Recommended Posts

China Unveils Its First and Unnamed Moon Rover

 

Chinese scientists described the country's first moon rover on Wednesday and invited the global public to come up with a name for it.

Zhao Xiaojin, director of the aerospace department of the China Aerospace Science and Technology Corporation, depicted the lunar rover an orbiter adaptable to harsh environments; a highly efficient and integrated robot; and a high altitude "patrolman" carrying the dreams of Asia.

The Chang'e-3 mission to moon, named after a Chinese lunar goddess, will take place in December, when a Chinese spacecraft will soft-land on a celestial body for the first time.

The rover has two wings, stands on six wheels, weighs 140 kg and will be powered by solar energy.

"When it arrives in lunar orbit on board a lander, the rover will choose the best landing site and gently touch down the moon's surface, using optical and microwave sensors to avoid rocks and craters," Zhao said.

The rover will "select the best route, use minimal fuel and make the smallest possible error" during landing and is capable of hovering to steer clear of obstacles, he said.

Domestic and overseas compatriots can submit their proposed names for the rover through the Internet and the official name will be announced in November after an online poll on the selected proposals.

Li Benzheng, deputy chief designer of China's lunar probe program, said the name of the rover should express the wishes of Chinese at home and abroad, feature the modern and national traits to inspire people.

Li noted the rover will recognize obstacles on the moon's surface, and plot a path of least resistance by a combination of onboard navigation systems and remote control from the command center.

 

Source and more

 

A visitor takes photos of a 1: 8 scale model of Chang'e 3 moon rover on September 25, 2013. A public naming campaign was launched for the moon rover on the same day in Beijing which will be lunched by the year end. [Photo: China News Service/ Sun Zifa]

post-338470-0-58941200-1380157823.jpg

Perhaps if the Chinese bring it down near enough to the US landing sites there will finally be irrevocable proof for all the doubters that the Americans actually landed on the moon.

 

61bff888ece5ba3a396166734f387151.png

  • Like 2

Take pics of the American flag while you're there China :D

 

Those flags will now be completely white. It's not really about the US anywho  :)

 

 

Perhaps if the Chinese bring it down near enough to the US landing sites there will finally be irrevocable proof for all the doubters that the Americans actually landed on the moon.

 

 

That evidence already exists but people choose to disbelieve it. 

  • Like 2
  • 2 months later...

China has launched its Jade Rabbit lunar rover (y)

http://mobile.nytimes.com/2013/12/02/world/asia/china-prepares-to-launch-moon-rover-mission.html

HONG KONG ? China?s latest display of ambition in space involves sending a Jade Rabbit roaming across the Bay of Rainbows.

A rocket blasted off from southwest China early Monday, carrying the country?s first robotic lunar rover, the Jade Rabbit, which will explore a plain on the moon that, despite its colorful name, is a dark expanse of hardened lava.

If successful, the Chang?e-3 mission will be China?s first ?soft landing? on the moon ? which allows a craft to operate after descending ? and the first such landing by any country since 1976, when the Soviet Union sent a probe. The last American expedition on the moon?s surface was a manned visit in 1972. Chinese state-run television broadcast footage of the rocket?s untroubled launch and ascent into space, where the Chang?e-3 craft set off toward the moon.

>

> (several paragraphs of political crap)

>

For the Chang?e-3 mission, the rover ? a solar-powered, six-wheeled vehicle similar to ones the United States has sent to Mars ? will spend three months exploring, using radar to collect data on rocks up to 328 feet below the surface, Ouyang Ziyuan, a senior consultant to the mission, told China?s state-run Xinhua news agency. A future mission that could take place in several years would be intended to bring back rocks and other samples from the moon.

_71346983_ca42f4f0-38c4-4c74-9a0f-86a74a

post-774-0-72105400-1385935108.jpg

Firing thrusters after booster separation. The Trans-Lunar Injection burn was appatently successful.

post-774-0-75410600-1385934962.jpg

Landing successful. Rover deployment tomorrow. These images are just a few of the 59 taken. May get he over the next day or so.

 

 

I guess they couldn't wait till tomorrow...

 

China's Jade Rabbit robot rover has driven off its landing module and on to the Moon's surface.

The robotic vehicle rolled down a ramp lowered by the lander and on to the volcanic plain known as Sinus Iridum.

Earlier on Saturday, the landing module containing the rover fired its thrusters to perform the first soft landing on the Moon since 1976.

The touchdown in the Moon's northern hemisphere marks the latest step in China's ambitious space programme.

The lander will operate there for a year, while the rover is expected to work for some three months.

More at source:  http://www.bbc.co.uk/news/science-environment-25384057

China should start putting the same amount of quality into their Chinese made for USA products as their space equipment!

  • 1 month later...

http://www.spacedaily.com/m/reports/Farewell_to_Yutu_999.html

Farewell to Yutu

By now, it seems almost certain that China's Yutu Moon rover has died a premature death in the cold lunar night. The rover has been exposed to sunlight for a few days, and there has been no word of it waking up.

Yutu was carried to the Moon aboard China's Chang'e-3 Moon lander, a boxy structure reminiscent of the base of an Apollo lunar lander from the 1960s. Chang'e-3 made history by becoming China's first mission to land on the Moon, and the first object to softly land there in more than three decades.

Yutu's problems began roughly three weeks ago when a solar panel failed to fold inwards over the rover's body, just before night fell at the rover's landing site. The folding panel was designed to protect the rover's interior during the two-week lunar night, by trapping heat from a radioisotope source. Without this protection, the rover's electronics have apparently frozen.

China had originally expected Yutu to function for roughly three months. The failure of Yutu after less than a month of nominal surface operations is a disappointment.

Apart from mourning its loss, the major priority for China's space program will be conducting a post-mortem for Yutu. It is vital to know how it malfunctioned. Fortunately, there seems to be a lot of data that was obtained before night fell.

We know that the solar panel did not close. We can easily deduce how this affected the thermal protection for the rover. Much work will need to be performed to work out exactly why this mechanical failure occurred in the first place.

Moving parts are always tricky for spacecraft. Getting them to work on the Moon is even more difficult. Apart from the vicious cycles of heat and cold, there is the ever present problem of dust. We do not know if the hinges were jammed by dust, or if there was a failure of the motors or mechanisms designed to close the panel for some other reason. Lubricant could have been worn away from some part, causing friction or even a "cold welding" of metal surfaces in a vacuum. China will probably be conducting simulations to determine the most likely cause.

With Yutu's case file certain to close in the near future, it will be time to consider the fate of China's next Moon mission. China has already built a back-up lander, dubbed Chang'e-4, which it planned to launch in a few years. This is a typical strategy of China's lunar exploration program: Two identical spacecraft are built in case one fails.

>

>

This topic is now closed to further replies.
  • Posts

    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
    • >Improved system sounds when using Windows in dark mode. The story behind that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • > The G 7 Pro supports wireless (XBOX Wireless, proprietary dongle, or Bluetooth) If anybody else's brain translates this to 'it works wirelessly on Xbox', according to the linked product page, it does not.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      442
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!