5 hurt in accidental shootings at 3 U.S. gun shows


Recommended Posts

And you can prove that, how? And it is relevant, how? The world is not about the grades, it is about how you use the skills. I think you did not did your supposed 95% in English credit when you misinterpreted what was supposed to be light humour with no intention of personal attack or agenda except to poke fun at the home depot statement. I guess I could give you the benefit of the doubt, as we all know if you study literature enough there is always something hidden between the lines, but you seem to taken the "oh wait" quip far too personally.

I suppose if you take the entire conversation out of context, what you say makes sense. Too bad the context is there and exists. My grades became relevant when it was questioned. There seems to be some type of difficulty following along with conversations around here lately. If you're going to jump in, at least have the courtesy to follow along. I suppose I could scan my transcript if it would make you feel better, however I doubt it would. You'd probably end up feeling embarrassed and I'm not really willing to dish out the $10 to go pick it up, over an argument on the Internet. For the record, I don't take much of what Raze says personally. He just receives the same response (attitude, sarcasms etc) that he gives.

When i read Raze's statement, I chuckled. Chainsaws are very effective at cutting those pesky trees, more so than people and probably more so than anything else. Now it begs the question, what is guns most effective at these.... probably killing organic meatbags of some sort.

I still fail to see what business a chainsaw vs trees has in a discussion about shootings. The comparison is illogical.

And people completely ignore my post. I guess if they acknowledged it they couldn't continue to completely make it seem like it's a bigger deal than it actually is?

I agree with your post, for the most part. However, none of the things you listed is currently being widely debated (Worldwide I might add) due to recent events.

So people getting hurt in WORK accidents with their TOOL of necessity, being a chainssaw, is the same as accidentally getting hurt with a weapon that is absolutely not necessary and has not needed for any work(unless you're in Afghanistan, but then of course your weapon is being provided by your employer, ie the military)

All these incidents are as the title says accidents, nothing more nothing less. If they were per meditated or deliberate then there would be a story here. Otherwise it's just humans being humans .

To err is human to forgive is Devine.

Having never held or used a gun I will ask I thought when you removed the magazine you were supposed to empty the chamber, isn't this one of the first rules when using guns?

calling BS 5 and 3 different ones? erm major bs calling a set up here ... all these gun accidents and shootings are happening at time the government want them to happen ... im not a massive conspiracy theorist but come on all this stuff happening at the time the government wants guns gone or limited is a bit iffy.... still say they want guns removed so the people dont have the power to resist a take over

calling BS 5 and 3 different ones? erm major bs calling a set up here ... all these gun accidents and shootings are happening at time the government want them to happen ... im not a massive conspiracy theorist but come on all this stuff happening at the time the government wants guns gone or limited is a bit iffy.... still say they want guns removed so the people dont have the power to resist a take over

Wat.

Go read the news, there are news articles every week about either gun homicide or gun accidents.

  • Like 2

The difference isn't that these accidents are happening, look at the stats, they've been happening all the time, its just that they're being reported now.

No. It's clearly a government conspiracy, go away with your facts.

It's downright amazing the lengths people will go to in order

to take away someone else's Rights.

My analogy works because it's true. Just about anything can be used to kill someone,

and the reason we know this is because it has been used to kill someone. According to

multiple sources (don't be a sheep, do your own damn research), hammers have been

used more often than firearms to kill people in the United States. Are they being banned?

Nope.

And the whole "it wasn't designed to kill people" argument is equally stupid: clubs, knives,

axes... these items were invented TO KILL PEOPLE, the fact that they're also used to

break open nuts, slide and dice food, or chop down trees is merely a bonus.

Another reason my analogy works is because it points out that I'm being punished for the

misdeeds of someone else. If the Government decided to Ban cars, then everyone who

owns a car would suddenly become a criminal, not through any fault or misdeed of their own,

but simply because the Government decided it. And then when the Government comes for

your car, you'd cry like a baby at the injustice of having been punished and labeled a criminal

because SOMEONE ELSE decided to drive drunk, or just run someone over out of malice.

It's downright amazing the lengths people will go to in order

to take away someone else's Rights.

And what about the right for people to go about their lives without being shot? You see, the problem with rights is that one person's rights will inevitably intrude upon another person's rights and it is for the legal system to determine where one ends and another begins. Should people have the right to 100-round ammo drums for machine guns or is the risk to the public so great that they should be banned? Should people have the right to carry a concealed firearms or is that more likely to cause problems? Most other western countries have found a decent compromise but in the US many in the pro-gun crowd continue to behave like petulant children, throwing a tantrum every time someone tries to take away their toys.

It's downright amazing the lengths people will go to in order

to take away someone else's Rights.

