Xbox One 50Hz TV signal judder explained


Recommended Posts

We've got 3 LCD TVs, two are large ('expensive') TVs with loads of inputs, neither work with a 360 AT ALL using the HDMI port on any setting, the TVs claim to be HD - they are not.

On the other hand, the other is a small cheap tesco TV, works FINE with the 360 using HDMI.

 

There's game creators in the UK, they'll most probably have been using PAL development systems, if they were having problems I think they'd have notified MS, and I've heard no huge outcries about it in the media so I'm still sticking with the problem being your TV.

 

If you actually looked into the issue then you would know that the problem isn't EU TVs, they can handle 50 and 60Hz mode without a problem. The problem isn't the Xbox One as the TV handles the 60Hz input from the Xbox One just fine. The problem is the 50Hz input from EU STBs causing the console to have to create 10 frames per second out of nothing.

 

Games developers wouldn't hit this problem as they won't be watching TV on the development systems!!

Yes it went to the X1 dashboard when i turned it all on OR full screen TV i can't remember but the X1 was on fully as i have it set to turn off after 6hrs.

 

 

Yeah that makes me think the X1 is failing to resync with the cable box or the tv and causing the issue to show up.

 

Maybe you can do a test later to leave them off longer and see if it happens again.  Its even possible that it wont happen every time you turn them off for a few hours.

Yeah that makes me think the X1 is failing to resync with the cable box or the tv and causing the issue to show up.

 

Maybe you can do a test later to leave them off longer and see if it happens again.  Its even possible that it wont happen every time you turn them off for a few hours.

It is the evening here so i think another test will have to wait until tomorrow, if i remember i will do it while i am at work for 9hrs. :)

We know. It's called "interpolation" and isn't normally a problem with devices, but the Xbox One is just poor at it.

 

 

I'm starting to think its not that the X1 is poor at it, but that the X1 is not identifying the connections properly and that leads to the signal not being passed as it should be. The 'trick' posted earlier clearly demonstrates that the X1 is capable of passing through 50hz content without issue. 

 

Since there are sporadic claims of some UK users not seeing the issue at all, and even in this thread SnoopZ's issue comes and goes under some pretty specific circumstances.

 

Something tells me what MS will have to do is update the built in 'hdmi check list' with specific commands for the cable boxes affected and to do something about the X1 not resyncing properly with those boxes.

I'm starting to think its not that the X1 is poor at it, but that the X1 is not identifying the connections properly and that leads to the signal not being passed as it should be. The 'trick' posted earlier clearly demonstrates that the X1 is capable of passing through 50hz content without issue. 

 

Since there are sporadic claims of some UK users not seeing the issue at all, and even in this thread SnoopZ's issue comes and goes under some pretty specific circumstances.

 

Something tells me what MS will have to do is update the built in 'hdmi check list' with specific commands for the cable boxes affected and to do something about the X1 not resyncing properly with those boxes.

Well i left the X1 on fully through the night with the TV switched off and the cable box in standby mode, when i switched the TV and cable box back on in the morning everything worked fine, no freezing of the TV picture so this problem looks to be random.

Well i left the X1 on fully through the night with the TV switched off and the cable box in standby mode, when i switched the TV and cable box back on in the morning everything worked fine, no freezing of the TV picture so this problem looks to be random.

Ok, that is some useful info. MS is sending engineers to some user homes to see the problem in person, they should head out to your place as well :laugh:

Although yours is hard to replicate on command. I think this is an hdmi issue, not a 50hz incompatibility issue. There is just too much evidence pointing in that direction.

As i posted in the update thread, it is possible it has fixed my panning judder issue, as i have turned 'Auto Film 1' back on my TV and i don't seem to be seeing judder, however i need more good fast panning content to know for sure so it may take a few days.

As i posted in the update thread, it is possible it has fixed my panning judder issue, as i have turned 'Auto Film 1' back on my TV and i don't seem to be seeing judder, however i need more good fast panning content to know for sure so it may take a few days.

I really hope that is true, because it would be nice to know that MS got on that problem quickly.

Now I wonder if it has fixed the problem for the other UK users that have run into it.

I really hope that is true, because it would be nice to know that MS got on that problem quickly.

Now I wonder if it has fixed the problem for the other UK users that have run into it.

The juddering is still very apparent even on normal speak, so i turned off  film mode 'auto 1' on my TV and it is smooth again.

 

Hopefully they may fix this 1 day, i actually remember a similar issue with watching downloaded movies on the 360 years ago, not sure if that ever got fixed.

