Recommended Posts

i have a weird network issue wherein my two network adapters get both an address via DHCP and also a Link Local IP address. (see screenshot). the two adapters are connected to two different networks with different dhcp servers. i have a feeling that this is a remnant from creating a bridge connections between the two adapters. this is an issue as in certain software that checks the IP address it detects and uses the link local ip address.

 

post-42710-0-99103300-1407170650.png

 

i have tried resetting network settings, resetting winsock. uninstalling the network adapter and adding it again but the problem seems to persists. i wanted to know if anyone has any clue on removing this link local address. it seems to only occur on the two network cards that i had created a bridge on earlier and deleted it.

 

any help is greatly appreciated 

 

do you have anything configured in your alternate configuration tab in the ipv4 properties within that adapter?

 

I believe this outlines your issue.  The default is automatic private ip address

http://www.eightforums.com/tutorials/29241-ip-address-enable-alternate-configuration.html

Another possible cause is that there is another computer with that ip address on the network.  If that is the case, you will need to change the static ip of that computer or reserve that ip in your dhcp for that other computer. 

I recall someone else having this issue awhile back and don't recall the exact cause - but this seems like a repeated problem. Hopefully the details will come to me here in a bit.

So what is this nic, its not dual port? is this the built in nic?

Arrggh its going to drive me nuts until I recall this previous thread now ;)

@sc302 the DHCP ip address 192.168.104.81 is reserved for the computer on the DHCP server so there is no conflict as far as i can tell. 

 

@budman the computer is laptop (Dell Precision M4700). one network is the built intel 82xx and the other one is via a USB3 to gigabit ethernet adapter (TRENDNet TU3-ETG). the issue is on both these cards. these were the two cards i tried to set the bridge on which i later deleted. 

 

could it be an issue related to how long windows waits before detecting wether DHCP server is present on the network. whats funny though is that the DHCP ip address shows up first and after a few mins the private IP also shows up. 

So I found the thread I was thinking about

https://www.neowin.net/forum/topic/1163160-each-nic-has-2-ip-addresses-cannot-work-out-why/

His was a VM.. He never came back to the thread - so not sure what happened with this.

You could try reset of your stack.. I have never ran into this before that last thread I linked too, have never seen it - so not exactly sure what could be causing your problem. I doubt it has anything to do with the attempted bridge. Did you actually remove the bridge?

http://support.microsoft.com/kb/299357

if you go to ipv4 properties, advanced do you see anything under IPs?

example

post-14624-0-77841400-1407185113.png

I've had that happen to a couple client machines. Reset the network stack, removed all network adapters and reinstalled them with new drivers. No static IP, the DHCP server was giving out the correct address. Still the problem would persist. Unfortunately the fastest thing for me to do was reimage the machine. Hopefully you won't have to resort to that.

If your ok with it - wouldn't mind setting up a Team viewer session to look into this a bit more.

Did you read the other thread about deleting the reg key for the guid that has that other IP On it?

Can you post the output of your ipconfig /all and also this section in device manager - making sure you set show hidden.

post-14624-0-88011900-1407196710.png

another area to look would be:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\

 

 

here are a few other things to try, there are a few in this thread:

http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

 

 

apparently there are a lot of causes and not one silver bullet to fix it.  you are going to have to try different things until you find the fix for you. 

I would take budman up on doing a teamviewer session...I wouldn't mind doing it either. 

Attached is the output from ipconfig/all 

 

i added the IPAutoConfigurationEnabled to 0 on all the interfaces but it still shows up as autoconfiguration enabled in ipconfig output. i have attached the registry of the interfaces module also

post-42710-0-37437800-1407226595.png post-42710-0-55559100-1407226626.png

 

 

ipconfig.txtFetching info...   interfaces.txtFetching info...

which of those guid shows 169.x address if any - don't have the time to convert the hex ;) Also look in registry if bridge is still there?

Do you have bridge left in the registry - should be here

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Bridge and BridgeMP

post-14624-0-91121900-1407238269.png

Did you reset the stack with netsh?

you could try removing those reg entries - they are not there unless a bridge has been created. I would have to test if they should be removed when you remove the bridge.

searching for the ip address in the registry did not yield any hits. 

 

as suggested by sc302 deleting the address works but it comes back at next bootup. this might be decent temporary solution until i can get around to doing a clean install. 


post-42710-0-39465700-1407253169.png

i use the MS disable IPv6 utility to disable IPv6 http://support.microsoft.com/kb/929852

 

SVGigE filter driver is the driver for a SVS Vistek GigE  camera. this was installed prior to the problem showing up. just to try i have removed it and problem is still there.

I disable ipv6 in the registry with simple command

reg add hklm\system\currentcontrolset\services\tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 255

But I would then unbind the interface for sure as well.. Try unchecking that reboot to see if your apipa address is still there.