My analogy works because it's true. Just about anything can be used to kill someone,

and the reason we know this is because it has been used to kill someone. According to

multiple sources (don't be a sheep, do your own damn research), hammers have been

used more often than firearms to kill people in the United States. Are they being banned?

Nope.

And the whole "it wasn't designed to kill people" argument is equally stupid: clubs, knives,

axes... these items were invented TO KILL PEOPLE, the fact that they're also used to

break open nuts, slide and dice food, or chop down trees is merely a bonus.

Another reason my analogy works is because it points out that I'm being punished for the

misdeeds of someone else. If the Government decided to Ban cars, then everyone who

owns a car would suddenly become a criminal, not through any fault or misdeed of their own,

but simply because the Government decided it. And then when the Government comes for

your car, you'd cry like a baby at the injustice of having been punished and labeled a criminal

because SOMEONE ELSE decided to drive drunk, or just run someone over out of malice.

So how many kids would have died at that Newtown school before the 3 staff members could have stopped a maniac running around with a hammer?

Hammer: at the most one life lost

Gun: 26

Clearly guns=hammers

And the whole "it wasn't designed to kill people" argument is equally stupid: clubs, knives,

axes... these items were invented TO KILL PEOPLE, the fact that they're also used to

break open nuts, slide and dice food, or chop down trees is merely a bonus.

I think you got that backwards, they were all created as TOOLS but people also use them for killing.

I think you got that backwards, they were all created as TOOLS but people also use them for killing.

No, necessity is the mother of invention. Weapons are defined as tools, and if there were

ever a reason to invent a new tool it's survival. And survival has always meant killing or

be killed.

So how many kids would have died at that Newtown school before the 3 staff members could have stopped a maniac running around with a hammer?

Hammer: at the most one life lost

Gun: 26

Clearly guns=hammers

Have you not been watching the news? A guy in China killed more kids with a knife (close-combat weapon

no better than a knife) than the guy in Newtown did with his guns. Do your research before you spout out bull****.

Do your research before you spout out bull****.

it is known that some people don't get it. Easier way for you: If you had to kill 20 people in a few mins, which would be the easiest way out of these choices: A) gun B) knives C) hands ? Hope this demonstrates the idea enough.

My analogy works because it's true. Just about anything can be used to kill someone,

and the reason we know this is because it has been used to kill someone. According to

multiple sources (don't be a sheep, do your own damn research), hammers have been

used more often than firearms to kill people in the United States. Are they being banned?

Your analogy fails because a gun us made to kill people, and most of them are made to specifically kill people not to hunt. And you're comparing it to a tool, and people getting hurt at WORK, in WORK accidents. not people getting hurt at trade shows and other places with their latest "toy", and yes a gun is not a toy, but that's how it's being used.

It's downright amazing the lengths people will go to in order

to take away someone else's Rights.

My analogy works because it's true. Just about anything can be used to kill someone,

and the reason we know this is because it has been used to kill someone. According to

multiple sources (don't be a sheep, do your own damn research), hammers have been

used more often than firearms to kill people in the United States. Are they being banned?

Nope.

And the whole "it wasn't designed to kill people" argument is equally stupid: clubs, knives,

axes... these items were invented TO KILL PEOPLE, the fact that they're also used to

break open nuts, slide and dice food, or chop down trees is merely a bonus.

Another reason my analogy works is because it points out that I'm being punished for the

misdeeds of someone else. If the Government decided to Ban cars, then everyone who

owns a car would suddenly become a criminal, not through any fault or misdeed of their own,

but simply because the Government decided it. And then when the Government comes for

your car, you'd cry like a baby at the injustice of having been punished and labeled a criminal

because SOMEONE ELSE decided to drive drunk, or just run someone over out of malice.

It's astounding that anyone would think that this is a reasonable argument.

Military grade firearms are far more destructive than every day house hold items. Hence why guns are used by police & military... & spree murderers. Yes people can kill with essentailly anything, but for quick & maximuim number of deaths, there is no question that a hammer isn't not going compare to an assault rifle. Spree murders wouldn't nesscarily stop with out a gun available, but the amount of deaths would greatly be reduced.

You should note the recent spate of school knife attacks in China. The last of which happened on the same day as the Sandy Hook shooting... Except with 20+ people stabbed no one died in China. Infact if I remeber correct over the last three years there has been 10 such attacks in China in which the total death count is about equal to that in the Sandy Hook shooting alone.

(don't be a sheep, do your own damn research)

Do your research before you spout out bull****.

I'd be more inclined to listen to you if you were capable of doing your own research properly, before accusing others of being sheep and not doing their own. Your mention of the China knife attack is incorrect. There were 23 injured, not killed. I suppose that doesn't really help your argument though so it seems fitting that you would distort the truth.

