Xbox One 50Hz TV signal judder explained


Recommended Posts

This is my reasoning why I think my TV is OK, the signal comes out of my cable box at 50hz it then goes into the HDMI in on the X1 and from what I understand it must be getting converted to 60hz and then sent to the TV via the HDMI out. Now this is the same HDMI out that is used to play games on, so that would be 60hz to and I don't have an issue with any freezing or stuttering with that.

So surely that must rule out the TV?

Let's stay on topic guys. MS isn't the only US based company that targets the US first and leaves most of the rest of the world out with it's services. I don't get Netflix, I don't get Hulu, I don't get lots of web services. Hell my country just got Spotify last month ffs. All we can do is wait for them to expand to our market. Let's not single out one company like they're the only ones doing it, lots are.

Bit different, those are either much smaller companies or are us specific cable providers. Microsoft are already of the size with regional divisions to accomodate worldwide products, however they do poorly in pretty much every regard.

Its no surprise people are complaining. This is a pretty major oversight.

Im not surprised though. Microsofts live services have been totally US focussed for years and the reveal of the Xbox one just reinforced that.

Let's stay on topic guys.   MS isn't the only US based company that targets the US first and leaves most of the rest of the world out with it's services.  I don't get Netflix, I don't get Hulu,  I don't get lots of web services.  Hell my country just got Spotify last month ffs.   All we can do is wait for them to expand to our market.    Let's not single out one company like they're the only ones doing it, lots are. 

 

The difference is that Netflix and Hulu don't pretend to offer their services or don't offer partially supported services in Greece.  MS, on the other hand, are selling the Xbox One in the EU and other regions that only support 50Hz and they're selling it at full price despite the fact that it doesn't work properly.  Unfortunately Microsoft have proven time and time again that they're unable to manage TV outside the US and if WMC is anything to go by the Xbox is never going to work properly. 

Bit different, those are either much smaller companies or are us specific cable providers. Microsoft are already of the size with regional divisions to accomodate worldwide products, however they do poorly in pretty much every regard.

Its no surprise people are complaining. This is a pretty major oversight.

Im not surprised though. Microsofts live services have been totally US focussed for years and the reveal of the Xbox one just reinforced that.

Netflix is not a small company though.

Also, lets not forget Google and Apple. Large companies too and they both have problems offering all media services to all regions.

The reality is that its is quite difficult to offer a single device that conforms to each and every tv standard while also fully supporting the cable boxes that are used in different regions. MS stated as much before launch, and yet some people would ignore that, as if MS made this pledge of 100% support in all regions day one. They pledged to roll out European TV support post launch, basically as soon as they could. Right now, the only pledged support has been for the US since they had time to complete building in support.

Regardless, I hope anyone effected by this is actually reaching out to MS directly to make sure they know the extent of the issue. It would be interesting to hear what responses you guys get. As I told SnoopZ, give MS a call, get on a live chat, and post on their official twitter support page. That will get their attention and hopefully result in a positive response for those affected.

The difference is that Netflix and Hulu don't pretend to offer their services or don't offer partially supported services in Greece.  MS, on the other hand, are selling the Xbox One in the EU and other regions that only support 50Hz and they're selling it at full price despite the fact that it doesn't work properly.  Unfortunately Microsoft have proven time and time again that they're unable to manage TV outside the US and if WMC is anything to go by the Xbox is never going to work properly.

And again, MS made no secret about the fact that proper UK/European TV support would be coming later, post launch.

  • Like 2

Did you get a chance to check if the X1 is properly showing the make and model of your tv, receiver, and cable box in its settings?

I will have to check that tomorrow, not sure where to look, how would it know what cable box I have as I never had to tell it?

So from reading some more comments on the issue elsewhere, its strange that all of those comments are about the 'judder' affect that SnoopZ brought up. No one has mentioned the constant freezing issue.

Could it be that the judder issue can be overcome by simply disabling the 'film' detection feature on whatever model hdtv you happen to own?

That doesn't solve the freezing issue talked about here, but it takes care of one issue.

It sounds like this can be overcome with a software patch. The X1 is already capable of switching refresh rates on the fly for certain apps. The bluray player can be set to run at 24hz. When this is on, bluray playback is 24hz at full screen and the display output switches to 60hz when using the snap function or switching to another app.

So all MS will need to do is allow 50hz as an option to enable for the TV playback app. So while TV is at full screen, its pushing 50hz and if you snap something or switch out, it changes to 60hz.

This is my reasoning why I think my TV is OK, the signal comes out of my cable box at 50hz it then goes into the HDMI in on the X1 and from what I understand it must be getting converted to 60hz and then sent to the TV via the HDMI out. Now this is the same HDMI out that is used to play games on, so that would be 60hz to and I don't have an issue with any freezing or stuttering with that.

