Help! Explorer suffering from weird problems at startup

By starbearer
in Microsoft (Windows)

 Share

Recommended Posts

Collaborator

starbearer

Posted
Posted

When I start my system, Explorer does not start.

When I open the task manager by ctrl+shift+esc, explorer.exe is listed as a running process occupying 11K of memory.

If I kill it, and try to start Explorer again from "Start New Task", nothing happens, except explorer is listed again in the running processes occupying the same 11K of memory.

Even if I start more instances, all these are listed as running, roughly taking up 1K memory.

In Start New Task, if I try to start something like "C:\ABCDEF", to try and get an explorer window or something manually, it just tells me that explorer has failed and will need to close.

I've tried checking for solutions, and somewhere, there was a talk of checking the registry value under Winlogon (under HKEY_CurrentMachine-software-microsoft-windowsNT-CurrentVersion) and check the value of Shell. It is listed as Explorer.exe only, so not problem there..

Nothing happens if I leave it like this. If, instead, I try and do some other stuff, like kill off svchost.exe, which is responsible for aero effects etc.,(works only sporadically), then explorer comes to life.

I run Windows 7 ultimate.. The system has BitDefender IS 2012, and I regularly scan for viruses etc. It's not a problem.

Please suggest a solution to this, It's extremely irritating to not have the explorer and keep on trying various things to get it running.

Collaborator

firewire1290

Posted
Posted

When I start my system, Explorer does not start.

When I open the task manager by ctrl+shift+esc, explorer.exe is listed as a running process occupying 11K of memory.

If I kill it, and try to start Explorer again from "Start New Task", nothing happens, except explorer is listed again in the running processes occupying the same 11K of memory.

Even if I start more instances, all these are listed as running, roughly taking up 1K memory.

In Start New Task, if I try to start something like "C:\ABCDEF", to try and get an explorer window or something manually, it just tells me that explorer has failed and will need to close.

I've tried checking for solutions, and somewhere, there was a talk of checking the registry value under Winlogon (under HKEY_CurrentMachine-software-microsoft-windowsNT-CurrentVersion) and check the value of Shell. It is listed as Explorer.exe only, so not problem there..

Nothing happens if I leave it like this. If, instead, I try and do some other stuff, like kill off svchost.exe, which is responsible for aero effects etc.,(works only sporadically), then explorer comes to life.

I run Windows 7 ultimate.. The system has BitDefender IS 2012, and I regularly scan for viruses etc. It's not a problem.

Please suggest a solution to this, It's extremely irritating to not have the explorer and keep on trying various things to get it running.

Best option is windows repair .If that doesnt work do fresh install (Its best option(my opinion)).

explorer problems are troublesome.

Collaborator

starbearer

Posted
  • Author
Posted

Best option is windows repair .If that doesnt work do fresh install (Its best option(my opinion)).

explorer problems are troublesome.

I don't wish to do a fresh install. And I don't have the repair DVD at hand. Is there any other way to do this...in a less...invasive, procedure?

Enthusiast

phailyoor

Posted
Posted

Windows explorer. I have done the check.

Log file has been generated. What am I looking for, specifically, in this?

Sfc should fix all integrity violations automatically when using scannow. If it detects errors, but cannot fix them, then there is a serious issue with your windows installation. I cannot think of any way to fix something like this without a windows install disk. If you get an install disk, you should be able to do a repair install, which should replace the system files but leave your personal data.

Collaborator

starbearer

Posted
  • Author
Posted

Have you tried Windows key + E? What happens if you do that?

Nothing happens with any of the Windows Key combinations.

Sfc should fix all integrity violations automatically when using scannow. If it detects errors, but cannot fix them, then there is a serious issue with your windows installation. I cannot think of any way to fix something like this without a windows install disk. If you get an install disk, you should be able to do a repair install, which should replace the system files but leave your personal data.

I'm not in a position to get a recovery from anywhere. SFC/Scannow did detail some errors which it wasn't able to fix.

I'd keep it in hibernate, except that its battery is shot, and if there's a power cut, it'll go off anyway.

