Texas to execute inmate diagnosed as 'mentally retarded'


Recommended Posts

The death penalty is wrong and those who agree with it are simply falling into the 'eye for an eye' mentality and imo that's dumb.

If you ignore the fact that putting them in prison is cheaper than executing them, imo if someone commits a crime they should pay for it. Executing is a let off.. by doing that they don't have to pay for their crimes. Would I rather them be treated like scum for the rest of their life or let them take the easy way out? I'd rather the former.

The death penalty is wrong and those who agree with it are simply falling into the 'eye for an eye' mentality and imo that's dumb.

And yet aren't you for abortion?

I find it totally hypocritical that the left is against the death penalty and yet for abortion. I also find it hypocritical that the right is against abortion and yet for the death penalty.

  • Like 1

ok just because you are retarded doesn't mean you have the right to kill someone else - so Texas got it right IMO!

Straw man argument!

strawman1.jpg

Nobody was claiming that anyone has the right to kill someone else, whether the perpetrator is retarded or not. This discussion is about whether it is legally proper to execute a mentally retarded prisoner, especially after the US Supreme Court has ruled it illegal to do so.

Thread cleaned

Please remember to be polite at all times, and please do not personally attack others, even if you feel provoked.

Thank you

The death penalty is wrong and those who agree with it are simply falling into the 'eye for an eye' mentality and imo that's dumb.

[. . .]

Not everyone who supports the death penalty is following "an eye for an eye." Some people feel that society will be safer if a known murderer is unable to murder again. Dogs are put down if they maul people to death because they are a danger to society and they do not understand right from wrong. Likewise, many murderers (and other criminals) will never understand that what they've done is wrong, and many of them will always be a danger to society.

I'm not sure how I feel regarding the death penalty, as I don't like the idea of anyone deciding that another living organism must be killed; however, I believe that the safety of society should always be paramount.

The death penalty isn't about justice it's about revenge. Hopefully America will join the civilised world soon and stop killing in the name of revenge.

  • Like 2

The death penalty isn't about justice it's about revenge. Hopefully America will join the civilised world soon and stop killing in the name of revenge.

If you read my reply to Tom, I point out why the death penalty isn't always about revenge. In my view, it can be about ensuring society is a safer place. As I say, I'm not sure whether I'd support the death penalty or not, in cases where the criminal has been proven to have committed the crime, but putting down a murderer is the only way to make sure they cannot murder again. As I mention in that post, we put down dogs that have mauled others because of the danger they pose and their inability to understand that harming people is wrong.

Not everyone who supports the death penalty is following "an eye for an eye." Some people feel that society will be safer if a known murderer is unable to murder again.

And there are 3 more to take that murderer's place. ;)

Thread cleaned

Please remember to be polite at all times, and please do not personally attack others, even if you feel provoked.

Thank you

Not everyone who supports the death penalty is following "an eye for an eye." Some people feel that society will be safer if a known murderer is unable to murder again. Dogs are put down if they maul people to death because they are a danger to society and they do not understand right from wrong. Likewise, many murderers (and other criminals) will never understand that what they've done is wrong, and many of them will always be a danger to society.

I'm not sure how I feel regarding the death penalty, as I don't like the idea of anyone deciding that another living organism must be killed; however, I believe that the safety of society should always be paramount.

I figure if you leave them incarcerated for the rest of their lives, then the only people they can kill are other inmates.

Although, I don't think people should be incarcerated for petty crimes/drug use/selling.

I figure if you leave them incarcerated for the rest of their lives, then the only people they can kill are other inmates.

Although, I don't think people should be incarcerated for petty crimes/drug use/selling.

That's a possibility, but it's also possible they could escape (even though that might be rare). My concern is that if they're incarcerated for the rest of their life, there is always a chance someone could come and overturn that, and I don't think proven murderers should ever be allowed out of prison. I would rather them be incarcerated for the rest of their life, though, instead of them having to be put down, if we can be sure there is no way they will kill any further innocent people.

And there are 3 more to take that murderer's place. ;)

That will unfortunately probably always be the case. But society is safer with 3 people who are capable of murder than it is with 4.