The juddering is still very apparent even on normal speak, so i turned off  film mode 'auto 1' on my TV and it is smooth again.

 

Hopefully they may fix this 1 day, i actually remember a similar issue with watching downloaded movies on the 360 years ago, not sure if that ever got fixed.

Ah ok, so too good to be true then. Oh well, that just means they are still working on it.

I tend to watch Sky News alot in the mornings when getting ready for work, and the evenings when getting ready for bed. Sky News as you know has that constantly scrolling news ticker along the bottom.

 

When I first got my Xbox One, there was noticeable judder to the ticker compared to previously when my Sky box was plugged directly into the TV. However I used the trick to force my Xbox One into 50 Hz mode which has resolved it for me and the ticker is now smooth again. This also doesn't seem to have had any noticeable impact on my games, as I've been paying DR3 and AC4 since with no issues.

 

So I can't see why they can't just lock European consoles to 50 Hz output like I have done. I don't see any downside.

I tend to watch Sky News alot in the mornings when getting ready for work, and the evenings when getting ready for bed. Sky News as you know has that constantly scrolling news ticker along the bottom.

 

When I first got my Xbox One, there was noticeable judder to the ticker compared to previously when my Sky box was plugged directly into the TV. However I used the trick to force my Xbox One into 50 Hz mode which has resolved it for me and the ticker is now smooth again. This also doesn't seem to have had any noticeable impact on my games, as I've been paying DR3 and AC4 since with no issues.

 

So I can't see why they can't just lock European consoles to 50 Hz output like I have done. I don't see any downside.

I thought that trick forced the console to output everything at 50hz though, including games?

If it does, then that isn't an answer long term for most people.

I tend to watch Sky News alot in the mornings when getting ready for work, and the evenings when getting ready for bed. Sky News as you know has that constantly scrolling news ticker along the bottom.

 

When I first got my Xbox One, there was noticeable judder to the ticker compared to previously when my Sky box was plugged directly into the TV. However I used the trick to force my Xbox One into 50 Hz mode which has resolved it for me and the ticker is now smooth again. This also doesn't seem to have had any noticeable impact on my games, as I've been paying DR3 and AC4 since with no issues.

 

So I can't see why they can't just lock European consoles to 50 Hz output like I have done. I don't see any downside.

I may try this sometime to see how it handles fast moving games like Forza. :)

I thought that trick forced the console to output everything at 50hz though, including games?

If it does, then that isn't an answer long term for most people.

 

As I said, this has no noticeable impact on games. Certainly nothing I could discern with the naked eye on the two games I own. As such I don't see why this couldn't be an "answer long term".

 

I doubt 99% of humans could tell the difference between 50fps and 60fps with the naked eye.

As I said, this has no noticeable impact on games. Certainly nothing I could discern with the naked eye on the two games I own. As such I don't see why this couldn't be an "answer long term".

 

I doubt 99% of humans could tell the difference between 50fps and 60fps with the naked eye.

