Recommended Posts

Bullets do NOT produce smoke! The only smoke is from the exploding charge from the bullet CASING, and that either stays in the gun or is ejected onto the floor.  Bullet's themselves are just a lump of metal,  either solid or hollow, and no NO way to produce smoke at all.

 

You're either lying, or are <redacted so I don't get told off>

 

Bullets do produce smoke. I posted two victims, not jfk where smoke was present at the entry point. There's a clear smoke present at the front of his head in all three jfk films.

Since we're a tech forum, how do you feel about people who apparently create accounts here for no reason other than to copy/paste wackjob conspiracy theories in this thread?

 

Since we're on a tech forum, how do you feel about the fact that the driver shot jfk and you can't refute a single piece of evidence I've posted? The only wackjob theory is Oswald shooting jfk in the back of the head when he was clearly shot in the front of the head.

Bullets do produce smoke. I posted two victims, not jfk where smoke was present at the entry point. There's a clear smoke present at the front of his head in all three jfk films.

 

OK genius, explain from where a solid piece of metal produces smoke, and exactly by what mechanism it is able to do so.

JFK was killed by his own administration/government because of his opposition to the Vietnam War. And just a lot of other things. He supposedly said he wanted to dismantle the CIA. The KENNEDYS WERE HATED, BIG TIME.

http://www.globalresearch.ca/jfk-assassination-marked-the-end-of-the-american-republic/5346419

LS: What do you see as the prime motive(s) to get Kennedy killed?

MB: To make a long story, which I elaborate in the book, short: JFK had made definitive steps to end the cold war. He had denied the involvement of the army in the Bay of Pigs invasion, which he had inherited from his predecessor, he had solved the missile crisis in Cuba through direct and secret contact with the Soviet-leader Khrushchev, he had ensured a nuclear test-stop with the Soviets, and he had ordered the withdrawal from Vietnam. All this against the will of the military, the CIA, and even against many members of his own administration.

LS: If one looks at the crime from the perspective of ?motive, means, opportunity,? which groups are the most likely culprits? Some of the usual suspects may have had a motive, but neither the means nor the opportunity, right?

MB: Yes. This is a crucial point with many JFK theories. A lot of people had motives, be it the hardcore commies in Russia, China, Cuba, be it the Israelis because of JFKs dismissal of nukes in Israel, be it the Federal Reserve because of his idea for a new US dollar backed by silver, the mob because of his dismissal to invade Cuba to get their casinos and brothels back, the racist Southerners because of his engagement for civil rights? but no one of them had the means and opportunity for the murder and above all the means to cover it up over the years.

LS: Which party had the necessary components of ?means and opportunity? available?

MB: Only the CIA and the military ? and the FBI and the Johnson administration for the cover-up. A moment after the shootings, a policeman ran up to the grassy knoll, his gun pulled out, and stopped a man there, asking for his ID. The man showed a Secret Service card and the cop let him go. Several other men on Dealey Plaza also showed genuine looking Secret Service IDs when asked by cops ? but there were no real Secret Service men placed on the knoll and the plaza this day.

These IDs were fakes but the FBI and the Warren Commission didn?t investigate this at all. Only in the 80s it came out who was responsible for the printing of Secret Service IDs and passes at that time: it was the CIAs Technical Division, headed by Sydney Gottlieb of ?MK Ultra? fame. This fact alone rules out that the mob or the Russians, Cubans, Chinese or some other autonomous killers did this on their own bill. And even if these groups would have been able to fake genuine looking Secret Service IDs ? the fact that this deception was not investigated, immediately brings Hoover?s FBI into a top-position of suspects.

I can't explain why or how it happens, only that it does. Here is four minutes of steel targets producing smoke at point of impact.

 

That's not smoke. Smoke comes from fire. What you're seeing is the bullet disintegrating as a result of the impact with the steel, and the paint flying off of them.  

Hello,

It's all my work.

No, it isnt. You are simply searching sites and copying/pasting information. Nothing else.

 

others said it sounded like one. The bleached object he's passing is some kind of handgun. My guess is a 38 revolver

OK so "others" said it sounds like one. Did you hear the shot yourself, meaning you were at the scene?

  

Not spam when the person is actually on topic and just sharing their info. What did your last two posts add to the topic? Nothing but trollish comments honestly. Speak only for yourself. Not everyone is bored of the topic. Very annoying when one person tries to speak for all.

Neowin states this:

Spamming is characterized by the initiation of threads or posts that contribute nothing to a forum, be it off topic or on topic.

To the Neowin forum, it reallly contributes nothing.

 

It's just copy pasta from conspiracy sites. Spam. He's making no attempt to discuss the topic or explain his theories. It's just a wall of reconstituted meat.

Nicely put :)

 

 

That's totally false, as all three jfk films produced a clear smoke at the right front of his head, where the driver's bullet entered. Of course a person like myself (telling an obvious truth) will be censored.

