Ubuntu 13.04 'Raring Ringtail' released


Recommended Posts

I kinda suspected that. I haven't tried removing services or building out a minimal install because I have no interest in running Ubuntu full time; I just like to keep up with its development and try new releases because it is very popular and closely related to the distro I contribute most heavily to.

That's interesting. Why would you say that? All throughout the SysVInit vs. Systemd debate in Debian and elsewhere I have not heard anyone offer an argument (not to mention a convincing argument) that Upstart is superior to Systemd. The best justification of Upstart I have heard yet is that it preceded Systemd, so Upstart is justified being in a less advanced state. Even then I have not heard an argument for its adoption outside of Ubuntu, although some argue that it is acceptable for Ubuntu to stick with it by virtue of the fact that it is already in place and migration would be an unnecessary hassle.

I think you misunderstood my post (I may have worded it poorly). I didn't say upstart is superior to systemd, I said systemd is indeed better than upstart, but that I do think both of them are much better than sysvinit.

I didn't say upstart is superior to systemd, I said systemd is indeed better than upstart, but that I do think both of them are much better than sysvinit.

Oops. I misread your post. I thought I was going to get an interesting explanation that I've never heard before. It turns out that I actually agree with your point.

What kind of problems?

Well when I rebooted after updating, I was greeted with the lxde login manager. Put in my credentials and got nothing. It won't boot to the GUI no matter what desktop I pick. So finally, I hit ctrl+alt+f2 for a terminal and ran startlxde but it gives me an error about connecting to the display. So I ran startx instead and it required me to install gnome. So now Im stuck running gnome-shell (which I can't stand) because nothing else will work. And this is the only way I can get it to login, too. Now I run lxpanel after booting so that I can have some sort of comfort of normalcy, and the menu has no icons.

Well when I rebooted after updating, I was greeted with the lxde login manager. Put in my credentials and got nothing. It won't boot to the GUI no matter what desktop I pick. So finally, I hit ctrl+alt+f2 for a terminal and ran startlxde but it gives me an error about connecting to the display. So I ran startx instead and it required me to install gnome. So now Im stuck running gnome-shell (which I can't stand) because nothing else will work. And this is the only way I can get it to login, too. Now I run lxpanel after booting so that I can have some sort of comfort of normalcy, and the menu has no icons.

Sounds like your upgrade is b0rked, I'd try a clean install...

Good, although it tuns like crap on my daughters PC

Give Lubuntu a go (or, install LXDE and log into that). GNOME and KDE are pretty resource intensive.

boot speed has never been a linux forte.

I once had my Linux boot time down to 10 seconds (but I wasn't using GNOME or KDE)...

Many people have forgot that Linux is all about customization - it gives you so many more options than other OSs. You probably couldn't tell what distro I am using if I were to post a screenshot.

Many people have forgot that Linux is all about customization - it gives you so many more options than other OSs. You probably couldn't tell what distro I am using if I were to post a screenshot.

Geeks tend to forget that most people don't want to spend hours and days "customizing" their computers or phones, they just want them to work. heck It's starting to annoy me as well when I can't just install and get going.

I was hoping to avoid that so I dont lose 200gb+ of torrents.

Why would you lose all your data?

Remove all folders but /home/ and /root/ (assuming you only store stuff there) and then do a normal install without formatted = no lost data.

Well when I rebooted after updating, I was greeted with the lxde login manager. Put in my credentials and got nothing. It won't boot to the GUI no matter what desktop I pick. So finally, I hit ctrl+alt+f2 for a terminal and ran startlxde but it gives me an error about connecting to the display. So I ran startx instead and it required me to install gnome. So now Im stuck running gnome-shell (which I can't stand) because nothing else will work. And this is the only way I can get it to login, too. Now I run xpanel after booting so that I can have some sort of comfort of normalcy, and the menu has no icons.

I have EXACTLY the same problem doh! Although I am loving the subtle but well done graphical changes to Ubuntu this time round. :D

Remove all folders but /home/ and /root/ (assuming you only store stuff there) and then do a normal install without formatted = no lost data.

Im assuming this is some kind of configuration issue which likely means it's somewhere in my /home folder. I've thought of deleting the .cache and .config folders as well as the ones for lxde and the other DEs but Im not sure itd make a difference.

Buy an external drive and back everything up? You can get a 2TB drive now a days for 70 bucks.a

I know that. But I really don't have the money for it. I have space on my desktop but its a lot of work to move the data there and then back afterwards and getting the client to pick it up after too.