So surely that must rule out the TV?

 

It's not your TV, it's the 50Hz video output from the channel / TV box you are viewing. You could reproduce the same result with any HDMI display that supports Picture In Picture, one source 60Hz and the other 50Hz.

Different TV modes will try to compensate for it and will likely make it worse or even cause the processing program to fail.

 

I used to have the same type of problem using PiP or Side by Side with a PS2 (50Hz), PC (60Hz) and Dell UltraSharp 20" display (60Hz). I currently have the same issue if I view my Yamaha's setup menu during HDMI pass through on-screen as I have a 50Hz menu overlay over a 60Hz HDMI signal (One hell of a headache).

 

If Microsoft can fix that via a software update & keep the same feature set, I will be quite impressed.

just to make it clear, the problem is not the tv. Its the fact that his cable box outputs 50hz, and Xbox one outputs 60hz. Any modern tv should support 50hz and 60hz. But since the Xbox is taking a 50hz and outputting 60hz, some type of frame rate conversion is either happening,which leads to judder, or my theory is that no framerate conversion is actually happening yet,so the 50hz signal is being dumped straight to the set,which leads to a repeat of the last frame at 10x,which is why the picture looks like it froze. Microsoft has said support for tv services is coming to different regions down the road,I don't think its fair to criticize this feature if it is broken for those users.

 

anyways with bluray there is a 24hz mode that will let your tv handle this signal natively,and if your tv can do 24hz you will get a judder free picture with no 3:2 pulldown required. If you turn the option off,Xbox will do the pulldown and output it at 60hz. It may be that for EU users could be able to choose for the Xbox do frame rate conversion of 50hz to 60hz(may be noticeable judder) when used in snap view,and when full screen it will set the tv mode to 50hz(tv may blank for a second when switching modes), just like it does if you set the bluray 24hz option on. Another option they may give is to run the UI and tv at 50hz, and when switching to a game tv will switch over to 60hz.

  • Like 2

And again, MS made no secret about the fact that proper UK/European TV support would be coming later, post launch.

 

Well, they were up front about the fact that they wouldn't offer guide support at launch but they should have disabled HDMI pass through altogether if they couldn't get it to work.  They should probably have discounted the Xbox at launch if they couldn't get it to do everything it is meant to do. Why is the rest of the world paying for missing functionality?

 

As for proper UK/European TV support - I don't think we'll ever get that.  For instance, here in the UK many/most people watch free to air TV using the tuner in their TV rather than a set top box.  AFAIK the Xbox will never support that.  I also doubt that MS will offer full support for all the different cable operators here in Europe at any point (although I'd be happy to be proven wrong).

So, when playing a blu-ray... are we going to see a 3:2 pull-down issue and extra judder too? :/

There is an option in the settings to enable 24hz while playing blurays in full screen.

 

 

I will have to check that tomorrow, not sure where to look.

Alright. I'm not sure if this will help at all, but I think it would be helpful to verify that things are being seen properly.

for reference, choose the 'Settings' tile and then:

1. Choose 'TV & One Guide'

2. Choose 'Devices'

3. Here you should see your devices listed with the right model numbers. If they are not correct, then try to set them up and choose the correct models

Also, after you have checked that, back out of 'Devices' and choose 'Troubleshooting'. In here, you should see the first option is 'HDMI'. Your device should be listed. If it is, then choose it and it will troubleshoot your display, perhaps offering some fix.

Well, they were up front about the fact that they wouldn't offer guide support at launch but they should have disabled HDMI pass through altogether if they couldn't get it to work.  They should probably have discounted the Xbox at launch if they couldn't get it to do everything it is meant to do. Why is the rest of the world paying for missing functionality?

 

As for proper UK/European TV support - I don't think we'll ever get that.  For instance, here in the UK many/most people watch free to air TV using the tuner in their TV rather than a set top box.  AFAIK the Xbox will never support that.  I also doubt that MS will offer full support for all the different cable operators here in Europe at any point (although I'd be happy to be proven wrong).

Look, both console launched with missing features. For MS in particular, they have said plainly that they intend to bring full support post launch. I'm not sure how much more plain they could have been on that.

MS even went as far as to specifically say that OTA was also going to be a supported option for TV viewing. I'm not claiming this will happen or that its possible, I'm just sharing what MS has said. Its on their site for all to see.

I have no idea if the current issue is part of that delayed support roll out, or if its a bug that was not meant to present at launch. All I know is that MS claims to be working on rolling out the tv features as quickly as they can. This issue needs to be told directly to MS by those affected.

the zune was a product that no one wanted or needed though parts of it's legacy lives in windows phone. You europeans will still trip over yourselves to get the Xbox One. You've delt with the 50hz problem on games going back to at least the 80s and you're still dealing with it now. Maybe it would do you good to get a 60hz  tv as your gaming TV.