This topic is now closed to further replies.
  • Posts

    • AMD Ryzen 9600X 6-core AM5 CPU is just $185 and you get a free 512GB NVMe SSD too by Sayan Sen If you are on AMD's AM4 socket or older Intel and are looking to upgrade your processor, AMD has the Ryzen 9600X for just $185 (purchase link down below), plus you get a free NVMe SSD as well. The deal comes hot on the heels of Intel also offering the Core i5-14600K for as low as just $200, which includes a 240 mm AIO liquid cooler. Check that deal out in this article if you want to go Team Blue. The AMD Ryzen 9600X is based on the latest Zen 5 design and is the company's best chip to date. This desktop CPU has six cores and 12 threads; it competes with Intel's 12th Gen i7 for productivity performance, and is almost as good as the 14th Gen i7 for gaming. The SKU does not include a cooler and so you will need to buy one separately. The technical specifications of the Ryzen 5 9600X are given below: Architecture: Zen 5 Process Technology: TSMC 4nm FinFET manufacturing process Core Count: 6 cores Thread Count: 12 threads Base Clock Frequency: 3.9 GHz Max Boost Clock Frequency: 5.4 GHz Total Cache: 6 MB + 32 MB (L2 + L3) Thermal Design Power (TDP): 65W PCI Express Version: PCIe 5.0 28 lanes (usable: 24) Overclocking: Unlocked for overclocking TjMax: 95 C Platform Socket: AM5 Memory capacity support: max 192 GB DDR5 Memory Speed: 2x1R DDR5-5600, 2x2R DDR5-5600, 4x1R DDR5-3600, 4x2R DDR5-3600 Get it at the links below: AMD Ryzen 5 9600X (includes Radeon 2CU Integrated Graphics) - 100-100001405WOF: $184.99 (Shipped and Sold by Amazon US) | $189.99 (Shipped and Sold by Newegg US + free 512 GB NVMe SSD) This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Hello, The general things are to make sure you have all of the latest Windows Updates installed as well as various device drivers for the computer's hardware components (video card, storage devices, etc.), as these can make a difference.  It might be small differences, but they can add up.  Case in point:  I was reading a while back about how in Windows 11 when you right-click on an object in File Explorer to bring up the context menu, it first enables to 3-D acceleration… to display a menu with text and maybe some 2-D icons.  Such behavior slows down the display of the context menu slightly.  If (and/or when) this gets fixed in Windows 11, context menus in File Explorer will appear much snappier. A few things you can try, in no particular order: Try toggling the full screen view of File Explorer on and off by pressing the F11 key twice.  This fixes another (different) bug like the one I mentioned above with Windows.  I don't recall if it has been fixed yet. Open the File Explorer, and look at the Panes section.  Click on the Navigation Pane button, and uncheck all of the options you do not need, like Navigation Pane, Show all folders, Show This PC, Show Network and Show Libraries.  You can also deselect (uncheck) the Preview pane and Details pane. In the Layout section, change the viewing option to either List or Details. if you use the Quick Access section in the left pane of the File Explorer, unpin (remove) any mappings to network drives, plus anything else you do not need or regularly access.  If you do not use it at all, consider unpinning everything there. In the File Explorer, select File → Options to bring up the Folder Options dialog and make the following changes: On the General tab, set Open File Explorer to This PC and below it in the Privacy section, uncheck the various Show… options and click on the Clear button. On the View tab, check the Always show icons, never thumbnails and the Launch folder windows in a separate process options.  Also on the View tab, uncheck the Display file size information in folder tips, Display the full path in the title bar, Restore previous folder windows at logon, Show preview handlers in preview pane and all of the options in the Navigation pane section. On the Search tab, scroll down the the When searching non-indexed locations section, and uncheck all of the items. Go to Settings → Network & internet → Advanced network settings → Advanced sharing settings and select the Private networks section.  In there, set Network discovery to On, enable (check) Set up network connected devices automatically, and set File and printer sharing to On.  Do not make any changes to the Public networks or All networks sections. Go to Settings → Privacy & security → Searching Windows and in the Find my files section, select (check) the Classic option.   Under the Classic option, select the Customize search locations option.  The Indexing Options window will appear.  Click on the Modify button to show the Indexed Locations window.  Click on the Show all locations button.  In the Change selection locations section at the top, remove any entries that say ""This location is currently unavailable" in them. Go back to the Indexing Options window, and click on the Advanced button.  The Advanced Options window will appear.  On the Index Settings tab, click the Rebuild tab. Other things to consider:  If you upgraded from Windows 10 to Windows 11 and/or cloned your boot drive (from a HDD to a SSD or a SSD to another SSD), wiping it and performing a clean installation of Windows 11 may improve performance, as legacy settings from the older hardware will no longer be in place.  If you are still using a hard disk drive, upgrading to a solid state drive will provide a noticeable performance improvement to all operations that involve accessing the drive. You can also try using third-party replacements for the Start Menu (Start 11, StartAllBack, etc.) and/or Windows File Explorer (Directory Opus, Double Commander, Explorer++, Files, FAR, Free Commander, Midnight Commander, Q-Dir, Total Commander, XYplorer ,etc.) to see if those perform better for you than Windows stock versions.  I don't think changing the antivirus software would have any effect, but it is something you could try as well, just to see if it does make any difference. Regards, Aryeh Goretsky  
    • I think it's bloody great, old chap!
    • Not the deal that 2nd hand purchasers tend to look for - no.  It's cheaper than the sum of it's parts new - yes.  But people looking for 2nd hand, pre-built computers are rarely looking for what you are selling. Don't misunderstand; as an informed enthusiast I like that computer, and as an informed enthusiast I am often asked "My son wants a gaming PC and here's my budget" - in which case, as an informed enthusiast I would totally point them in this sort of direction.  But I am not the mass market, hence you may well have to wait longer for a sale. If you're looking for speed - then breaking it into parts is likely to pay off better on that front, as there will be more people who suit that market and their likelihood of buying 2nd hand is more fruitful.  But - chore!
  • Recent Achievements

    • Week One Done
      elsafaacompany earned a badge
      Week One Done
    • Week One Done
      Yianis earned a badge
      Week One Done
    • Veteran
      Travesty went up a rank
      Veteran
    • One Month Later
      somar86 earned a badge
      One Month Later
    • Week One Done
      somar86 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      260
    3. 3
      +Edouard
      186
    4. 4
      +FloatingFatMan
      177
    5. 5
      snowy owl
      132
  • Tell a friend

    Love Neowin? Tell a friend!