Even if you take into account the last attack (Monday), one person died. Hardly a "massacre". I suppose maybe the if the attacker had a hammer, he might have been able to do more damage. :rolleyes:

Ridiculous analogies are ridiculous, no matter how well you've convinced yourself. A gun is a gun and it is designed to kill. That is it's main function and purpose.

No, necessity is the mother of invention. Weapons are defined as tools, and if there were

ever a reason to invent a new tool it's survival. And survival has always meant killing or

be killed.

Have you not been watching the news? A guy in China killed more kids with a knife (close-combat weapon

no better than a knife) than the guy in Newtown did with his guns. Do your research before you spout out bull****.

What bull****? I just replaced a gun in that Newtown tragedy with a hammer. It wasn't my analogy to begin with, I just showed how stupid you sound when you compare objects which are not weapons with guns. Oh and now we can use outside/foreign examples? I thought only Americans can opine on second amendment and all foreigners have no place in this debate. So anything happening outside US is off the bounds such as strict gun laws in other countries which have next to no such massacres.

  • Like 1

Have you not been watching the news? A guy in China killed more kids with a knife (close-combat weapon

no better than a knife) than the guy in Newtown did with his guns. Do your research before you spout out bull****.

Do YOUR research before you spout out bull****.

No kids are dead in that Chinese knife attack.

Can't believe you have the audacity to tell other people not spouting bull**** while you spouting bull**** without a blink of an eye.

Don't know which one is worse, your stupidity or you think all those kids are dead.

  • Like 2

Have you not been watching the news? A guy in China killed more kids with a knife (close-combat weapon

no better than a knife) than the guy in Newtown did with his guns. Do your research before you spout out bull****.

Killed or slashed???

http://worldnews.nbc...s-in-china?lite

Here is a list of knife attacks on school children in China, none of which were as bad as the Newtown killings. http://en.wikipedia....10%E2%80%932012)

At least be honest here, slashing kids is bad but killing kids is far worse.

