Xbox One 50Hz TV signal judder explained


Recommended Posts

We've got 3 LCD TVs, two are large ('expensive') TVs with loads of inputs, neither work with a 360 AT ALL using the HDMI port on any setting, the TVs claim to be HD - they are not.

On the other hand, the other is a small cheap tesco TV, works FINE with the 360 using HDMI.

 

There's game creators in the UK, they'll most probably have been using PAL development systems, if they were having problems I think they'd have notified MS, and I've heard no huge outcries about it in the media so I'm still sticking with the problem being your TV.

 

If you actually looked into the issue then you would know that the problem isn't EU TVs, they can handle 50 and 60Hz mode without a problem. The problem isn't the Xbox One as the TV handles the 60Hz input from the Xbox One just fine. The problem is the 50Hz input from EU STBs causing the console to have to create 10 frames per second out of nothing.

 

Games developers wouldn't hit this problem as they won't be watching TV on the development systems!!

Yes it went to the X1 dashboard when i turned it all on OR full screen TV i can't remember but the X1 was on fully as i have it set to turn off after 6hrs.

 

 

Yeah that makes me think the X1 is failing to resync with the cable box or the tv and causing the issue to show up.

 

Maybe you can do a test later to leave them off longer and see if it happens again.  Its even possible that it wont happen every time you turn them off for a few hours.

Yeah that makes me think the X1 is failing to resync with the cable box or the tv and causing the issue to show up.

 

Maybe you can do a test later to leave them off longer and see if it happens again.  Its even possible that it wont happen every time you turn them off for a few hours.

It is the evening here so i think another test will have to wait until tomorrow, if i remember i will do it while i am at work for 9hrs. :)

We know. It's called "interpolation" and isn't normally a problem with devices, but the Xbox One is just poor at it.

 

 

I'm starting to think its not that the X1 is poor at it, but that the X1 is not identifying the connections properly and that leads to the signal not being passed as it should be. The 'trick' posted earlier clearly demonstrates that the X1 is capable of passing through 50hz content without issue. 

 

Since there are sporadic claims of some UK users not seeing the issue at all, and even in this thread SnoopZ's issue comes and goes under some pretty specific circumstances.

 

Something tells me what MS will have to do is update the built in 'hdmi check list' with specific commands for the cable boxes affected and to do something about the X1 not resyncing properly with those boxes.

I'm starting to think its not that the X1 is poor at it, but that the X1 is not identifying the connections properly and that leads to the signal not being passed as it should be. The 'trick' posted earlier clearly demonstrates that the X1 is capable of passing through 50hz content without issue. 

 

Since there are sporadic claims of some UK users not seeing the issue at all, and even in this thread SnoopZ's issue comes and goes under some pretty specific circumstances.

 

Something tells me what MS will have to do is update the built in 'hdmi check list' with specific commands for the cable boxes affected and to do something about the X1 not resyncing properly with those boxes.

Well i left the X1 on fully through the night with the TV switched off and the cable box in standby mode, when i switched the TV and cable box back on in the morning everything worked fine, no freezing of the TV picture so this problem looks to be random.

Well i left the X1 on fully through the night with the TV switched off and the cable box in standby mode, when i switched the TV and cable box back on in the morning everything worked fine, no freezing of the TV picture so this problem looks to be random.

Ok, that is some useful info. MS is sending engineers to some user homes to see the problem in person, they should head out to your place as well :laugh:

Although yours is hard to replicate on command. I think this is an hdmi issue, not a 50hz incompatibility issue. There is just too much evidence pointing in that direction.

As i posted in the update thread, it is possible it has fixed my panning judder issue, as i have turned 'Auto Film 1' back on my TV and i don't seem to be seeing judder, however i need more good fast panning content to know for sure so it may take a few days.

As i posted in the update thread, it is possible it has fixed my panning judder issue, as i have turned 'Auto Film 1' back on my TV and i don't seem to be seeing judder, however i need more good fast panning content to know for sure so it may take a few days.

I really hope that is true, because it would be nice to know that MS got on that problem quickly.

Now I wonder if it has fixed the problem for the other UK users that have run into it.

I really hope that is true, because it would be nice to know that MS got on that problem quickly.

Now I wonder if it has fixed the problem for the other UK users that have run into it.

The juddering is still very apparent even on normal speak, so i turned off  film mode 'auto 1' on my TV and it is smooth again.

 

Hopefully they may fix this 1 day, i actually remember a similar issue with watching downloaded movies on the 360 years ago, not sure if that ever got fixed.

The juddering is still very apparent even on normal speak, so i turned off  film mode 'auto 1' on my TV and it is smooth again.

 

Hopefully they may fix this 1 day, i actually remember a similar issue with watching downloaded movies on the 360 years ago, not sure if that ever got fixed.

Ah ok, so too good to be true then. Oh well, that just means they are still working on it.

I tend to watch Sky News alot in the mornings when getting ready for work, and the evenings when getting ready for bed. Sky News as you know has that constantly scrolling news ticker along the bottom.

 

When I first got my Xbox One, there was noticeable judder to the ticker compared to previously when my Sky box was plugged directly into the TV. However I used the trick to force my Xbox One into 50 Hz mode which has resolved it for me and the ticker is now smooth again. This also doesn't seem to have had any noticeable impact on my games, as I've been paying DR3 and AC4 since with no issues.

 

So I can't see why they can't just lock European consoles to 50 Hz output like I have done. I don't see any downside.

I tend to watch Sky News alot in the mornings when getting ready for work, and the evenings when getting ready for bed. Sky News as you know has that constantly scrolling news ticker along the bottom.

 

When I first got my Xbox One, there was noticeable judder to the ticker compared to previously when my Sky box was plugged directly into the TV. However I used the trick to force my Xbox One into 50 Hz mode which has resolved it for me and the ticker is now smooth again. This also doesn't seem to have had any noticeable impact on my games, as I've been paying DR3 and AC4 since with no issues.

 

So I can't see why they can't just lock European consoles to 50 Hz output like I have done. I don't see any downside.

I thought that trick forced the console to output everything at 50hz though, including games?

If it does, then that isn't an answer long term for most people.

I tend to watch Sky News alot in the mornings when getting ready for work, and the evenings when getting ready for bed. Sky News as you know has that constantly scrolling news ticker along the bottom.

 

When I first got my Xbox One, there was noticeable judder to the ticker compared to previously when my Sky box was plugged directly into the TV. However I used the trick to force my Xbox One into 50 Hz mode which has resolved it for me and the ticker is now smooth again. This also doesn't seem to have had any noticeable impact on my games, as I've been paying DR3 and AC4 since with no issues.

 

So I can't see why they can't just lock European consoles to 50 Hz output like I have done. I don't see any downside.

I may try this sometime to see how it handles fast moving games like Forza. :)

I thought that trick forced the console to output everything at 50hz though, including games?

If it does, then that isn't an answer long term for most people.

 

As I said, this has no noticeable impact on games. Certainly nothing I could discern with the naked eye on the two games I own. As such I don't see why this couldn't be an "answer long term".

 

I doubt 99% of humans could tell the difference between 50fps and 60fps with the naked eye.

As I said, this has no noticeable impact on games. Certainly nothing I could discern with the naked eye on the two games I own. As such I don't see why this couldn't be an "answer long term".

 

I doubt 99% of humans could tell the difference between 50fps and 60fps with the naked eye.

You could be right, but I know at least some people would be upset knowing that it was not outputting games at 60fps, even if they couldn't see the difference.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!