 

no the 50hz "problem" has nothing to do with the games and this doesn't affect gaming. games will work in 60hz on our TV's. seriously READ THE THREAD! 

I call this an out cry and considering everyone i know in the UK with an X1 has the same issue.

 

http://www.hdtvtest.co.uk/news/xbox-50hz-201311233468.htm

 

When it freezes does only the TV picture freeze or does everything from the xbox freeze ? can you open the xbox menu ? if you have something snapped with the tv picture does it freeze to or just the tv picture ? 

This is my reasoning why I think my TV is OK, the signal comes out of my cable box at 50hz it then goes into the HDMI in on the X1 and from what I understand it must be getting converted to 60hz and then sent to the TV via the HDMI out. Now this is the same HDMI out that is used to play games on, so that would be 60hz to and I don't have an issue with any freezing or stuttering with that.

So surely that must rule out the TV?

 

Actually the HDMI cable I suspected of being bad was the one between your tuner and the xbox, not xbox and tv. 

Look, both console launched with missing features. For MS in particular, they have said plainly that they intend to bring full support post launch. I'm not sure how much more plain they could have been on that.

MS even went as far as to specifically say that OTA was also going to be a supported option for TV viewing. I'm not claiming this will happen or that its possible, I'm just sharing what MS has said. Its on their site for all to see.

I have no idea if the current issue is part of that delayed support roll out, or if its a bug that was not meant to present at launch. All I know is that MS claims to be working on rolling out the tv features as quickly as they can. This issue needs to be told directly to MS by those affected.

 

The problem is that most people are not going to any site to read if a feature most people don't understand works or not. If you are going to rush out a console then maybe it would have been better to remove that feature for those countries affected so you then don't get the negative press for a half assed implementation.

The problem is that most people are not going to any site to read if a feature most people don't understand works or not. If you are going to rush out a console then maybe it would have been better to remove that feature for those countries affected so you then don't get the negative press for a half assed implementation.

Wouldn't those same people be upset to find out that the hdmi-in port on their X1 was disabled all together? As you said, they wouldn't go and read MS' announcement anyway. Lets remember, the issue is only tied to live TV, there is nothing stopping people in Europe from using the function with other devices. So it still has some utility even while this bug is present.

But again, I have no idea if the lack of 50hz support is a bug or if its part of the delayed support that MS spoke about.

If it is a bug, then MS may be working on a fix. Either way, I hope people are not just talking on forums but are actually contacting MS. I want to hear what their response is once so many users contact them. It should light a fire under them.

Did you get a chance to check if the X1 is properly showing the make and model of your tv, receiver, and cable box in its settings?

The TV is set correctly, and this morning it is freezing all the time making it unwatchable through the X1.

When it freezes does only the TV picture freeze or does everything from the xbox freeze ? can you open the xbox menu ? if you have something snapped with the tv picture does it freeze to or just the tv picture ? 

The X1 doesn't freeze at all i can still move around the guide.

Wouldn't those same people be upset to find out that the hdmi-in port on their X1 was disabled all together? As you said, they wouldn't go and read MS' announcement anyway. Lets remember, the issue is only tied to live TV, there is nothing stopping people in Europe from using the function with other devices. So it still has some utility even while this bug is present.

But again, I have no idea if the lack of 50hz support is a bug or if its part of the delayed support that MS spoke about.

If it is a bug, then MS may be working on a fix. Either way, I hope people are not just talking on forums but are actually contacting MS. I want to hear what their response is once so many users contact them. It should light a fire under them.

 