You arent censored becuase you are or are not telling the truth. You are censored because the owner of this site determined that the pictures you are posting are too graphic.

My suggestion is to tone it down because this thread will get closed.

And like many others have said, bullets do not produce smoke. Do you even know what a bullet exactly is? If you think bullets produce smoke and/or do not know what a bullet is, you have no support on any of the theories, which makes the rest of your posts hard to believe.

Take a look at this video. Might make you find out what was actually smoke, isnt:

  • 10 months later...

http://www.amazon.com/We-Were-There-...r_pr_orig_subj

It's little pieces of truth like this that make the internet so awesome. It is only logical that many people would have been willing say they saw the driver shoot jfk. This is one of the most obvious facts exposing government evil that has been found thus far. Imagining a world with more truth thrashing such as this is much less a dream than ever before. It's a real possibility if the willingness can extend significantly outward. Somebody refers to a specific person and the front excludes the grassy snow job. Greer provided an ironic photo a billion times over if the image was taken after the assassination?

In the Introduction, on page xiii, the author writes: "Late in this project, I came upon a startling revelation in Dr. Ron Jones's oral history. After taking his Warren Commission deposition at Parkland, chief counsel Arlen Specter told Ronald Coy Jones, https://www.google.com/search?q=rona...0QsAQ#imgdii=_

"We have people who would testify that they saw somebody shoot the president from the front. But we don't want to interview them, and I don't want you to say anything about that, either."

Nothing of value here December 28, 2013

By Alexander J. Marciniszyn

Format:Hardcover

In the Introduction, on page xiii, the author writes: "Late in this project, I came upon a startling revelation in Dr. Ron Jones's oral history. After taking his Warren Commission deposition at Parkland, chief counsel Arlen Specter told Jones, 'We have people who would testify that they saw somebody shoot the president from the front. But we don't want to interview them, and I don't want you to say anything about that, either.'" Not much of a revelation to anyone who's studied the Kennedy assassination in depth. This author just throws up his hands in a "what is history and what is real or not?" kind of way at the end.

Get a copy of Trauma Room One by Dr. Charles Crenshaw. Steer clear of this one.

BillGreer.jpg

The driver shot jfk with a handgun, likely a 38 revolver fired from 6-8 feet in front of the President. The violent thrashing backwards was caused by the close range shot. That is McClelland's drawing of the exit wound.

John F. Kennedy Assassination Homepage :: Warren Commission :: Hearings :: Volume VI :: Page 38

This interview leaves no doubt about the right rear being blasted out and Greer's close range shot with a high velocity handgun. This silly interviewer quickly changes the subject after cerebellum falling out is brought to light.

Dr. Mcclelland. I think even then you could make the statement that this wound could have resulted from this type bullet fired through this particular mass of soft tissue, losing that much velocity before it exited from the body. Where you would expect to see this really great hole that is left behind would be, for instance, from a very high velocity missile fired at close range with a heavy caliber bullet, such as a .45 pistol fired at close range, which would make a small entrance hole, relatively, and particularly if it entered some portion of the anatomy such as the head, where there was a sudden change in density from the brain to the skull cavity, as it entered. As it left the body, it would still have a great deal of force behind it and would blow up a large segment of tissue as it exited.

But I don't think the bullet of this nature fired from that distance and going through this large area of homogenous soft tissue would necessarily make the usual kind of exit wound like I just described, with a close range high velocity heavy caliber bullet. This is why it would be difficult to say with certainty as has been implied in some newspaper articles that quoted me, that you could tell for sure that this was an entrance or an exit wound. I think this was blown up a good deal.

Testimony Of Dr. Robert Nelson Mcclelland

THE EXIT WOUND EXTENDED TO THE BOTTOM OF THE OCCIPITAL BONE. The force of the bullet pushed up the top of the head, but the bullet exited the right rear, as has been factual for many decades. That is McCLELLAND'S drawing of the rear blow-out. https://www.google.com/search?q=dr+m...w=1536&bih=748

Mr. SPECTER - Before proceeding to describe what you did in connection with the tracheostomy, will you more fully describe your observation with respect to the head wound?

