Recommended Posts

think im going to need an upgrade for that game engine, im thinking 8950 when it comes out :D

Depends on what you currently run. My 7950 rocking average of 110 fps in 64 players fights in metro on these settings: http://i.imgur.com/3Zmtce0.jpg

 

I think it will do just fine for BF4.

Just pre-ordered BF4 arrrggghhh :P cant bloody wait. Got the normal edition off amazon.co.uk ?30.99 (screw origins ?45) includes china rising expansion pack to because its a pre-order and spose itll have 1 gold battlepack or someat.should be delivered on 1st November :D

 

Just need an 3GB 8950 now and ill be all set, me 1GB 6870 just wont cut it anymore. can play metro last light on max settings but think im only geting 25-30fps out of it and it struggled on BF3 on high particle dense scenes well struggle i should say crippled prolly hit 2 fps :( its 3 years old done me proud but time for an upgrade than can last another few years :D  no way it could handle 64 multiplayer with all the destruction going on around it and the tesselation of the seas, building falling down helicopters and fighter jets flying round etc i want super max ultra setting :d

Just pre-ordered BF4 arrrggghhh :p cant bloody wait. Got the normal edition off amazon.co.uk ?30.99 (screw origins ?45) includes china rising expansion pack to because its a pre-order and spose itll have 1 gold battlepack or someat.should be delivered on 1st November :D

 

I'd see if you can get a refund. For ?35 you can get the game with the premium at Zavvi: http://www.zavvi.com/games/platforms/pc/battlefield-4-free-premium-expansion-dlc-when-you-pre-order-now/10790705.html

is it all the expansion packs or just china rising?

 

dont need get a refund cus amazon doesnt charge you until it ships

The China Rising is for those that pre-ordered. So yes and you also get:

  • Five digital expansion packs featuring new multiplayer maps and in-game content
  • Two-week early access to all expansion packs for an edge on the competition
  • Exclusive personalization options including camos, paints, emblems, dog tags and more
  • Priority position in server queues
  • New content every week
  • 12 bonus Battlefield 4 Battlepacks

And don't charge the full amount upon pre-order, but do charge a fee. Never pre-ordered on Amazon, so don't know how much is it (usually it's 1-5 dollars).

Battlefield 4 will include a practice range for learning to fly helicopters and jets

 

 

Not to brag, but I?m really good with jets and helicopters in Battlefield 3. By which I mean: I?m terrible at flying them, so I don?t bother trying. I could attempt to learn, but that would mean taking a valuable asset from my team, and then crashing that asset into a lake, or windmill, or enemy rocket. That?s why it?s nice to hear that, for Battlefield 4, DICE are planning to include a ?test range? to make such airborne humiliation less public.

 

?We?ve definitely heard that people are afraid of getting in there [and using vehicles like helicopters] and that?s not our intent,? says DICE creative director Lars Gustavsson in an interview with IGN, ?so what we?ve done is, we?ve added a test range, which allows you to try out all the hardware ahead of time.?

 

?If you want to learn to fly a helicopter,? he continues, ?you can get in there and you can find the settings that work best for you. And then start doing some stunt flights just to feel safe before you go out and get the responsibility of a bunch of other people sitting in your helicopter. So I truly hope that this will help people feel more safe about trying out the whole battlefield.?

 

It?s a great (and some would say staggeringly obvious) idea. Now you can practice away to your hearts content, build up the needed confidence to show off you skills, then choke under pressure, clip the tail of your helicopter on a building, and kill your entire squad. Or, if you?re not a nervous multiplayer pessimist, you could help win a key location that?s integral to your ultimate victory.

 

Check out the full IGN interview for more design decisions, and Gustavsson?s admission that a dinosaur mode ?sounds extremely sexy?.

http://www.pcgamer.com/2013/09/04/battlefield-4-will-include-a-practice-range-for-learning-to-fly-helicopters-and-jets/?utm_source=fb&utm_medium=emp

  • Like 1

I asked Battlefield's FB to keep HC and SC stats separate on BF4's Battelog and they replied.