It's not easy, actually verging on downright impossible to patch this. All the games/UI would have to be reprogrammed to 50hz.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No, size is not the only selling point. I did not even remotely say that. Your claim was that "building your own will be faster and cheaper". This is false. You cannot build something close to that form factor with off-the-shelf parts. You can build a Mini-ITX PC and pay more, or something larger and pay less. But these are different market segments. It's apples and oranges.
    • There is a default resolution setting in Settings > Display that can be changed with a click. You can also change the settings on a per-game basis. No CLI needed. Also, Steam has countless games that are not "[perpetual] alpha/beta games", so no need for the straw man. Plus you can use other stores as well. And console games (e.g. PS5) cost a fortune, which itself more than negates the price subsidy on the system, unless you plan on exclusively playing 1 or 2 games. It's true that you shouldn't buy a system that doesn't support the game(s) you want to play, but I think that's kinda obvious, and applies to every console as well as PC. I don't game in the living room and have no need of a Steam Machine, but there is a clear market segment that would find it useful.
    • RSS Guard 5.2.0 by Razvan Serea RSS Guard is a simple (yet powerful) feed reader. It is able to fetch the most known feed formats, including RSS/RDF and ATOM. It's free, it's open-source. RSS Guard currently supports Czech, Dutch, English, French, German, Italian. RSS Guard will never depend on other services - this includes online news aggregators like Feedly, The Old Reader and others. RSS Guard is developed on top of the Qt library and it supports these operating systems: Windows GNU/Linux OS/2 (eComStation) Mac OS X xBSD (possibly) Android (possibly) other platforms supported by Qt The core features of RSS Guard are: support for online feed synchronization via plugins, Tiny Tiny RSS (from RSS Guard 3.0.0). multiplatform, support for all feed formats, simplicity, import/export of feeds to/from OPML 2.0, downloader with own tab and support for up to 6 parallel downloads, message filter with regular expressions, feed metadata fetching including icons, simple Adblock functionality, customized popup notifications, Google-based auto-completion for internal web browser location bar, ability to cleanup internal message database with various options, enhanced feed auto-updating with separate time intervals, multiple data backend support, SQLite (in-memory DBs too), MySQL. is able to specify target database by its name (MySQL backend), “portable” mode support with clever auto-detection, feed categorization, drap-n-drop for feed list, automatic checking for updates, ability to discover existing feeds on websites, full support of podcasts (both RSS & ATOM), ability to backup/restore database or settings, fully-featured recycle bin, printing of messages and any web pages, can be fully controlled via keyboard, feed authentication (Digest-MD5, BASIC, NTLM-2), handles tons of messages & feeds, sweet look & feel, fully adjustable toolbars (changeable buttons and style), ability to check for updates on all platforms + self-updating on Windows, hideable main menu, toolbars and list headers, KFeanza-based default icon theme + ability to create your own icon themes, fully skinnable user interface + ability to create your own skins, “newspaper” view, plenty of skins, support for "feed://" URI scheme, ability to hide list of feeds/categories, open-source development model based on GNU GPL license, version 3, tabbed interface, integrated web browser with adjustable behavior + external browser support, internal web browser mouse gestures support, desktop integration via tray icon, localizations to some languages, Qt library is the only dependency, open-source development model and friendly author waiting for your feedback, no ads, no hidden costs. RSS Guard 5.2.0 changelog: Added: Feed auto-fetch can now also be delayed while Feral GameMode is active on Linux and startup auto-fetch is skipped when GameMode is already active. (#2265) WebEngine builds can now use RSS Guard generated proxy auto-config (PAC) rules so article/web browsing follows per-account and per-feed proxy settings more closely. (#2273) Generated PAC rules now also cover related subdomains and use Public Suffix List data, so feeds such as feeds.bbc.co.uk can also proxy resources from images.bbc.co.uk. (#2273) Standard feeds can now define extra proxy domains, useful when article images, stylesheets or other page resources are loaded from a CDN or another domain that should use the same feed proxy. (#2273) RSS Guard now asks for proxy credentials when a WebEngine page needs proxy authentication and can fill credentials from the current feed proxy when available. (#2273) Network settings again include an option to ignore all cookies, which clears stored cookies and prevents new cookies from being accepted. Standard RSS/ATOM feeds can now individually ignore cookies while downloading feed data. Stored cookies can now be deleted from the Tools menu. Custom skin colors can now override the feed list article count color separately from feed titles, including a separate highlighted color. (#2275) Settings dialog can now search across available settings and highlight matching controls. (#1754) Standard RSS/ATOM feeds can now optionally be reported as broken when they are valid but contain no articles. (#2039) Standard RSS/ATOM feeds can now override the application-wide feed connection timeout per feed. (#1023) Tray icon can now use a custom background color and unread-count text color, with an option to reuse the generated icon as the application icon. (#1973) Support for more benevolent parsing of Gemlog entries (#2295). Article list can now show when an article was received by RSS Guard. (#947) Feed deep discovery now actually scrapes all links found in the website and checks if they are feeds or not. This greatly enhances usability of the deep discovery mode and discovers many more feeds than before. (#2306) Search boxes now show a small dot when the feed or article list is hiding some items because of active filtering. (#873) Articles now have a shortcut-assignable action to open the homepage of the feed they belong to. (#2060) Fixed: Parallel feed updates no longer crash when multiple update results are processed at the same time. (64cf521) Links in WebEngine articles opened from feeds such as Kill the Newsletter now open correctly instead of being swallowed by the embedded page. (#2272) Relative article URLs resolution was kinda broken. (#2282) Clicking article URL did not work when the URL had "fragment" set. (#2293) The default proxy setting now uses Qt/system default proxy behavior instead of forcing no proxy. (e0263ad) WebEngine article loading now keeps the current feed context, so feed-specific proxy credentials remain available while the article page loads. (fdd0f00) Download: RSS Guard 5.2.0 (64-bit) | Portable | ~ 130.0 MB (Open Source) Link: RSS Guard Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is gonna separate the creeps from the rest of the crowd.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!