That's a possibility, but it's also possible they could escape (even though that might be rare). My concern is that if they're incarcerated for the rest of their life, there is always a chance someone could come and overturn that, and I don't think proven murderers should ever be allowed out of prison. I would rather them be incarcerated for the rest of their life, though, instead of them having to be put down, if we can be sure there is no way they will kill any further innocent people.

I don't know... To play devil's advocate, many people maintain that jail is meant to be for rehabilitating and used with the hope that people will be changed once they come out. I do not see much evidence that it works for serious crimes, but that's the point plenty of people like to make. So if there is no reasonable chance of reform, why let them sit around for years and years wasting away on the taxpayer dime?

I don't know... To play devil's advocate, many people maintain that jail is meant to be for rehabilitating and used with the hope that people will be changed once they come out. I do not see much evidence that it works for serious crimes, but that's the point plenty of people like to make. So if there is no reasonable chance of reform, why let them sit around for years and years wasting away on the taxpayer dime?

Unfortunately, I cannot deem rehabilitation appropriate because it doesn't always work. Rehabilitated criminals are released with the hope they will not recommit, rather than the certainty they won't recommit, and I believe that is dangerous for society. I would rather the government spend more of our money on keeping known murderers in prison because we know then that they won't be able to murder more innocent civilians.

Most of the cost comes from the trail. If someone like james holmes gets arrested for murdering people you really think he's innocent? No need to drag on the process. Whos going to argue that hes innocent anyway? Swift justice. innocent until proven guilty? I believe the people he killed pretty much proves hes guilty.

So he has a chance to be proven innocent? The trial will drag on and on when everyone knows he's guilty even the court of law. I'm not saying this should be the case for ALL cases but when someone shoots up a bunch of people and has numerous witnesses and gives him self up to the police. He's guilty right there and everyone knows it. If it was up to me I would of hanged him on the spot. Call me barbaric all you want but it would save a hell of a lot of money to just get rid of them right then and there. Again I wouldn't consider it for all cases only the most extreme cases. Death penalty swift and fast for anyone that commits mass murder. Kind of drifting off the topic a little but.

Wow.

Thats all I can say.

Surely EVERYONE deserves a fair trial?

You say you know he is guilty, but how do you know? How do you know that the evidence has not been fabricated or is just plain wrong? The fact those people are dead does not mean this person did it!

I am not saying he is innocent, but there is always the chance he is. Without a fair trial how can you know?

If you start disallowing people the right of a fair trial, then you start a very dangerous game.

Not everyone who supports the death penalty is following "an eye for an eye." Some people feel that society will be safer if a known murderer is unable to murder again.

But surely that goal is completed if they are put in prison for life?

A retard is deemed not to have the mental capacity to understand the consequences of their actions.

I thought the word "retard" was deemed not very politically correct? Is "retard" back in style now or is it still offensive?

Well according to this 90,000$ a year to house someone on death row in California. As for the the axact amount just for an execution, I couldn't find out. But in my opinion, it would be significantly less, just for the procedure. You can't tell me that the chemicals to put someone down costs 25mil.

Don't count california. They have no idea what a budget is. Can give that state back to Mexico for all I care... The rest of American will probably have to bail them out soon....

People shouldn't be put in prison for selling drugs?

Making them pay fines wouldn't work unless those fines were pretty hefty.

Well ok, maybe it would depend on which drugs.. do I think people who exclusively sell marijuana should be sent to prison? No. Should they get caught, maybe they should be forced to pay taxes on the money they've earned through the sale of marijuana.. somehow.. or possibly for future sales? Although probably not a viable option really.

I thought the word "retard" was deemed not very politically correct? Is "retard" back in style now or is it still offensive?

I hate politically correctness!!!! ugh. It's just words! Sticks and stones people! We aren't 5 years old!

(Good question though, I'm interested in what a liberal has to say)

Have you ever even been to England and ate food here? - I've been to America and tasted your food and honestly I noticed no different. Guess what, chicken, beef and fries tastes the same regardless of what country you're in. Shocking I know.

Go to the middle east...Pizza does NOT taste like pizza

I find it totally hypocritical that the left is against the death penalty and yet for abortion.