You could be right, but I know at least some people would be upset knowing that it was not outputting games at 60fps, even if they couldn't see the difference.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No, size is not the only selling point. I did not even remotely say that. Your claim was that "building your own will be faster and cheaper". This is false. You cannot build something close to that form factor with off-the-shelf parts. You can build a Mini-ITX PC and pay more, or something larger and pay less. But these are different market segments. It's apples and oranges.
    • There is a default resolution setting in Settings > Display that can be changed with a click. You can also change the settings on a per-game basis. No CLI needed. Also, Steam has countless games that are not "[perpetual] alpha/beta games", so no need for the straw man. Plus you can use other stores as well. And console games (e.g. PS5) cost a fortune, which itself more than negates the price subsidy on the system, unless you plan on exclusively playing 1 or 2 games. It's true that you shouldn't buy a system that doesn't support the game(s) you want to play, but I think that's kinda obvious, and applies to every console as well as PC. I don't game in the living room and have no need of a Steam Machine, but there is a clear market segment that would find it useful.
    • RSS Guard 5.2.0 by Razvan Serea RSS Guard is a simple (yet powerful) feed reader. It is able to fetch the most known feed formats, including RSS/RDF and ATOM. It's free, it's open-source. RSS Guard currently supports Czech, Dutch, English, French, German, Italian. RSS Guard will never depend on other services - this includes online news aggregators like Feedly, The Old Reader and others. RSS Guard is developed on top of the Qt library and it supports these operating systems: Windows GNU/Linux OS/2 (eComStation) Mac OS X xBSD (possibly) Android (possibly) other platforms supported by Qt The core features of RSS Guard are: support for online feed synchronization via plugins, Tiny Tiny RSS (from RSS Guard 3.0.0). multiplatform, support for all feed formats, simplicity, import/export of feeds to/from OPML 2.0, downloader with own tab and support for up to 6 parallel downloads, message filter with regular expressions, feed metadata fetching including icons, simple Adblock functionality, customized popup notifications, Google-based auto-completion for internal web browser location bar, ability to cleanup internal message database with various options, enhanced feed auto-updating with separate time intervals, multiple data backend support, SQLite (in-memory DBs too), MySQL. is able to specify target database by its name (MySQL backend), “portable” mode support with clever auto-detection, feed categorization, drap-n-drop for feed list, automatic checking for updates, ability to discover existing feeds on websites, full support of podcasts (both RSS & ATOM), ability to backup/restore database or settings, fully-featured recycle bin, printing of messages and any web pages, can be fully controlled via keyboard, feed authentication (Digest-MD5, BASIC, NTLM-2), handles tons of messages & feeds, sweet look & feel, fully adjustable toolbars (changeable buttons and style), ability to check for updates on all platforms + self-updating on Windows, hideable main menu, toolbars and list headers, KFeanza-based default icon theme + ability to create your own icon themes, fully skinnable user interface + ability to create your own skins, “newspaper” view, plenty of skins, support for "feed://" URI scheme, ability to hide list of feeds/categories, open-source development model based on GNU GPL license, version 3, tabbed interface, integrated web browser with adjustable behavior + external browser support, internal web browser mouse gestures support, desktop integration via tray icon, localizations to some languages, Qt library is the only dependency, open-source development model and friendly author waiting for your feedback, no ads, no hidden costs. RSS Guard 5.2.0 changelog: Added: Feed auto-fetch can now also be delayed while Feral GameMode is active on Linux and startup auto-fetch is skipped when GameMode is already active. (#2265) WebEngine builds can now use RSS Guard generated proxy auto-config (PAC) rules so article/web browsing follows per-account and per-feed proxy settings more closely. (#2273) Generated PAC rules now also cover related subdomains and use Public Suffix List data, so feeds such as feeds.bbc.co.uk can also proxy resources from images.bbc.co.uk. (#2273) Standard feeds can now define extra proxy domains, useful when article images, stylesheets or other page resources are loaded from a CDN or another domain that should use the same feed proxy. (#2273) RSS Guard now asks for proxy credentials when a WebEngine page needs proxy authentication and can fill credentials from the current feed proxy when available. (#2273) Network settings again include an option to ignore all cookies, which clears stored cookies and prevents new cookies from being accepted. Standard RSS/ATOM feeds can now individually ignore cookies while downloading feed data. Stored cookies can now be deleted from the Tools menu. Custom skin colors can now override the feed list article count color separately from feed titles, including a separate highlighted color. (#2275) Settings dialog can now search across available settings and highlight matching controls. (#1754) Standard RSS/ATOM feeds can now optionally be reported as broken when they are valid but contain no articles. (#2039) Standard RSS/ATOM feeds can now override the application-wide feed connection timeout per feed. (#1023) Tray icon can now use a custom background color and unread-count text color, with an option to reuse the generated icon as the application icon. (#1973) Support for more benevolent parsing of Gemlog entries (#2295). Article list can now show when an article was received by RSS Guard. (#947) Feed deep discovery now actually scrapes all links found in the website and checks if they are feeds or not. This greatly enhances usability of the deep discovery mode and discovers many more feeds than before. (#2306) Search boxes now show a small dot when the feed or article list is hiding some items because of active filtering. (#873) Articles now have a shortcut-assignable action to open the homepage of the feed they belong to. (#2060) Fixed: Parallel feed updates no longer crash when multiple update results are processed at the same time. (64cf521) Links in WebEngine articles opened from feeds such as Kill the Newsletter now open correctly instead of being swallowed by the embedded page. (#2272) Relative article URLs resolution was kinda broken. (#2282) Clicking article URL did not work when the URL had "fragment" set. (#2293) The default proxy setting now uses Qt/system default proxy behavior instead of forcing no proxy. (e0263ad) WebEngine article loading now keeps the current feed context, so feed-specific proxy credentials remain available while the article page loads. (fdd0f00) Download: RSS Guard 5.2.0 (64-bit) | Portable | ~ 130.0 MB (Open Source) Link: RSS Guard Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is gonna separate the creeps from the rest of the crowd.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!