 

A request: Please keep hardcore and softcore stats separate on BF4's Battlelog! I have friends in both modes and I play differently depending on which mode I'm in. For me, softcore = all out objective play, do whatever it takes. Hardcore = DO NOT DIE. I try to play it realistically. I'd love to see these stats separately. Thank you.

 

great point here. We'll take this into consideration, thank you.

 

Woot woot!

I asked Battlefield's FB to keep HC and SC stats separate on BF4's Battelog and they replied.

 

Woot woot!

 

That is actually a good idea. Hope they roll that in at some point. 

 

I do the same thing with approaching normal / hardcore modes differently. Even load outs are quiet different.

Why is it there, if you can't even download the ebta yet :huh:

 

Because EA.

 

Wonder if they'll remake Dragon Valley seeing as it's a China themed expansion - I basically used to play nothing BUT Dragon Valley on BF2.. it was my favourite map by miles.

 

I suggested a BF2 map pack like what we got for BF3 on reddit to the developers including 4 BF2 Chinese maps; Dragon Rising, FuShe Pass, Daqing Oilfields and Great Wall. It got down voted and I was called a moron. 12 year old target audience don't want them.

For the first time in my life, I'm going to play a game with the minimum specs. :|

I find it funny I meet recommended when I wasn't planning to upgrade my vidcard or RAM before the X1 but ended up doing it anyway.

 

Not sure which system I'll play on...probably the X1.

The alpha ran terribly on my computer (Can we say that now? Is there still an NDA?), but the minimum specs above give me hope that I'll be able to run it at somewhere near medium settings. (Well - that'd be the upper limit I guess, because I currently run BF3 at medium settings with tweaks here and there).

 

What I'm really looking forwards to are more powerful AA weapons. It gets old very fast when a single enemy jet can control the entire map, racking up insane killstreaks. (I once killed a jet flown by a 100 colonel with something very close to a 150 k/d. That took a lot of effort, and a lot of cannon shells from my LAV-AD...).

 

But even if the missiles are not more powerful, I'd be happy if the probability of them actually hitting the jet you've locked on to was increased. Flares don't work 100% of the time in real life, and ECM/chaff has no effect whatsoever on IR-guided missiles - so I don't understand why in BF3, it can be so hard to a) get a lock and b) successfully kill a jet..

^ What's your specs that you ran the alpha on? I can't imagine Frostbite 3 being that different from the previous version, which was well optimized. When BF3 beta was released, I remember it did well on one of my others pcs that still had a C2D processor (can't remember for sure, but I think it was E6300) and HD 5770 for GPU with 4 gigabytes of ram. In the final release it (the performance) only got better.

 

 

Awwww shucks.....

 

Intel Core i5-3570K 3.4GHz

XFX Radeon HD 7850 XFX DD Black Edition 2GB

Kingston 16 GB DDR3 1600MHz

Windows 8 64bit

 

:(

Don't worry, it will do just fine. I'm not that ahead of you and I'm not worried.

^ What's your specs that you ran the alpha on? I can't imagine Frostbite 3 being that different from the previous version, which was well optimized. When BF3 beta was released, I remember it did well on one of my others pcs that still had a C2D processor (can't remember for sure, but I think it was E6300) and HD 5770 for GPU with 4 gigabytes of ram. In the final release it (the performance) only got better.

 

 

Don't worry, it will do just fine. I'm not that ahead of you and I'm not worried.

I only have a laptop, which is probably the reason behind why it didn't run very well, but I was surprised at just how bad it ran. 

 

The specs on it are  i7-3630QM , Geforce GT 650M and 8gb ram, so it's a decent laptop, but I'm not expecting too much out of it. BF3 gets solid 60FPS at medium settings and not quite sure what resolution (720p maybe? or maybe 1680*1050 at most, definitely not 1080p though), and I'm perfectly happy with that. If I can get that in BF4, I'll be a very happy person.

This topic is now closed to further replies.
  • Posts

    • Would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      83
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!