CPU Fan Too Loud. Even the Second Fan Is Too Loud!

By Pubudu Kodikara
in Hardware Hangout

 Share

Recommended Posts

Collaborator

Pubudu Kodikara

Posted
Posted

I have a Core i3 Desktop PC. Recently, I noticed that the CPU fan is too loud. I replaced it with a new one. The new fan is also loud. But, the new one goes to full speed and scream loudly at boot and then settles. There's no over heating issues and the CPU seems to be fine. Im using an H61MX Foxconn motherboard. Is it a problem with the board? Do I have to replace it? Any software to test the board for defects?

Collaborator

Pubudu Kodikara

Posted
  • Author
Posted

What kind of cooler You have?

A standard Intel Cooler. The original CPU cooler came for the CPU. At first, it didn't give me such a big sound. But now its coming. Just bought a new one... Its also an original intel cooler. It also have the loud noise and its the one which go full speed at boot and then settles.

Grand Master

Semtex

Posted
Posted

Go into Your BIOS-> find something like Hardware Monitor or similar -> change CPU fan speed to, for example, 50% set temperature limit to 50?C, save changes and reboot.

Personally I advice You to change this stock Intel cooler, for something with 120mm fan, temps will be lower and less noise around ;)

Grand Master

Charisma Veteran

Posted
  • Veteran
Posted

Yeah, people have already mentioned what I was going to suggest--check the heatsink and thermal paste and make sure nothing's come loose or gotten dusty/gunked up, then check what options you have for it in the BIOS. If something just recently changed than it's more likely along the lines of the first idea than the second.

Grand Master

sc302 Veteran

Posted
  • Veteran
Posted

Well as it was explained to me, even though your temps are normal what is keeping it normal is the speed of the fan (to increase cooling). Higher fan speed = equals more noise = what the computer needs to keep it at that temp.

There could be other environmental issues going on, improper heat sink conductivity, lots of dust, or decreased air flow in the case either by obstructions in or around the case or putting it into a sealed cabinet or a cabinet that has no air flow.

Computers need to breathe. Even water cooled needs to breathe, although they require less fan speed to keep them cool which means they are generally quieter.

Collaborator

Pubudu Kodikara

Posted
  • Author
Posted

There's no dust... I have cleaned everything! The temperature is normal... I have even used a new thermal paste. With the old fan, the cpu temp went upto 65C recently with the loud sound. Then I applied a new thermal paste and the heat came down to 37 to 45 C. Now for the new CPU fan also I used a new thermal paste!

Collaborator

Pubudu Kodikara

Posted
  • Author
Posted

Go into Your BIOS-> find something like Hardware Monitor or similar -> change CPU fan speed to, for example, 50% set temperature limit to 50?C, save changes and reboot.

Personally I advice You to change this stock Intel cooler, for something with 120mm fan, temps will be lower and less noise around ;)

I did it... Now through the HW Monitor (From CPID) I can see the temp is between 31 and 40. Now the fan is becoming loud and then going normal... increasing and decreasing....

Grand Master

Semtex

Posted
Posted

When Your CPU temp rise then fan speed also rise. Quite normal. Change this cooler, for some about 29$ you can get http://www.newegg.com/Product/Product.aspx?Item=N82E16835233082 Gaia, quite good cooler and not expensive, set fan speed under 1000rpm, Your temps will be under 30?C in idle.

I was use this cooler with my i52500k OC to 4.4 GHz and under OCCT I've hit maximum 69?C on hottest core.

Collaborator

Pubudu Kodikara

Posted
  • Author
Posted

When Your CPU temp rise then fan speed also rise. Quite normal. Change this cooler, for some about 29$ you can get http://www.newegg.co...N82E16835233082 Gaia, quite good cooler and not expensive, set fan speed under 1000rpm, Your temps will be under 30?C in idle.

I was use this cooler with my i52500k OC to 4.4 GHz and under OCCT I've hit maximum 69?C on hottest core.

Will it be too big for my casing?

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Ocenaudio 3.19.5

      By Copernic · Posted

      Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Limited Prime Day deal sees Amazon Echo Show 11 is at its lowest price yet

      By ad47uk · Posted

      I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval

      By ad47uk · Posted

      I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval

      By ad47uk · Posted

      So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • Windows 11 is getting redesigned taskbar settings in new build

      By thartist · Posted

      I wonder what that line really meant...

  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!