Wired Xbox 360 controller won't work with my Tab 2 10.1

By Elliot B.
in Android Support

 Share

Recommended Posts

Grand Master

Elliot B.

Posted
Posted

I am trying to connect a wired Xbox 360 controller to my Samsung Galaxy Tab 2 10.1 tablet (running Samsung's stock Android 4.1.1 ROM) via. an OTG adapter.

When I connect it, the following two messages appear:

"High-power USB device connected."

"Can not access to this device. "Connected device needs power supply."

Due to this, USB/BT Joystick Centre can't detect the controller.

Due to the poor English in the second message, I am presuming it's a Samsung ROM issue, rather than an Android/a tablet hardware issue.

Any ideas?

Grand Master

Elliot B.

Posted
  • Author
Posted

Seems like the error message gives the problem quite clearly to me...

Hardly. Loads of other Android phone/tablets users have no issues with the controller and their OTG adapter.

And are you saying you think the controller needs to be plugged into the mains? ;) Think.

Experienced

bmdixon

Posted
Posted

Not sure if it's the same for your tablet but it don't think my Galaxy Tab 10.1 (the first one) supported the XBox controller until i installed a custom rom that included the necessary kernel modules.

Having said that... both my Nexus 7 and Galaxy Nexus support it without doing anything special. I also haven't needed to use "USB/BT Joystick Center" at all, it just works when detected by Android.

Grand Master

Elliot B.

Posted
  • Author
Posted

Not sure if it's the same for your tablet but it don't think my Galaxy Tab 10.1 (the first one) supported the XBox controller until i installed a custom rom that included the necessary kernel modules.

Having said that... both my Nexus 7 and Galaxy Nexus support it without doing anything special. I also haven't needed to use "USB/BT Joystick Center" at all, it just works when detected by Android.

Yeah, I had a feeling it was related to the stock Samsung ROM :/

Grand Master

HawkMan

Posted
Posted

your USB port by default does not support high power output. so it cannot support a high power USB device, aka in this case the xbox controller. just like it wouldn't support most printers who require high power, many external HDD's. and so on.

a custom ROM "MIGHT" be able to change this by sending over spec power to the USB port, at the risk of burning it out.

Grand Master

Elliot B.

Posted
  • Author
Posted

your USB port by default does not support high power output. so it cannot support a high power USB device, aka in this case the xbox controller. just like it wouldn't support most printers who require high power, many external HDD's. and so on.

a custom ROM "MIGHT" be able to change this by sending over spec power to the USB port, at the risk of burning it out.

I'm surprised the controller is classed as a "high power" device. Sure, the vibration function is what it could be regarding, but I wouldn't if that's disabled.

I'm also annoyed that this tablet apparently can't do it, but many Samsung Galaxy phones support the Xbox 360 controller. Confusing!

Grand Master

_neutrino Veteran

Posted
  • Veteran
Posted

Apparently it is a common issue with people attempting to do this however, the USB port is not providing enough power to support using the Xbox 360 controller, I would suggest using Bluetooth and a PS3 controller. (that is what I use on my Tablet and phone.)

)

Grand Master

Elliot B.

Posted
  • Author
Posted

Apparently it is a common issue with people attempting to do this however, the USB port is not providing enough power to support using the Xbox 360 controller, I would suggest using Bluetooth and a PS3 controller. (that is what I use on my Tablet and phone.)

)

I can't really afford a PlayStation 3 controller.

Thank you for your help, guys :)

Grand Master

Eric Veteran

Posted
  • Veteran
Posted

Hardly. Loads of other Android phone/tablets users have no issues with the controller and their OTG adapter.

And are you saying you think the controller needs to be plugged into the mains? ;) Think.

It should work if you use a powered USB hub. 360 controllers (even the wireless dongle for Windows) use a ridiculous amount of USB power.

Grand Master

HawkMan

Posted
Posted

It should work if you use a powered USB hub. 360 controllers (even the wireless dongle for Windows) use a ridiculous amount of USB power.

The wireless dongle use it so it can charge up the blow the fuse capacitor :p

Grand Master

HawkMan

Posted
Posted

part of it is probably the really tiny antenna inside combined with the relatively good range. and as I said, they have to get the power to constantly blow that fuse after a couple of months from somewhere.

Grand Master

Elliot B.

Posted
  • Author
Posted

Got it half working thanks to this guy.

All we need to do is plug the controller into the OTG cable before you plug it into the tablet. Simple as that!