Edit: Someone suggested I switch to lightdm instead of lxdm and now everything works as normal. Not sure what the hell is wrong with lxdm.

Im assuming this is some kind of configuration issue which likely means it's somewhere in my /home folder. I've thought of deleting the .cache and .config folders as well as the ones for lxde and the other DEs but Im not sure itd make a difference.

I know that. But I really don't have the money for it. I have space on my desktop but its a lot of work to move the data there and then back afterwards and getting the client to pick it up after too.

Edit: Someone suggested I switch to lightdm instead of lxdm and now everything works as normal. Not sure what the hell is wrong with lxdm.

How do you do that? ...

I have 12.10 now.I wanted to upgrade , But I prefer new install for vanilla, complete experience.

the only thing I need to know is how to backup my Home directory.Any Ideas?

You could do one of a couple things. If your home directory is on its own partition (which is not default in Ubuntu AFAIK), you can simply reinstall without formatting that partition. If not, you can use the method n_K suggested earlier in this thread and delete everything other than /home using the live install disc before you perform the new installation. Using that method you would need to make sure you install to the original partition without reformatting it! You could also copy your home directory to another EXT4 partition while maintaining permissions, then copy it back after the installation.

The last solution is the most time intensive but least risky. You could implement it as follows:


# Set this variable for convenience so you can just copy/paste the rest of the backup commands.
export BACKUP_DRIVE_NAME=<your_backup_drive>

# Backup your home directory to another EXT4 volume, maintaining permissions and attributes.
cp -a $HOME /media/$BACKUP_DRIVE_NAME/$USER

# Backup your user id and effective group id.
echo "backup_date: $(date)" > /media/$BACKUP_DRIVE_NAME/backup_info
echo "user_name: $USER" >> /media/$BACKUP_DRIVE_NAME/backup_info
echo "user_id: $(id -u)" >> /media/$BACKUP_DRIVE_NAME/backup_info
echo "user_group: $(id -g)" >> /media/$BACKUP_DRIVE_NAME/backup_info



# Install Ubuntu 13.04, wiping everything on your system (other than your backup drive, of course).



# You need to set this variable again since you closed your previous terminal window (and installed a new system).
export BACKUP_DRIVE_NAME=<your_backup_drive>

# Check your new user id and group id.
cat /media/$BACKUP_DRIVE_NAME/backup_info
echo "new_user_id: $(id -u)"
echo "new_user_group: $(id -g)"

# If your new user id and new group id match the old, run the following command.
cp -a /media/$BACKUP_DRIVE_NAME/$(cat /media/$BACKUP_DRIVE_NAME/backup_info | grep 'user_name: ' | cut -d ' ' -f 2)/* $HOME

# If your new user id or new group id do not match the old, run the following commands.
sudo cp -a /media/$BACKUP_DRIVE_NAME/$(cat /media/$BACKUP_DRIVE_NAME/backup_info | grep 'user_name: ' | cut -d ' ' -f 2)/* $HOME
export NEW_USER_ID=$(id -u)
export NEW_GROUP_ID=$(id -g)
sudo chown -R ${NEW_USER_ID}:${NEW_GROUP_ID} $HOME
[/CODE]

Just installed Xubuntu 13.04 on my 2Y. old Netbook: Dell inspiron mini 1018 and it Rocks.very light, productive

I love it on my netbook

Yeah I've switched over both my laptops over to xubuntu 13.04, its great. Very stable, much less buggy than unity.

Xubuntu annoys me because it doesn't support "snap" by default, and xubuntu 32 and 64 is what I put on my multiboot tool for linux OS'

Actually, it does and its enabled by default. there's just another poor default set that breaks snapping to the left/right because the setting to move the window to another virtual desktop when you drag to the left or right is enabled by default. You simply need to go to settings > window manager > advanced and disable "Wrap workspaces when the pointer reaches a screen edge", and then snapping left/right/up/down all works.

I think that default should be changed, but its not a huge deal because the setting can easily be adjusted.

Running Xubuntu 13.04 now. A funny story on why I installed it instead of Lubuntu. I was all set to install Lubuntu and I decided to try Xubuntu one last time. A friend of mine came over and he saw it running and was blown away. So I decided to install that instead and I'm glad that I did. It really is awesome. Got Virtualbox installed with Windows 7 for those times I need it. Running just great.

This topic is now closed to further replies.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!