Enthusiast

phailyoor

Posted
Posted

Nothing happens with any of the Windows Key combinations.

I'm not in a position to get a recovery from anywhere. SFC/Scannow did detail some errors which it wasn't able to fix.

I'd keep it in hibernate, except that its battery is shot, and if there's a power cut, it'll go off anyway.

You can legally download the disk images for windows 7. Should be easy to find using google. With the image, you can burn a DVD or make a bootable USB. Since sfc cannot correct the issues you're experiencing, that means that your windows installation has been corrupted to the point that it cannot repair itself. There is no way to solve that issue without an install image.

Grand Master

Detection

Posted
Posted

System restore ?

When did it start happening

The sfc /scannow should have told you if there were corrupt / missing files and if it repaired them, and to reboot if it was able to replace them or not

I believe it logs the scan here

C:\Windows\Logs\CBS

I still give something like "malwarebytes" and "hijack this" a scan to be sure

Collaborator

starbearer

Posted
  • Author
Posted

download windows 8 (you mitght not like it if you dont like metro look) .its free i guess ...

Need to avoid a fresh install.

Well, if there's really no other option,as the scannow is indeed throwing corrupt files at me, I guess I'll have to start looking for a repair disk.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Microsoft explains why PowerToys 0.100.0 is faster and slimmer, there are new features too

      By Fleet Command · Posted

      The post-installation disk footprint hasn't changed much. In version 0.99.1, it was 979 MB. Now, it is 959 MB. That's just 2%. Also, PowerToys fills the disk with logs like crazy. Just look inside "\AppData\Local\Microsoft\PowerToys".
    • EU Commission explains why Siri AI isn't launching in the EU, and Apple is to blame

      By Fleet Command · Posted

      Yeah, right! /s They've been saying that for two centuries now. Look up "China's final warning" on Wikipedia.
    • SQL Server Management Studio 22.7 brings "What's New" page, T-SQL formatting, and lots more

      By Fleet Command · Posted

      It already has. Look up Codename Monaco.
    • Claude on Windows is eating up massive amounts of RAM, with no way to stop it

      By +TRS-80 · Posted

      I have not verified if any of the fixes mentioned on the below article actually work. Why Claude Code Eats All Your RAM (And How to Fix It) There are at least four separate things that can eat your RAM, and only one of them is your fault. The Four Culprits 1. Bloated Session Logs (The Silent Killer). For 2-4 and more inluding the suggested fixes, see link https://marceloretana.com/blog...aude-code-eats-all-your-ram
    • Claude on Windows is eating up massive amounts of RAM, with no way to stop it

      By Nas · Posted

      One of my PC's is Windows 11 Home Edition... and guess what? it supports Hyper-V Disks and Containers, as well as WSL2... which these desktop tools leverage on an as-needed basis. It does not need to be enabled system-wide; it merely needs to exist. Furthermore, I tried something yesterday with Hermes Desktop and their "installer" actually builds everything from source as part of its installer toolchain! The installer (and updater as it were) both go through a roughly 19-step process to prep the system for the tool to be used -- and connectivity to local/remote models, local/remote agent configs, and other steps are not included as part of this process (those are all user config steps post-install). ALSO, the "bug wasn't confirmed to exist" is the weakest argument against a bug. That's literally every flawed product's knee-jerk reaction! Even politicians, lawmakers, murderers, and other violent criminals start with that defense... "I deny everything I'm accused of." The bug is the (shared) experience. Whether it's truly Claude Code's fault, or user error, or some other software package being the ultimate culprit, is not the point. They are experiencing unpleasant side effects and don't like that.

  • Recent Achievements

    • One Month Later
      Sopa flores earned a badge
      One Month Later
    • First Post
      StaticMatrix earned a badge
      First Post
    • Week One Done
      StaticMatrix earned a badge
      Week One Done
    • Rookie
      lamborghiniv10 went up a rank
      Rookie
    • One Month Later
      pinnclepd earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      PsYcHoKiLLa
      208
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      96
    5. 5
      ATLien_0
      81
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!