Now USB/BT Joystick Center detects the hardware, and all keypresses. However, no other apps seem to detect any keypresses (e.g. Mupen64Plus, XBMC 12.0 BETA 2 etc.)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release

      By Usama Jawad96 · Posted

      Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release by Usama Jawad Windows 11 typically follows an annual update cycle, but Microsoft recently broke that tradition a bit by releasing a "26H1" version in the first half of this year as a "scoped" build for select new silicon PCs only. This version was not available for customers using 24H2 and 25H2 builds, as Microsoft is busy preparing version 26H2 for them, confirmed officially for the first time. In a Windows IT Pro blog, Microsoft has urged IT admins to prepare for the upcoming release of Windows 11 version 26H2. The company has confirmed that this will be a small enablement package (eKB) that will simply light up certain disabled features that are already present in the operating system's code base. This means that the "refined" Windows update and deployment experience will be simpler and quicker, with minimal disruptions, as the feature update will simply toggle a few flags rather than performing a complete replacement. Microsoft has explained that this is all possible because the standard Windows 11 releases share the same servicing branch and hence, the same source code. However, this also means that Windows 11 26H1 users won't be able to upgrade to 26H2 as that is a different branch, but this is something we have known for a while now. Similar to previous annual feature updates, Windows 11 26H2 will offer the following support cycles: 24 months of support for Home, Pro, Pro EDU, and Pro for Workstations editions 36 months of support for Enterprise, Education, IoT Enterprise, and Enterprise Multi-session editions Microsoft has not confirmed a concrete release date for Windows 11 26H2, but noted that it is "coming soon". If we go by the ongoing release cadence, we can expect it to begin rolling out in early October 2026. As such, IT admins have been encouraged to begin validating Windows Insider releases in the Experimental Channel, plan rollout rings, and strategize the utilization of their existing deployment tools.
    • Windows 11 gets new audio improvements in the latest builds

      By TarasBuria · Posted

      Windows 11 gets new audio improvements in the latest builds by Taras Buria Today's Experimental builds (26H1 and Future Platforms, formerly Canary) pack several audio-related improvements. If your device is enrolled in the Experimental Channel (26H1), you can download build 28120.2315, while those in the Future Platforms version have build 29613.1000 to try. Here is what is new in build 29613.1000: [Audio] Following up on our previous improvements, we’re making some more adjustments to Settings > System > Sounds based on your feedback. Namely, we’ve updated the “All sound devices” page so: You now have the ability to change default devices from this page. Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. We’ve adjusted the page design slightly so now you can filter whether you’re viewing input or output devices. We’ve added toggles so you can choose if you want to hide or show disabled, disconnected, and unplugged devices on this page. We’ve also updated the input and output audio properties page for devices in Settings to now include jack information for those that need it. And here is the changelog for build 28120.2315: This update includes a small number of minor bug fixes and improvements. [Accessibility] This update improves caption style responsiveness by redrawing captions immediately for caption style changes. If no current caption is visible, a sample caption string is displayed. [Audio] This update improves the reliability of the inbox HD Audio driver. You can find the official release notes for build 28120.2315 here and for build 29613.1000 here.
    • Google is opening the world's first AI museum in Los Angeles

      By sphbecker · Posted

      I agree with what I think you are saying, just not in the way you are saying it. Like any tool, the amount it represents your work is perorational to the effort you put into it. It is similar to why 2nd grade math students learning to add and subtract are not allowed to use calculators, but a high-school calculous student is. For the 2nd grader, that tool would completely replace the work they are doing, for the calculous student the same tool allows them to work far more effectively while in no way replacing their effort or knowable. If you spend 30 seconds writing a prompt, then the image that comes out is no more "yours" than if you found the same image with a Google Image search. However, many of these generative tools also support highly iterative processes that allow back and forth, and merging generated images with photos or human created images. I am sure you would agree that a human spending hours of time working on a project, even if AI was involved in the process, still reflects that human's work.
    • Windows 11 version 26H2 is now available for testing in the latest preview build

      By TarasBuria · Posted

      Windows 11 version 26H2 is now available for testing in the latest preview build by Taras Buria Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. There are no new features, but Microsoft is officially moving the Experimental Channel to version 26H2. In addition, Microsoft is improving the copy dialog in File Explorer, the Start menu reliability, and fixing virtualization issues. Here is the changelog: [General] With today’s build, Windows Insiders in the Experimental channel will see the versioning updated under Settings > System > About (and winver) to version 26H2. For more information, see the Windows Insiders blog. [File Explorer] We’ve improved the visual consistency and reliability of the Copy dialog in Dark mode, including its launch experience and the expanded progress view. [Start menu] - Also available in Beta Improved reliability of Start menu reflecting newly installed or removed apps without requiring sign-out or restart. [Taskbar] Fixed an issue for Insiders using the new smaller taskbar option, where the system tray might get cut off or pushed off screen. [Settings] - Also available in Beta Improved reliability of Settings > Apps > Startup. [Virtualization] - Also available in Beta This update addresses an issue that could result in bugchecks citing HYPERVISOR_ERROR (0x20001) and KMODE_EXCEPTION_NOT_HANDLED (0x1E) errors after installing the latest flights on some devices during system restarts, virtual machine operations, or while running some gaming applications. You can find the official changelog for the Experimental build here and for the Beta build here.
    • We now know when and how the Universe may truly end

      By sphbecker · Posted

      I've always preferred this possibility. There is something that feels good about the idea that all matter in the universe will eventually come back together and maybe even result in another big bang. The idea that the universe would fizzle out over the eons and forever drift apart is a little depressing. I realize it is not logical to let a basic human desire for life to have a grand everlasting meaning change the way I feel about a scientific theory, but I am human, so that is how I feel :-).

  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      574
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      76
    5. 5
      neufuse
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!