Dr. McCLELLAND - As I took the position at the head of the table that I have already described, to help out with the tracheotomy, I was in such a position that I could very closely examine the head wound, and I noted that the right posterior portion of the skull had been extremely blasted. It had been shattered, apparently, by the force of the shot so that the parietal bone was protruded up through the scalp and seemed to be fractured almost along its right posterior half, as well as some of the occipital bone being fractured in its lateral haft, and this sprung open the bones that I mentioned in such a way that you could actually look down into the skull cavity itself and see that probably a third or so, at least, of the brain tissue, posterior cerebral tissue and some of the cerebellar tissue had been blasted out. There was a large amount of bleeding which was occurring mainly from the large venous channels in the skull which had been blasted open.

https://www.youtube.com/watch?v=6Q1lYifmUXA

WallPaint199.jpg
WallPaint566.jpg
greerhanky_zps7438d6a6.jpg~original

This topic is now closed to further replies.
  • Posts

    • First exciting thing to come to Windows in a long time ! This is the kind of things they should focus on, instead of cramming as much AI as they can in everything.
    • New AMD graphics driver fixes install issues and FSR 4.1 crashes on RX 7000 GPUs by Taras Buria AMD is rolling out yet another graphics driver. Version 26.6.4 is now available for download, bringing two important fixes. One is for those still using Windows 10 and having trouble installing driver 26.6.2. In fact, this patch is coming from the recently released hotfix, so it is not new if you are already running version 26.6.3. The second fix is for RX 7000 owners. AMD recently brought FSR 4.1 support to the previous-gen graphics cards, but there was a bug with certain games crashing when using FSR 4.1. I experienced this issue with Forza Horizon 6, so today's driver should take care of that. Here is the official changelog: Intermittent install issue seen when installing AMD Software: Adrenalin Edition 26.6.2 on Windows® 10 systems for Radeon™ RX 7000 series and above graphics products. Intermittent application crash may be observed in some games with AMD FSR Upscaling 4.1 enabled on Radeon™ RX 7000 series graphics products. Known issues include the following: Intermittent application crash or driver timeout may be observed while playing Battlefield™ 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield™ 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield™ 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. You can download the AMD Radeon driver 26.6.4 from the official website here. Full release notes are available on the same page.
    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
    • Samsung introduces new AI classroom tools and interactive displays at ISTELive 2026 by Fiza Ali Samsung has announced several new education-focused software features and interactive displays for schools during ISTELive 2026, taking place in Orlando, Florida, from 28 June to 1 July. The focus of these updates is on making shared classroom displays easier to use for teachers while giving IT administrators more control over managing devices. One of the key additions is the Samsung Account Management Solution (AMS). In many schools, multiple teachers share the same interactive display throughout the day, which means signing in and setting everything up can become repetitive. With AMS, teachers can log in by scanning a QR code or tapping an NFC-enabled ID card. Once signed in, their personalised workspace, including wallpapers, bookmarks, app shortcuts, and files, can be instantly accessed through Home Personalisation. Samsung has also included a screen lock feature, allowing teachers to lock the display if they need to step away briefly. Furthermore, the company is also updating its Education Portal with new tools designed for school IT administrators. The portal will allow IT administrators to register teachers, enrol devices, and manage user access from a central dashboard. Administrators can also link NFC cards to teacher accounts, making sign-ins quicker across shared displays. Another addition is a Tags feature that lets schools organise displays by building or classroom. Those tags can also be used to send emergency notifications to selected Samsung Interactive Displays through compatible platforms such as InformaCast and Raptor. Moreover, the tech giant's AI Assistant is gaining several new features aimed at supporting everyday classroom tasks such as lesson planning and classroom engagement. One of the features is Circle to Search, which lets teachers circle text or images on the display to quickly find related information, videos, or web results without interrupting the lesson. The content can then be brought into Samsung Whiteboard. Another feature, Live Transcript, converts spoken lessons into real-time captions, which could be useful for students with hearing impairments or those in multilingual classrooms. The AI Assistant also introduces AI Summary and AI Quiz. The summary tool creates summaries of recorded lessons, while AI Quiz generates questions based on lesson content so teachers can quickly check how well students are following along. Teachers signed in through Samsung AMS can also return to their previous AI-generated lesson materials without logging in again. Alongside the software updates, Samsung has expanded its Android-based Interactive Display range with three new models: the WAF-S, WAFX-PS, and WAHX-M. The WAF-S and WAFX-PS ship with Android 16, bringing updates to security, accessibility, and overall usability while maintaining compatibility with Google's education services including Google Classroom and Google Drive through EDLA certification. Meanwhile, the new WAHX-M is the biggest addition to the lineup, introducing a 98-inch display for larger spaces such as lecture halls and conference rooms. It will also be available in 65-inch, 75-inch and 86-inch sizes. Samsung says the WAHX-M further includes on-device AI features such as voice commands, text-to-speech, and an AI calculator, alongside support for Samsung AMS and AI Assistant. Samsung AI Assistant has been available since April, while Samsung AMS and the updated Education Portal will begin rolling out in July.
    • It's been $24 (single) or $89 (4-pack) for many days on both Amazon and Walmart as far as I know. That isn't a big discount. If these end up like the 1st gen, the 4-pack will routinely get down around $80, give or take a dollar. I think they have even hit $69 at times.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      97
    5. 5
      macoman
      63
  • Tell a friend

    Love Neowin? Tell a friend!