  • Like 1
This topic is now closed to further replies.
  • Posts

    • Microsoft brings Claude to its own Azure infrastructure, powered by Nvidia GB300 Blackwell by Karthik Mudaliar Anthropic's Claude models are now generally available in Microsoft Foundry on Azure and are running on Nvidia's GB300 Blackwell Ultra systems. Nvidia wrote in its announcement that the models are hosted on Microsoft Azure and accelerated by GB300 Blackwell Ultra GPUs, with Quantum-X800 InfiniBand networking used to support larger agentic systems and specialized sub-agents that can operate across business domains. This is great for customers and enterprises that want to build autonomous and domain-specific AI agents using Claude without moving outside Microsoft’s cloud platform. Microsoft currently offers Claude models in Foundry in two forms: “Hosted on Azure,” which runs end-to-end on Azure infrastructure and is generally available, and “Hosted on Anthropic infrastructure,” which remains in preview. This separation is quite important for organizations that have procurement, compliance, data processing, or internal governance requirements tied to Azure. Anthropic currently has 11 Claude models listed in Microsoft Foundry, including Opus 4.8, Sonnet 4.6, and even the unavailable Mythos and Fable models. Billing is handled through Claude Consumption Units (CCUs). Microsoft says CCU is an invoicing unit for Claude models in Foundry, with token usage converted using Anthropic’s published per-model token rates. The usage is billed through Azure Marketplace just like models from other distributors and appears on the customer's Azure invoice, while eligible spend can count against a Microsoft Azure Consumption Commitment. For starters, GB300 NVL72 is a rack-scale, fully liquid-cooled system that combines 72 Blackwell Ultra GPUs and 36 Grace CPUs. Nvidia has listed 37TB of fast memory, 130TB/s of NVLink bandwidth, and FP4 Tensor Core performance of up to 1,440 petaflops with sparsity. The deal is also part of a three-way partnership between Microsoft, Nvidia, and Anthropic. Under the deal, Anthropic has committed to buying $30 billion in Azure compute capacity and contracting additional capacity up to one gigawatt. Nvidia and Microsoft also said they would invest up to $10 billion and $5 billion in Anthropic, respectively.
    • WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
    • When I think about a network, there are really two aspects, the hardware and the wiring. So here is what I would do for both. Wiring: Use Cat6A for the patch panel, outlets, and all structured cables (cables installed in walls). Run plenty of Wireless Access Point (WAP) cables, as a general rule, assume a signal can only pass through 2-3 walls and can't pass through a floor (that is conservative, but trust me on this if you want strong WiFi)  Cat6 patch cables are fine for now if you don't plan to run 10gig, those are easy to replace later if needed. Run OS2 single-mode fiber to anywhere you think you may have a server or sub-switch. (yes, single-mode for everything on a small network, don't mess with multimode unless you are at a scale where that minor cost and power savings will matter). If you really want to future proof, also run fiber to any high density WAP locations, it is likely that WiFi 8 and beyond WAPs will push the limits of 10g. Run 6-12 pairs of single-mode fiber between your MDF and the building's MDF, even if you only need 1 or 2 pairs now, those extra pairs will pay off down the road. Hardware: (its easy to say "get all the features incase you need them", so instead of futureproofing, I am going to take approach of suggesting areas worth investing in, and areas you can save money). Don't overspend thinking you need every feature on every port. You don't need 10g on every port, you don't need PoE on every port. Don't overspend on redundancy either, unless you are ready to buy two of everything, don't waste money buying two of some things and not others. Dual power supplies are worthwhile, but probably not HA or multi-path redundancy.  Get 1 "distribution layer" switch that your router/firewall will connect to as well as all your access layer switches below. This should be a fully managed 10g+ switch with a combination of copper and SPF ports, a few 25g uplink ports are nice for this switch. Given that you said it is a small network, I suggest also using that distribution layer switch for servers and WAPs, meaning it will need PoE. Speaking of wireless, get good professional tri-band WAPs, and either turn on the band stirring options, or limit 2.4 to an IoT only SSID. This will provide a solid WiFi capable nearly everything but the highest of bandwidth clients...you could even consider skipping wiring workstations depending on usage. Access layer switch for workstations and printers can be cheaper switches, 2.5g is a good sweet spot between price and future proofing, but even 1g is fine for most individual clients (the kind that could probably be fine on WiFi). You can consider saving a little on access layer switches by only getting 1 PoE switch for whatever needs it (remember your WAPs are connecting to the distribution switch, not here), and non-PoE for your workstations, because desk phones are falling out of favor. You can also save money here by not buying managed switches if you don't need them--but really do some soul searching there, if you go this route, then anything that isn't on your workstation VLAN would either need to be connected to the distribution switch, or its own access layer switch. Also, don't feel like you need a fancy fabric stacking switches for your access layer, that is the point of the higher-end distribution layer, to remove the need for things like that at this level. Home Hardware: I'm realizing the above assumed an office setting, if this if for your house and home lab then the above still applies, but you'll probably want everything managed and PoE, just because, but you probably also don't need multiple access layer switches. If your total port count is below 24, just skip separating distribution layer and access layer and just get one nice switch with the features you want. If you are at the point of considering a 48-port switch, I would instead get a nice high-end distribution switch for things that need it, and cheaper access layer switches with specs based on the needs of connected devices. For home use, don't worry about home running every device to the main switch, there is nothing wrong with running sub-switches for your media areas and office, those essentially become your access layer, just look for sub-switches with a 10g uplink so sharing bandwidth isn't an issue. Just make sure you always connect them to your distribution/main switch, don't daisy chain, the path should never have more steps than Client>Access>Distribution>Firewall>Internet or Client>Access>Distribution>Server if it is local.
    • Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers by Karthik Mudaliar Google's Gemini-powered "Take notes for me" feature inside Google Meet is now available to Google AI Pro and Ultra subscribers. The features work on Google Meet for web as well as on mobile, and Google says that subscribers can use it for meetings they host in many supported languages. As the name suggests, "Take notes for me" allows Gemini to listen to a meeting, generate a summary, identify action items, and save the notes as a Google Doc in the user’s Drive. After the meeting, the organizer receives an email recap with the summary and action items, while the notes can also be attached to the related Calendar event depending on the meeting setup and sharing settings. The feature isn't automatically turned on for everyone, though. Google says that all meeting participants are notified when note-taking is turned on, and users can start it from the pencil icon in Meet or enable it for future calls through Meet’s meeting records settings. For work or school accounts, administrators can also control whether the feature is available and may require explicit participant consent for note-taking, recording, or transcription features. The feature first launched back in 2024, when it was available just for selected Workspace users. Over the years, Google added refinements and more options, including the ability to enable it when scheduling meetings via Google Calendar. Google's support docs say that the feature currently supports English, French, German, Italian, Japanese, Korean, Portuguese, and Spanish, but only one language at a time. Meetings with multiple spoken languages are not currently supported, and Google recommends using the tool for meetings between 15 minutes and eight hours. The new feature makes Google Meet closer to its rivals that have AI tools already built in. Microsoft Teams has recently started offering Copilot and intelligent recap features that summarize meetings, surface highlights, and help with follow-ups, while Zoom’s AI Companion can also generate meeting summaries from desktop and mobile meetings.
    • GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!