSpeedTray is a lightweight, open-source Windows network monitor that shows live upload and download speeds directly on the Taskbar. Designed for efficiency, it quietly sits in the system tray, conserving CPU and battery with dynamic updates. It blends seamlessly with Windows 10/11, adapts to light/dark themes, and auto-positions to avoid overlaps. Features include accurate interface detection, customizable display, optional mini-graph, color coding, granular font and unit control, detailed per-interface history graphs, safe data management, and easy CSV export—bringing the network monitoring Windows forgot. NetSpeedTray key features: Lightweight & Efficient Runs quietly in your system tray without consuming resources. Features a "Dynamic Update Rate" that lowers refresh frequency when the network is idle to save CPU and battery life. Native Look & Feel Blends seamlessly with Windows 10/11 UI. Smart detection for light and dark taskbar themes ensures text is always visible. Intelligent & Adaptive Positioning Automatically finds empty space next to your system tray and shifts to make room for new icons, preventing overlaps. Seamless OS Integration Behaves like a native Windows component. Hides instantly with auto-hiding taskbar Hides when a fullscreen app is active Smart Network Monitoring Accurate by Default: Auto mode identifies your main internet connection and ignores noise from VPNs or virtual adapters. Easy Interface Selection: Switch effortlessly between Auto, All, or Selected network interfaces via intuitive radio buttons. Total Visual Customization Free Move Mode: Unlock and place the widget anywhere on your screen. Optional Mini-Graph: Real-time graph of recent network activity with adjustable opacity. Color Coding: Customize colors and speed thresholds to quickly see network status. Granular Display Control Text & Font: Adjust font family, size, weight, and alignment. Units: Automatic (B/s, KB/s, MB/s) or fixed Mbps display. Precision: Set decimal places and always show them for uniform appearance. Detailed & Intelligent History Graph Smart Scale: Logarithmic scale shows low-level traffic and large spikes clearly. Per-Interface Filtering: View speed history for specific adapters (Wi-Fi, Ethernet, VPN). Safe & Efficient Data Management: Adjustable retention, automatic cleanup, optimized database. Easy Data Export: Export raw data to .csv or save high-quality graphs for reports. NetSpeedTray v1.3.3: The Updater Fix A stabilization release that repairs a critical regression in v1.3.2: the app shipped without OpenSSL, which silently broke every HTTPS request — including the built-in update checker (the "Could not check for updates" error many of you hit). This release restores it, hardens the build so it can't happen again, and fixes a startup crash plus four other reported bugs. Changes: Fixed update checking — Resolved a critical issue that prevented the app from checking for updates ("Could not check for updates"). Fixed startup crash with Auto-Cycling — The app no longer crashes on launch after enabling Cycle display mode. Fixed incorrect network speeds on 10GbE adapters — Multi-gigabit network cards now display speeds correctly instead of being stuck at 0. Improved color coding — Default color is shown when idle, and color/threshold changes now apply immediately without restarting. Fullscreen visibility fix — The widget now correctly stays visible over fullscreen apps when Keep Visible is enabled. Improved AMD Ryzen temperature detection — More reliable CPU temperature monitoring for Ryzen processors. Cleaner upgrades — Installer now removes outdated application files during upgrades, preventing DLL/version conflicts while preserving user settings. Improved stability — Fixed potential DLL loading issues by excluding critical OpenSSL and NumPy components from UPX compression. Better settings window — Scrollbars removed and layout improved for a cleaner experience. Localization improvements — Updated translations and completed missing UI text across all supported languages. More reliable releases — Added regression tests covering recent critical fixes, bringing the test suite to 196 passing tests. [full release notes] Download: NetSpeedTray 1.3.3 | 87.9 MB (Open Source) Download: NetSpeedTray Portable | 101.0 MB View: NetSpeedTray Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Why Delta Chat is the best decentralized messenger you have probably never tried by Paul Hill There is no shortage of messaging apps out there; we have WhatsApp, Messenger, and Telegram, just to name a few. While Meta has taken steps to incorporate encryption into Messenger and WhatsApp, they still leave a lot to be desired. If you are in the market for a messaging app that promotes security, privacy, and optional anonymity, you'll want to read what I have to say about Delta Chat. For those not familiar with Delta Chat, rather than relying on centralized servers as you do with Facebook Messenger, it relies on email. Essentially, it is a chat interface that feels like a messaging app, but secretly in the background, it is firing off emails. In the past, you used to have to sign in with your email account. When you sent messages to people, it would just be sending encrypted messages to their inbox, which their Delta Chat client would decrypt. When I first learned about Delta Chat, it required users to sign in with an email account, but I was pleasantly surprised upon trying it in 2026 that this is no longer a requirement, or the preferred method was to use the app. Recently, I’ve tried UAD-ng on my old Nokia 3.4 to disable most of the Google apps because the bootloader is locked, and this is the next best option. While finding replacement apps in F-Droid, I came across Delta Chat again, and it has undergone quite a big change since I last used it, with its new chatmail relays, which no longer require you to sign in to your own email account, providing anonymity, and they offer greater security. Android and Desktop Delta Chat apps. Not only does it run on my de-googled phone, but it also works on desktop computers and iOS, making it truly ubiquitous. For me, Delta Chat is a wonderful alternative messenger because it gives you more control. It supports switching between different profiles, which you can set up super quickly; you don’t register a username, you don’t register a password. The only thing you do have is a random string email address on a chatmail relay (which you don’t have to memorize). To maintain access to your profile, you just need to add a second device to your account via QR code or make a backup of your account, which you can restore later. Fail to do these, your account is gone - as it should be if you don’t want to leave accounts that could get hacked later on. My decision to block Google stuff on my Nokia was done for practical reasons; the device