So for you a fetus is the same as a full grown human being? For me and others there's a HUGE difference and It's not hypocritical at all to support one but not the other.

I thought the word "retard" was deemed not very politically correct? Is "retard" back in style now or is it still offensive?

I guess it's okay as long as only people outside of this forum are called retards. No harm done, right? Which is all kinds of ironic after reading through this thread.

I thought the word "retard" was deemed not very politically correct? Is "retard" back in style now or is it still offensive?

I meant to say 'retarded person' but I don't see that it matters, as clearly no offence was intended.

So for you a fetus is the same as a full grown human being? For me and others there's a HUGE difference and It's not hypocritical at all to support one but not the other.

People have abortions because they know the kid is going to come out retarded. Not a HUGE difference like you say, so it is hypocritical. Who can define when life starts? And btw, a baby is a full grown human so are you alright with killing them?

The US Supreme Court gave a nebulous decision back then. They ruled out executing the mentally retarded, but did not define it. That they turned back to the state legislatures to decide.

What little guidance they did give may not help this guy;

so if he could care for himself, communicate, etc. he could well not meet the legal definition outlined by SCOTUS.

What it boils down to is can he function on his own. Even people with Down Syndrome can be high functioning and live normal lives, and can also be held responsible for their decisions.

He may have been diagnosed with an Axis 2 personality disorder, but many people with personality disorders are high functioning (Anti-Social PD, Borderline PD, etc.). These would not prevent you from being held responsible if you committed and were convicted of a crime.