sucked when it launched, and it sucks even more now. The nice thing about F-Droid and the apps within is that they’re usually lightweight, free of bloat, and work well on that device. What was inconvenient for me was that it was hard to send messages from that device, say if I wanted to copy a code over to my main phone or send family members a link from that device. That’s when I decided to look at the available chat apps and saw Delta Chat. Another nice thing about Delta Chat is its notifications. Some messaging apps rely on Google’s ecosystem for notification transport on Android; however, with Delta Chat, it can use Google’s solutions if you have Play Services or MicroG installed. Otherwise, it is able to keep a background connection to the chatmail relay server so that you can get notified when you receive a message. As free software, the code of Delta Chat is open for all who want to take it and build upon it. In the future, if the developers of Delta Chat make a catastrophically bad decision and take the app in an undesirable direction, users can take the code and fork the project. This contrasts with closed-source apps from corporations that can take their products in any direction they like. By relying on free software instead of closed-source programs, you actually control your computing. I’ve spoken at length about how running this type of software is like owning your own home rather than renting it. The same applies here; if you use Delta Chat, you don’t need to worry about it going away in the future. Whether it is Telegram, WhatsApp, or Messenger, you are required to register a username and password to use these services. A major flaw in this design is that anyone can try various passwords and potentially break into your account with your complete chat history intact. Sure, there is encryption in Messenger, where you need a second PIN and two-factor authentication in Telegram, but breaches happen all the time. Unlike before, when you used to sign in to your email account to send and receive messages, the primary way to do it now is to create an account on a chatmail relay. The resulting email address is a random string followed by the name of the relay you pick. This means you can start and begin adding contacts Without a username and password, you either need to ensure you have a backup or at least one device running your Delta Chat profile. The primary way to log in on another device is to go to the settings and add a second device. Then, you’ll just scan a QR code with your new device, and it’ll log in to your account and sync all your chat history and contacts. To end users, Delta Chat just looks like any instant messenger; however, it is really sending your messages as encrypted emails to your contact. This is pretty cool from a censorship perspective, as it makes the service more difficult to block. Previously, the main way to use the app was by logging in with email, but nowadays, it’s recommended that you use chatmail relays. Chatmail relays temporarily hold messages in case your device is offline. They are cheap, simple servers that don’t store data as group states. Other information, like your name and avatar, only exists on your device and the devices of those you share your contact information with. The relays are also decentralized and operated by various groups and individuals. It is even possible to set up your own chatmail relay, but most people will want to use one hosted elsewhere. To keep your messages secure, Delta Chat uses a secure subset of the OpenPGP standard that gives you automatic end-to-end encryption. It also uses Secure-Join to exchange encryption setup information through QR-code scanning or invite links. Autocrypt is also used to automatically establish end-to-end encryption between contacts and all members of group chat, but sometime this year Autocrypt v2 will be rolled out, bringing post-quantum resistant encryption and forward secrecy. The Delta Chat FAQ is an interesting read that explains many more details about the app. Credit: Pexels Delta Chat is unique among messaging apps because it is built on email, a technology that’s decades old and isn’t going anywhere soon. What’s more is that email is not centralized either, so it’s far more difficult for any authoritarian regime to disrupt the Delta Chat app. I haven’t spoken too much about features yet, so I will do that now. Delta Chat allows you to do one-on-one chats, group chats, and create channels. It also supports file sharing and making audio and video calls when chatting one-to-one, but it’s not available for group chats right now. At the time of writing, the calling functionality is disabled and can be enabled in Settings > Advanced > Debug Calls. I have used the video calling feature, and the quality is excellent. It works over WebRTC, another open standard. The app also lets you send voice notes, enables disappearing messages, and has its own app ecosystem. I did try playing chess one time there, but it was a bit spotty; though, we did manage to complete the game with a victory for me. To add people to Delta Chat, you can either give them your Delta Chat link or your QR code to scan. These are the only ways to add users, so you won't have any spam bots bothering you. If the people you want to chat with don't have the app yet, just send them your link, and it will take them to a webpage where they can install the app and then add you. It's really quick for them to install it and get started, which is nice. Credit: Microsoft. The Majorana 2 quantum chip unveiled in 2026. I do not think quantum computers are too far out now, and I do hope that Delta Chat is able to push out Autocrypt v2 sooner, rather than later, so bad actors do not attempt to collect encrypted communications and then decrypt them in the future using quantum computers. By getting people’s messages post-quantum-safe now, users won’t have to worry when quantum computers start cracking legacy encryption. Overall, I would recommend this app to people who are already past WhatsApp and Messenger and have perhaps begun using apps like Telegram or Session. It shares a lot of characteristics with these apps and goes a lot further than Telegram in terms of security. By being based on email, it is also resistant to censorship, and the lack of a username and password makes you anonymous (if you want to be) and safe from brute force password cracking attempts. Let me know in the comments if you’ve tried Delta Chat recently. Do you think it's a good bulwark against governments that are tightening their grip on the internet?
    • Putin was behind Farage/Brexit and behind Trump/MAGA. Different idiot lying beasts, same fascist master. Same screwed up results for both nations.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      217
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!