This topic is now closed to further replies.
  • Posts

    • WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
    • When I think about a network, there are really two aspects, the hardware and the wiring. So here is what I would do for both. Wiring: Use Cat6A for the patch panel, outlets, and all structured cables (cables installed in walls). Run plenty of Wireless Access Point (WAP) cables, as a general rule, assume a signal can only pass through 2-3 walls and can't pass through a floor (that is conservative, but trust me on this if you want strong WiFi)  Cat6 patch cables are fine for now if you don't plan to run 10gig, those are easy to replace later if needed. Run OS2 single-mode fiber to anywhere you think you may have a server or sub-switch. (yes, single-mode for everything on a small network, don't mess with multimode unless you have entire racks of servers and that minor module cost and power savings will matter). If you really want to future proof, also run fiber to any high density WAP locations, it is likely that WiFi 8 WAPs will push the limits of 10g. Run 6-12 pairs of single-mode fiber between your MDF and the building's MDF, even if you only need 1 or 2 pairs now, those extra pairs will pay off down the road. Hardware: (its easy to say "get all the features incase you need them", so instead of futureproofing, I am going to take approach of suggesting areas worth investing in, and areas you can save money). Don't overspend thinking you need every feature on every port. You don't need 10g on every port, you don't need PoE on every port. Don't overspend on redundancy either, unless you are ready to buy two of everything, don't waste money buying two of some things and not others. Dual power supplies are worthwhile, but probably not HA or multi-path redundancy.  Get 1 "distribution layer" switch that your router/firewall will connect to as well as all your access layer switches below. This should be a fully managed 10g+ switch with a combination of copper and SPF ports, a few 25g uplink ports are nice for this switch. Given that you said it is a small network, I suggest also using that distribution layer switch for servers and WAPs, meaning it will need PoE. Speaking of wireless, get good professional tri-band WAPs, and either turn on the band stirring options, or limit 2.4 to an IoT only SSID. This will provide a solid WiFi capable nearly everything but the highest of bandwidth clients...you could even consider skipping wiring workstations depending on usage. Access layer switch for workstations and printers can be cheaper switches, 2.5g is a good sweet spot between price and future proofing, but even 1g is fine for most individual clients (the kind that could probably be fine on WiFi). You can consider saving a little on access layer switches by only getting 1 PoE switch for whatever needs it (remember your WAPs are connecting to the distribution switch, not here), and non-PoE for your workstations, because desk phones are falling out of favor. You can also save money here by not buying managed switches if you don't need them--but really do some soul searching there, if you go this route, then anything that isn't on your workstation VLAN would either need to be connected to the distribution switch, or its own access layer switch. Also, don't feel like you need a fancy fabric stacking switches for your access layer, that is the point of the higher-end distribution layer, to remove the need for things like that at this level. Home Hardware: I'm realizing the above assumed an office setting, if this if for your house and home lab then the above still applies, but you'll probably want everything managed and PoE, just because, but you probably also don't need multiple access layer switches. If your total port count is below 24, just skip separating distribution layer and access layer and just get one nice switch with the features you want. If you are at the point of considering a 48-port switch, I would instead get a nice high-end distribution switch for things that need it, and cheaper access layer switches with specs based on the needs of connected devices. For home use, don't worry about home running every device to the main switch, there is nothing wrong with running sub-switches for your media areas and office, those essentially become your access layer, just look for sub-switches with a 10g uplink so sharing bandwidth isn't an issue. Just make sure you always connect them to your distribution/main switch, don't daisy chain, the path should never have more steps than Client>Access>Distribution>Firewall>Internet.
    • Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers by Karthik Mudaliar Google's Gemini-powered "Take notes for me" feature inside Google Meet is now available to Google AI Pro and Ultra subscribers. The features work on Google Meet for web as well as on mobile, and Google says that subscribers can use it for meetings they host in many supported languages. As the name suggests, "Take notes for me" allows Gemini to listen to a meeting, generate a summary, identify action items, and save the notes as a Google Doc in the user’s Drive. After the meeting, the organizer receives an email recap with the summary and action items, while the notes can also be attached to the related Calendar event depending on the meeting setup and sharing settings. The feature isn't automatically turned on for everyone, though. Google says that all meeting participants are notified when note-taking is turned on, and users can start it from the pencil icon in Meet or enable it for future calls through Meet’s meeting records settings. For work or school accounts, administrators can also control whether the feature is available and may require explicit participant consent for note-taking, recording, or transcription features. The feature first launched back in 2024, when it was available just for selected Workspace users. Over the years, Google added refinements and more options, including the ability to enable it when scheduling meetings via Google Calendar. Google's support docs say that the feature currently supports English, French, German, Italian, Japanese, Korean, Portuguese, and Spanish, but only one language at a time. Meetings with multiple spoken languages are not currently supported, and Google recommends using the tool for meetings between 15 minutes and eight hours. The new feature makes Google Meet closer to its rivals that have AI tools already built in. Microsoft Teams has recently started offering Copilot and intelligent recap features that summarize meetings, surface highlights, and help with follow-ups, while Zoom’s AI Companion can also generate meeting summaries from desktop and mobile meetings.
    • GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally launches WSL Containers in public preview by David Uzondu Microsoft has announced that WSL containers, a feature that allows developers to run Linux containers natively inside Windows without the need for Docker Desktop, is now available in public preview several weeks after Microsoft previewed it at Build 2026. To use the new container feature, you first have to install the latest pre-release version of the Windows Subsystem for Linux by running a quick update command in your terminal: wsl --update --pre-release After installing, you'd get access to the new Linux container CLI (wslc.exe) and the programmable API. Microsoft said that the CLI has a "familiar format" that matches the toolsets developers already use every day. If you know standard Docker commands, your muscle memory will translate directly to wslc.exe, which even features a built-in alias called container.exe. You can quickly run a full Ubuntu KDE desktop container by exposing ports, or pass your graphics card straight into a machine learning environment to run PyTorch workloads. Passing the --gpus all flag inside the run command instantly links your hardware. Image via Microsoft As for the API, developers can now embed Linux container operations directly inside native Windows applications without exposing the command line to users. The team integrated the API directly into MSBuild and CMake, so developers can define container steps directly in project files. Apart from bringing the CLI and API into public preview, Microsoft also said that it's working on a new default file system called virtiofs to speed up file transfer rates between Windows and Linux. Microsoft also introduced an experimental networking mode named consomme, which resolves compatibility issues with corporate VPNs by routing Linux network traffic straight through Windows. One thing to note about WSL containers is that they don't run in your standard WSL distributions; instead, every application and CLI session spawns its own lightweight Hyper-V utility VM in the background. This basically reduces the chances of one app snooping on the container of another app.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!